SVAT CV1002DVR Manual de usuario
SVAT ELECTRONICS
Now You Can See
HandheldDVRSystem
w/ColorPinholeCamera
COMPLETE SYSTEM
InstructionManual
Model #
CV1002DVR
www.svat.com
Graphic Symbol Explanation:
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE
CV1002DVR www.svat.com
SVAT ELECTRONICS
Now You Can See
PRODUCT W
PRODUCT WARRANTY
ARRANTY & REGISTRA
& REGISTRATION
TION
Please visit our website at www.svat.com to apply for your
products warranty registration.
The warranty registration for is located under the support tab on the SVAT website.
We take quality very seriously. This is why all of our products come with a one year warranty from the
original purchase date against defects in workmanship and materials.
If you have warranty or support issues please contact us using any of the following methods:
SVAT Electronics USA SVAT Electronics Canada Phone: 866.946.7828
2315 Whirlpool St., Unit 333 4080 Montrose Road Fax: 888.771.1701
USA 14305 Canada L2H 1J9 Website: www.svat.com
Warranty Terms
1. SVAT products are guaranteed for a period of one year from the date of purchase against defects in
workmanship and materials. This warranty is limited to the repair, replacement or refund of the purchase price
at SVAT's option.
2. When service is required, the warranty is validated by the submission of a fully completed warranty card.
3. This warranty becomes void if the product shows evidence of having been misused, mishandled or tampered
with contrary to the applicable instruction manual.
4. Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the terms of this
warranty.
5. The warranty expressly provided for herein is the sole warranty provided in connection with the product itself
and no other warranty, expressed or implied is provided. SVAT assumes no responsibilities for any other
claims not specifically mentioned in this warranty.
6. This warranty does not cover the shipping cost, insurance or any other incidental charges.
7. You MUST call SVAT before sending any product back for repair. You will be given a Return Authorization
number. When returning the product for warranty service, please pack it carefully in the original box with all
supplied accessories, and enclose your original receipt or copy, and a brief explanation of the problem
(include RA #).
8. This warranty is valid only in Canada and the U.S.A.
9. This warranty card cannot be re-issued.
CAUTION
RISK OF ELECTRIC SHOCK, DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CV1002DVR 1
SVAT ELECTRONICS
Now You Can See
T
TABLE OF CONTENTS
ABLE OF CONTENTS
WHAT IS INCLUDED & COMPATIBLE ................................1
FEATURES............................................................................2
PARTS OF THE SYSTEM ....................................................3
CONTROL PANEL FUNCTIONS ..........................................4
INSTALLATION ..................................................................4-5
MAIN SETUP ..................................................................6-10
VIDEO RECORDING ....................................................11-12
SWITCHING BETWEEN STORAGE DEVICES..................13
PLAYBACK ....................................................................13-14
CONNECTING WITH PC....................................................14
BATTERY CHARGING MODE............................................14
HOW TO USE POWER SUPPLY PROPERLY ..................15
HOW TO USE THE PVR PROPERLY................................16
USING EXTERNAL STORAGE MEDIA ........................17-19
SYSTEM REQUIREMENTS................................................19
TROUBLESHOOTING ........................................................20
SPECIFICATIONS..........................................................21-22
WHA
WHAT IS INCLUDED
T IS INCLUDED
WHA
WHAT IS COMP
T IS COMPA
ATIBLE
TIBLE
The CV1002DVR is compatible with TVs, VCRs, computers and other SVAT systems including:
- 512MB CF Card
- Earphones
- Carrying Pouch
- Wrist Strap
- Mounting Hardware
- 1 Year Warranty
- Instruction Manual
- Online/Toll Free Tech Support
1 Portable DVR 1 Color Camera
CMOSIRCO CMOS2CO CMOSBW WSE103C WSE201C
USB 2.0 A/B Cable 3.5mm to
RCA (male) wire
2 Power Adapters
33" Extension
Wire
CV1002DVR 2
SVAT ELECTRONICS
Now You Can See
Do not Plug and unplug the power cord, it may result product malfunction.
Do not install the product in an environment where the humidity is high.
Unless the product is waterproof or weatherproof, otherwise poor image quality may occur.
Do not drop the product or subject them to physical shocks.
Except for vandal-proof or shockproof product, otherwise malfunctions may occur.
Never keep the product to direct strong light.
It can damage the product.
Do not spill liquid of any kind on the product.
If it gets wet, wipe it dry immediately. Alcohol or beverage can contain minerals that
corrode the electronic components.
Do not install the product in extreme temperature conditions.
Use the camera under conditions where temperatures are between 41°F ~ 113°F. Be
especially careful to provide ventilation when operating under high temperatures.
FEA
FEATURES
TURES
• Supports NTSC or PAL video system.
• Supports 1 channel video and 1 channel audio recording and playback operation.
• Video/audio data can be recorded directly on the CF card / 1.8” HDD (sold
separately) using ASF file format.
• Using a USB 2.0 port to connect this product to PC allows high speed transfer of
images and data.
• The product saves images as .ASF (MP4) format with time stamp which can be easily
played not only on the PVR but also on a PC.
• Recording mode supports manual, motion detection, and schedule recording mode
• Different video size and quality selectable.
• For motion detection, multiple detection blocks and appropriate motion trigger level can
be set up.
• Support key lock function.
• Use anywhere, the device supports both AC power adapter and Rechargeable
Li-Ion Capacity.
CV1002DVR 3
SVAT ELECTRONICS
Now You Can See
1. 2.5" LCD Display
2. ESC Button
Exits out of the menu when changing the settings
3. Recording Status Indicator
Lights up red when in record mode
4. Navigational Buttons/Fast Forward & Rewind
Used to navigate through the menu, these buttons
are also used to control the playback of a
recorded movie
5. Mark Button
Used to highlight specific movies recorded
6. CF/HDD Switch
Switch between your CF Card and the optional
Hard Drive (Sold separately)
7. Setup Button
Changes the settings of the movies
8. Charging Status Indicator
Lights up red when charging, blinks on low battery
9. Enter/Play & Pause Button
Controls the playback of the movies recorded
10. AV Out
Connect TV audio/video with AV Out to view
movies recorded on your TV
11. AV In
Connects a camera
12. Reset Button
Resets settings to factory defaults
13. USB Port
Transfer movies to your computer via USB cable
14. Power Jack
15. Power On/Off
16. Lock/Record
Lock function to stop other functions from being
activated while on, also used to record
17. Volume Control Button
18 Optional HDD Add-On Slot (Sold Separately)
Available 20GB hard drive add-on
19. CF Card Slot
Insert your CF card into this slot on the bottom for
storage of your movies
CV1002DVR 4
SVAT ELECTRONICS
Now You Can See
Control Panel functions
Installation (Spy Eye Camera)
1.There are two cables connected to the camera – the yellow video cable and the black
power cable. Plug the corresponding ends of these cables into the 30 ft RCA/POWER
cable. Plug the opposite end of the RCA/POWER cable into the 9-volt power adapter.
Plug the power adapter into the wall.
SETUP From main menu to any function’s settings and initial settings.
CF~HDD Storage media switching: between CF card and HDD.
MARK Select file: By selecting the file you want to edit, Mark it and
then you can delete files.
?/ESC Exit: leave the current running screen, and go back to the
previous screen.
Select functions and PLAY button.
CV1002DVR 5
SVAT ELECTRONICS
Now You Can See
Installation - PVR
1.If you are using the HDD (sold separately), refer to section 9.1 for hard drive
installation and warnings.
2.If you are using the included CF card, insert it into the bottom slot of the PVR.
3.Insert the black end of the RCA adapter into the AV IN jack. Insert the yellow end into
the remaining yellow jack of the RCA/POWER cable connected to your camera. Since
the included camera does not have audio, there is no need to plug in the red or white
RCA plugs.
4.Insert the power adapter plug into the PVR, and the other end into the nearest AC
outlet.
Powering On
1. Power on your PVR by pressing and holding the power button for 2 seconds.
2.The welcoming screen will be displayed, then the PVR will enter live view mode. Your
camera’s image should be displayed.
Welcoming Image Live View Mode
CV1002DVR 6
SVAT ELECTRONICS
Now You Can See
1. MAIN SETUP
1. MAIN SETUP
Under live view mode, you can press SETUP key to enter the page of setting up basic
functions. Then, press ESC key to enable your setting and back to live view mode. In the
page of main setup, please use RIGHT / LEFT button to select value for each option.
Some of them should be entered to submenu through pressing PLAY key. It will be
introduced in the following section.
1.1 Main setup page 1
1. Resolution: Use the left and right buttons to select the desired resolution (352x240,
704/240). A higher resolution will result in better video quality but will increase video file
size.
2. Quality: Use the left and right buttons to select the desired video quality
(Low/Medium/High). Higher quality video will result in larger file sizes.
3. Rec Time: Use the left and right buttons to select the desired recording time (from 1-4
hours). For example, if you choose a value of 2, your PVR will automatically stop
recording after 2 hours. Select CANCEL to record continuously.
4. Display: The video display can be switched between LCD display and TV display
(when the PVR is connected to the TV). This setting can be reset by powering the unit
off, and then on. Refer to Section 1.2 for more information.
5. TV Out: Select between NTSC and PAL video standard. NTSC is the standard used in
North America.
CV1002DVR 7
SVAT ELECTRONICS
Now You Can See
1.2 TV Playback
Connecting to TV: Use the AV Out port to connect the PVR to a TV. This will allow you
to play MPEG 4 video directly on your TV. Insert the black end of the RCA plug into the
AV OUT jack. Insert the red, white, and yellow ends into the TV. Make sure they are
plugged into the VIDEO IN ports. Place the TV on the VIDEO INPUT channel to watch
your PVR footage.
1.3 Main Setup Page 2
Scroll down the setup page to display setup page 2.
1.Time Setup: To set up the date/time, press PLAY on this option, then use the up/down
arrows to set the correct date and time. Use the left and right arrows to move to each
item.
2.Brightness: To adjust the brightness of the LCD display, press the left and right
buttons (Lowest, Low, Normal, High, Highest).
CV1002DVR 8
SVAT ELECTRONICS
Now You Can See
3.Format Storage: Use the left and right buttons to select the drive you would like to
format (HDD or CF). Press the play button and select YES to confirm your selection.
4.Reset to Default: Pressing the play button will reset the PVR to its factory default settings.
5.Update Firmware: This device supports firmware upgrades. They may become
available from time to time at www.svat.com. First make sure the CF card that contains
the NEW VERSION file is inserted into the slot. Also make sure that the device is
plugged into the AC Adapter. Press the play button, and then select YES to confirm the
upgrade. The upgrade will take between 3-5 minutes. Do not remove the CF card or
unplug the AC Adapter during this time, as it could permanently damage your PVR.
Tabla de contenidos
Otros manuales de DVR de SVAT
SVAT
SVAT CV0104DVR Manual de usuario
SVAT
SVAT CLEARVU4 Manual de usuario
SVAT
SVAT PI300-SD Manual de usuario
SVAT
SVAT 11012 Manual de usuario
SVAT
SVAT CV1010 Manual de usuario
SVAT
SVAT CV1002 Manual de usuario
SVAT
SVAT CLEARVU1 Manual de usuario
SVAT
SVAT ClearVu CVDVR200 Manual de usuario
SVAT
SVAT CV101DVR Manual de usuario
SVAT
SVAT PI300-SD Manual de usuario
