Supero Super P6DNF Manual de usuario

SUPER

Dual Pentium Pro Processor

SUPER P6DNF

Single Pentium Pro Processor

SUPER P6SNF

USER’S MANUAL

Revision 2.1

The information in this User’s Manual has been carefully reviewed and is believed to be

accurate. The vendor assumes no responsibility for any inaccuracies that may be

contained in this document, makes no commitment to update or to keep current the

information in this manual, or to notify any person or organization of the updates.

SUPER P6DNF/P6SNF reserves the right to make changes to the product described in this

manual at any time and without notice. This product, including software, if any, and

documentation may not, in whole or in part, be copied, photocopied, reproduced, translated

or reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPER P6DNF/P6SNF BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR

INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT HAVE

LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE

PRODUCT, INCLUDING THE COSTS OF THE REPAIRING, REPLACING, OR

RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Printed in the United States of America.

Unless you request and receive written permission from SUPER P6DNF/P6SNF, you may

not copy any part of this document.

Intel i386 and Pentium Pro are trademarks and Intel is a registered trademark of Intel Corporation.

AMI is a trademark of American Megatrend, Inc. Novell is a registered trademark of

Novell, Inc. SUPER P6DNF/P6SNF is a trademark of SUPER P6DNF/P6SNF. UNIX is

a registered trademark of UNIX Systems Laboratories. Windows, Windows NT and Win-

dows 95 are trademarks and Microsoft, MS-DOS and XENIX are registered trademarks of

Microsoft Corporation. AT, IBM, OS/2 and PS/2 are registered trademarks of International

Business Machines Corporation.

All products and company names not mentioned above are trademarks or registered

trademarks of their respective holders.

Do not upgrade the BIOS unless you are notified to do so. Please call technical

support first before upgrading the boot-block BIOS.

SUPER BBS # (408) 451-1114 (24 hours)

Baud Rate: 1200-14400 bps, Data Bits: 8, Stop Bit: 1, Parity: None

iii

Preface

About This Manual

This manual is written for system houses, PC technicians and

knowledgeable PC end users. It provides information for the instal-

lation and use of the SUPER™ P6DNF/P6SNF motherboard, which

supports the 200/180/166/150 and >200 MHz Intel®Pentium® Pro

processors.

The Pentium Pro processor has two 64-bit data buses. One bus

interconnects to the built-in L2 cache and the other is an external

bus that interconnects with the system memory, I/O and the other

processor. Both come with ECC (Error Checking and Correction)

allowing for the correction of single-bit data errors and detection of

2-bit errors on the data bus.

Manual Organization

Chapter 1, Introduction, describes the features, specifications and

performance of the SUPER P6DNF/P6SNF system board, provides

detailed information about the chipset, and offers warranty informa-

tion.

Refer to Chapter 2, Installation, for a list of the equipment needed

for a system based on the SUPER P6DNF/P6SNF system board.

This chapter provides you with the instructions for handling static-

sensitive devices, checking and/or configuring the jumpers. Read

this chapter when you want to install or remove SIMM memory mod-

ules and to mount the system board in the chassis. Also refer to

this chapter to connect the floppy and hard disk drives, IDE inter-

face, parallel port, serial ports, as well as the cables for the power

supply, reset cable, Keylock/Power LED, speaker and keyboard.

If you encounter any problem, please see Chapter 3, Troubleshoot-

ing, which describes troubleshooting procedures for video, memo-

ry, and the setup configuration stored in memory. Instructions are

also included on contacting a technical assistance support repre-

sentative and returning merchandise for service and the BBS# for

BIOS upgrades .

SUPER P6DNF/P6SNF User's Manual

Preface

Table of Contents

Preface

About This Manual ......................................................................................... iii

Manual Organization...................................................................................... iii

Chapter 1:

1-1 Overview............................................................................................... 1-1

SUPER P6DNF Motherboard Layout........................................ 1-4

SUPER P6SNF Motherboard Layout........................................ 1-5

SUPER P6DNF/P6SNF System Board Architecture.............. 1-6

Features......................................................................................... 1-7

1-2 Power Supply ...................................................................................... 1-9

1-3 Chipset Overview................................................................................ 1-9

1-4 National Semiconductor 87306 ..................................................... 1-10

1-5 Voltage Regulator Modules ............................................................ 1-10

1-6 System Overheat Thermal Control ................................................ 1-11

1-7 Warranty, Technical Support, and Service.................................. 1-12

Parts.............................................................................................. 1-12

BIOS .............................................................................................. 1-12

Labor............................................................................................. 1-12

Returns......................................................................................... 1-12

Chapter 2: Installation

2-1 SUPER P6DNF/P6SNF System Components.............................. 2-1

Standard System Configuration ................................................ 2-1

Enhanced System Configuration .............................................. 2-2

2-2 Static-Sensitive Devices ................................................................... 2-2

Precautions ................................................................................... 2-2

Unpacking...................................................................................... 2-3

2-3 Configuring System Board Jumpers.............................................. 2-3

Manufacturing Settings ............................................................... 2-3

Changing the CPU Speed ......................................................... 2-4

2-4 Mounting the Motherboard in the Chassis................................... 2-4

2-5 Connecting Cables............................................................................ 2-4

Power Supply Connectors.......................................................... 2-5

Turbo Function.............................................................................. 2-5

Reset Cable Connector .............................................................. 2-7

Keylock/Power LED Cable Connector ..................................... 2-7

Keyboard Connector .................................................................... 2-8

Thermal Control Connector ....................................................... 2-8

Hard Drive LED ............................................................................ 2-9

Speaker Cable Connector.......................................................... 2-9

PS/2 Keyboard and Mouse Ports ........................................... 2-10

Serial Ports.................................................................................. 2-10

Back-up Cooling Fan and Buzzer Connectors ..................... 2-11

2-6 Installing/Removing the SIMM Modules ...................................... 2-12

SIMM Module Installation.......................................................... 2-12

Removing SIMM Modules ......................................................... 2-13

2-7 Connecting Floppy and Hard Disk Drives.................................. 2-14

Parallel Port Connector ............................................................ 2-15

Floppy Connector ....................................................................... 2-16

IDE Interfaces ............................................................................. 2-17

Chapter 3: Troubleshooting

3-1 Troubleshooting Procedures ........................................................... 3-1

No Video ........................................................................................ 3-1

Troubleshooting Flowchart ........................................................ 3-2

Memory Error................................................................................. 3-3

Losing the System’s Setup Configuration.............................. 3-3

3-2 Technical Support Procedures........................................................ 3-4

3-3 Returning Merchandise for Service................................................ 3-4

Table of Contents

vii

SUPER P6DNF/P6SNF User's Manual

viii

1-1

Chapter 1: Introduction

Chapter 1

Introduction

1-1 Overview

SUPER™ P6DNF/P6SNF is a high performance, function-enhanced

computer system board based on Intel®Pentium® Pro 200/180/166/

150 MHz processors. SUPER P6DNF/P6SNF incorporates Intel

440FX chipset. It supports dual processing (SUPER P6DNF) and

FPM or EDO memory of up to 1GB.

The Pentium Pro processor is Intel’s top-of-the-line generation of

performance for servers, workstations, and high-end desktops. It

delivers its superior performance through its Dynamic Execution

microarchitecture which allows multiple branch prediction, dataflow

analysis and speculative execution.

The Pentium Pro processor includes 16KB of internal cache and an

integrated 256KB or 512KB non-blocking secondary cache in the

same package. Having the L2 cache inside the package will not

only save space, it will also have the CPU core communicating with

the L2 cache at full speed. Non-blocking means that the transac-

tions on the processor bus do not block subsequent bus transac-

tions. For example, when a cache miss occurs, the processor will

continue to process other instructions while initiating a bus trans-

action to satisfy the cache miss. These instructions could generate

additional cache misses which could cause more bus transactions.

The Pentium Pro processor can maintain up to four concurrent re-

quests of the bus.

The general purpose registers of the Pentium Pro processor are

the same as on previous generations. The processor bus achieves

high bus efficiency by providing support for multiple, pipelined

transactions and deferred replies. A single processor may have up

to 4 outstanding transactions at the same time. There are a variety

1-2

SUPER P6DNF/P6SNF User’s Manual

of wider datapaths both inside and outside the chip. It has an

external 64-bit bus in order to communicate more efficiently with the

system memory. The package have two cavities with about 21 mil-

lion transistors. The larger one is the CPU core with 5.5 million

transistors. The smaller one is the non-blocking cache which con-

tains 15.5 million transistors.

Peripheral Component Interconnect (PCI) provides industry-leading

performance and compatibility. The 32-bit, 33 MHz pathway to the

CPU offers performance unmatched by other bus architectures. The

PCI standard is clearly defined to ensure complete compatibility. A

PCI add-on card available today will work in any PC-compliant sys-

tem in the future. The PCI add-on card interface is processor inde-

pendent. This will enable an efficient transition to future processor

generations and use with multiple processor architecture.

In addition to the security of a true standard, PCI add-on cards fea-

ture auto-configurability for easy integration. The user-friendly BIOS

automatically allocates system resources for add-on cards and con-

figures hard disk, memory, and other peripherals. No more

hassles with settings, jumpers, or switches. Just plug in the card

and go (Plug and Play or PnP).

The motherboard’s four 32-bit slots with industry standard PCI de-

sign have a very high performance capability that provides an ideal

system board solution for a wide range of demanding applications;

such as networking multiuser environments, computer aided

design (CAD), computer aided manufacturing (CAM), computer-

aided engineering (CAE), database management, desktop publish-

ing, image processing, and artificial intelligence. The

motherboard’s additional four ISA slots provide standard 16-bit

compatibility for AT-type add-on card expansion.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Supero

Supero

Supero PDSBM-LN1 Manual de usuario

Supero

Supero X7SBA Manual de usuario

Supero

Supero SUPER P6DLS Manual de usuario

Supero

Supero PDSM4+ Manual de usuario

Supero

Supero Supero X9DRW-7TPF Manual de usuario

Supero

Supero SUPERO X8DTG-QF Manual de usuario

Supero

Supero X9DR3-LN4F+ Manual de usuario

Supero

Supero X8DTG-DF Manual de usuario

Supero

Supero H8DGi Manual de usuario

Supero

Supero C7Z370-CG-L Manual de usuario

Supero

Supero P8SAA Manual de usuario

Supero

Supero X9SCE-F Manual de usuario

Supero

Supero SUPER X7SPA-L Manual de usuario

Supero

Supero H8SSL-i2 Manual de usuario

Supero

Supero X9DRL-3F Manual de usuario

Supero

Supero C7Q67 Manual de usuario

Supero

Supero X5DMS-6GM Manual de usuario

Supero

Supero C7P67 Manual del operador

Supero

Supero X10SLQ Manual de usuario

Supero

Supero C7Z170-SQ Manual de usuario

Supero

Supero H8DCL-i Manual de usuario

Supero

Supero X9DAi Manual de usuario

Supero

Supero X6DAL-G Manual de usuario

Supero

Supero X7DVL-3 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario