Supero SC742i Manual de usuario
1.0b
SC742 CHASSIS
USER'S GUIDE
742S
742i
1-2
SC742 Chassis User’s Guide
The information in this User’s Guide has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of
this manual, please see our web site at www.supermicro.com.
SUPERMICRO COMPUTER reserves the right to make changes to the product described in this
manual at any time and without notice. This product, including software, if any, and documenta-
tion may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any
medium or machine without prior written consent.
IN NO EVENT WILL SUPERMICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING
THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING
SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between
manufacturer and customer shall be governed by the laws of Santa Clara County in the State of
California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the
resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price
paid for the hardware product.
Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2005 by SUPER MICRO COMPUTER INC.
All rights reserved.
Printed in the United States of America
1-3
Chapter 1: Safety Information and Technical Specifications
Table of Contents
Chapter I: Safety Information and Technical Specifications ................ 1-4
1-1. Safety Information.................................................................................. 1-4
1-2. Technical Specifications........................................................................ 1-6
A. 742 SATA Back Panel ....................................................................... 1-6
B. SCA742-E2 SCSI Dual Channel Back Panel (w/GEM318)......................... 1-8
C. SCA 742 SCSI Single Channel Back Panel (w/GEM359)......................... 1-10
D. SCSI (Super) GEM Driver Installation (*for the Windows OS)................. 1-12
Chapter 2: Installation Instructions......................................................... 2-1
1-4
SC742 Chassis User’s Guide
1-1 Safety Information
Electric Static Discharge (ESD) can damage electronic components.
To prevent damage to your system board, it is important to handle
it very carefully. The following measures are generally sufficient to
protect your equipment from ESD.\
Static-Sensitive Devices
• Use a grounded wrist strap designed to prevent static discharge.
• Touch a grounded metal object before removing the board from the antistatic
bag.
• Handle the board by its edges only; do not touch its components, peripheral
chips, memory modules or gold contacts.
• When handling chips or modules, avoid touching their pins.
• Put the motherboard and peripherals back into their antistatic bags when not in
use.
• For grounding purposes, make sure your computer chassis provides excellent
conductivity between the power supply, the case, the mounting fasteners and
the motherboard.
• Use only the correct type of onboard CMOS battery as specified by the manu-
facturer. Do not install the onboard battery upside down to avoid possible explo-
sion.
An important note to the user
All images and graphics shown in this manual were based upon the latest chas-
sis Revision available at the time of publishing. The chassis you’ve received may
or may not look exactly the same as the ones shown in this manual.
Chapter 1-Safety
1-5
Chapter 1: Safety Information and Technical Specifications
To avoid personal injury and property damage, please carefully
follow all the safety steps listed below:
Before accessing the chassis:
1. Turn off all peripheral devices connected to the SC742.
2. Press the power button to power off the system.
3. Unplug all power cords from the system or the wall outlets.
4. Disconnect all the cables and label the cables for easy identification.
5. Use a grounded wrist strap designed to prevent static discharge when
handling components.
Removing the chassis covers:
After completing the above steps, you can remove the covers and install compo-
nents/peripheral devices into the chassis as described in Chapter 2.
1. Unlock and remove the screws and fasteners to remove the cover or
components.
2. Save all the screws and fasteners for later use. (If necessary, label these
screws or fasteners for easy identification.)
3. Follow the instruction given in Chapter 2 to remove the chassis covers.
Reinstalling the chassis covers:
To maintain proper system cooling and airflow, do not operate the system without
installing all chassis covers back to the chassis. To reinstall the chassis covers, please
follow the steps listed below:
1. Make sure that all components and devices are securely fastened
on the chassis and there are no loose parts/screws inside the chassis.
2. Make sure that all cables are properly connected to the connectors and ports.
3. Use the original screws or fasteners to install the covers to the chassis.
4. Be sure to lock to the chassis or the system to prevent unauthorized access.
5. For proper cooling, enclose the chassis with covers before operating the
system.
Using the Chassis Handles properly:
The chassos handles are for sliding the chassis in and out of the
racks only. Do not carry the chassis by the handles.
STOP
1-6
SC742 Chassis User’s Guide
1-2 Technical Specifications
A. 742 SATA Back Panel
A-1 Connector/Jumper Locations
Front View
A-2 Connectors
D3: Overheat LED Indicator
J5: SATA #0 J6: SATA#1
J7: SATA #2 J8: SATA#3
J10: SATA #4 J12: SATA#5
J14: SATA #6
SATA#0 Act In
SATA#5 Act In
1
x
SATA#1 Act In
2
SATA#4 Act In
910
SATA#6 Act In SATA#2 Act In
SATA#3 Act In
x
Act In (JP26) Pin Definitions
x
JP10/ JP13: 4-Pin PWR Connectors JP26: ACT In
199.70MM
135.00MM
JP25
11
JP18
D3
J5
J6
J7
J8
J10
J12J14
JP26
JP13JP10
4-Pin
PWR
4-Pin
PWR
+12V
1
Ground
4
Ground
+5V
4-Pin PWR Connectors
Pin Definitions
2
3
1-7
Chapter 1: Safety Information and Technical Specifications
A-3 Jumpers
JP18: Buzzer Reset
Rear View (*Not drawn to scale)
A-4 Connector/LED Indicator Locations (Rear Side)
A-5 Activity LED Indicators
D22
D21
D18
D15
D14
D13
D12
J1 J2 J3 J4 J9 J11
JP25: Overheat LED
1-8
SC742 Chassis User’s Guide
B. SCA 74-E2 SCSI Dual Channel Back Panel (W/GEM318)
Front View (*Not Drawn to Scale)
B-1 Connector/Jumper Locations
B-2 Connectors
JP10/JP15: 4-Pin PWR Connectors
+12V
1
Ground
4
Ground
+5V
4-Pin PWR Connectors
Pin Definitions
2
3
B-3 Jumpers
JP18: Buzzer Reset
JP23
JP20
JP14
JP22
JP18
SCSI Chan. A
SCSI Chan.B
JP15
JP10
SCSI Channel A Jumpers
SCSI Channel B Jumpers
1-9
Chapter 1: Safety Information and Technical Specifications
B-4 Connector/LED Indicator Locations (Rear)
Rear View (*Not drawn to scale)
D24
D25
D23
D20
D22
D15
D17
D14
D13
D16
D6
D12
D5 Ch. A-ID#0
Ch. A-ID#1
Ch. A-ID#2
Ch. B-ID#0
Ch. B-ID#1
Ch. B-ID#2
Ch. B-ID#3
D21
B-5 LED Indicators (Rear)
SCSI Drive Fail LED Indicators
SCSI Drive Activity LED Indicators
1-10
SC742 Chassis User’s Guide
C. SCA 742 SCSI Single Channel Back Panel (w/GEM359)
Front View (*Not Drawn to Scale)
C-1 Connector/Jumper Locations
C-2 Connectors
JP10/JP26: 4-Pin PWR Connectors
+12V
1
Ground
4
Ground
+5V
4-Pin PWR Connectors
Pin Definitions
2
3
C-3 Jumpers
JP19: Buzzer Reset
SCSI
JP26
JP10 JP19
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Chasis de Supero
Supero
Supero SC747TQ-R1400B Manual de usuario
Supero
Supero Supero SC825 Series Manual de usuario
Supero
Supero Supero SC512 Series Manual de usuario
Supero
Supero SC748TQ-R1200B Manual de usuario
Supero
Supero SC828 Series Manual de usuario
Supero
Supero SC836TQ - R800V(B) Manual de usuario
Supero
Supero Supero SC512 Series Manual de usuario
Supero
Supero SC510-200B Manual de usuario
Supero
Supero Supero SC836 Series Manual de usuario
Supero
Supero SC113 Series Manual de usuario
Supero
Supero SC743i-645 Manual de usuario
Supero
Supero SC502L-200B Manual de usuario
Supero
Supero SC836A-R1200B SC836E1-R800BSC836E1-R800V Manual de usuario
Supero
Supero SC219 Chassis Series Manual de usuario
Supero
Supero SC835 Chassis Series Manual de usuario
Supero
Supero SC835TQ Manual de usuario
Supero
Supero SC503 Series Manual de usuario
Supero
Supero SC513-L260 Series Manual de usuario
Supero
Supero SC827HD-R1400B Manual de usuario
Supero
Supero SC847A-R1400LPB Manual de usuario
