Supero AOC-MTG-b2T Manual de usuario
Preface
User's Guide
Revision 1.0
AOC-MTG-b2T
AOC-MTG-b2T Add-on Card User's Guide
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor
assumes no responsibility for any inaccuracies that may be contained in this document, and makes no
commitment to update or to keep current the information in this manual, or to notify any person or organization
of the updates. Please Note: For the most up-to-date version of this manual, please see our website at
www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this
manual at any time and without notice. This product, including software and documentation, is the property of
Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is
not allowed, except as expressly permitted by the terms of said license.
IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS
PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN
PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,
SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING,
REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County
in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for
the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for
the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s
instruction manual, may cause harmful interference with radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference, in which case you will be required to correct the
interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies
only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling
may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this product may expose you to lead, a
chemical known to the State of California to cause birth defects and other reproductive harm.
The products sold by Supermicro are not intended for and will not be used in life support systems, medical
equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or
other critical systems whose failure to perform be reasonably expected to result in signicant injury or loss of life or
catastrophic property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell
such products for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer
agrees to fully indemnify, defend and hold Supermicro harmless for and against any and all claims, demands,
actions, litigation, and proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
Manual Revision 1.0
Release Date: March 7, 2018
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part
of this document. Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2018 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
Preface
Preface
About this User's Guide
This user's guide is written for system integrators, IT professionals, and
knowledgeable end users. It provides information for the installation and use of the
AOC-MTG-b2T add-on card.
An Important Note to the User
All graphic images and layout drawings shown in this user's guide are based upon
the latest PCB revision available at the time of publishing of this user's guide. The
add-on card you have received may or may not look exactly the same as the graph-
ics shown in this user's guide.
Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is required before
any warranty service will be rendered. You can obtain service by calling your ven-
dor for a Returned Merchandise Authorization (RMA) number. When returning the
motherboard to the manufacturer, the RMA number should be prominently displayed
on the outside of the shipping carton, and the shipping package is mailed prepaid
or hand-carried. Shipping and handling charges will be applied for all orders that
must be mailed when service is complete. For faster service, you can also request
a RMA authorization online (http://www.supermicro.com/RmaForm/).
This warranty only covers normal consumer use and does not cover damages in-
curred in shipping or from failure due to the alternation, misuse, abuse or improper
maintenance of products.
During the warranty period, contact your distributor rst for any product problems.
Conventions Used in the User's Guide
Pay special attention to the following symbols for proper system installation and to
prevent damage to the system or injury to yourself:
Warning: Important information given to ensure proper system installation
or to prevent damage to the components or injury to yourself.
Note: Additional information given to differentiate between various models
or provides information for correct system setup.
iii
AOC-MTG-b2T Add-on Card User's Guide
Naming Convention
SMC Networking Add-on Cards
Naming Convention for SIOM Network Adapters
A O C – M TG – b 2 T
1 – 2 3 – 5 6 8
Character Representation Options
1st Product Family AOC: Add On Card
2nd Form Factor S: Standard, P: Proprietary, C: MicroLP,
M: Super IO Module (SIOM), MH: SIOM Hybrid
3rd Product Type/Speed G: GbE (1Gb/s), TG: 10GbE (10Gb/s), 25G: 25GbE (25Gb/s),
40G: 40GbE (40Gb/s), 50G: 50GbE (50Gb/s), 100G: 100GbE
(100Gb/s), IBE: EDR IB (100Gb/s), IBF: FDR IB (56Gb/s),
IBQ: QDR IB (40Gb/s), HFI: Host Fabric Interface
4th Chipset Model (Optional) N: Niantec (82599), P: Powerville (i350), S: Sageville (X550)
5th Chipset Manufacturer (Optional) i: Intel, m: Mellanox, b: Broadcom
6th Number of Ports 1: 1 port, 2: 2 ports, 4: 4 ports
7th Connector Type (Optional) S: SFP+/SFP28, T: 10GBase-T, Q: QSFP+, C: QSFP28
8th 2nd Controller/Connector Type
(Optional)
G: GbE RJ45, S: 10G SFP+, T: 10GBase-T
iv
Preface
Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: +1 (408) 503-8000
Fax: +1 (408) 503-8008
Email: [email protected] (General Information)
Web Site: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: +31 (0) 73-6400390
Fax: +31 (0) 73-6416525
Email: [email protected] (General Information)
Web Site: www.supermicro.nl
Asia-Pacic
Address: Super Micro Computer, Inc.
3F, No. 150, Jian 1st Rd.
Zhonghe Dist., New Taipei City 235
Taiwan (R.O.C)
Tel: +886-(2) 8226-3990
Fax: +886-(2) 8226-3992
Web Site: www.supermicro.com.tw
vi
AOC-MTG-b2T Add-on Card User's Guide
Table of Contents
Preface
Chapter 1 Overview
1-1 Overview ......................................................................................................... 1-1
1-2 About this Add-on Card................................................................................... 1-1
1-3 Key Features................................................................................................... 1-1
1-4 Technical Specications .................................................................................. 1-2
General............................................................................................................ 1-2
Host Interface.................................................................................................. 1-2
Networking Features ....................................................................................... 1-2
Stateless Ofoad Features ............................................................................. 1-3
NIC partitioning (NPAR) .................................................................................. 1-3
Virtualization Features..................................................................................... 1-3
Manageability .................................................................................................. 1-4
Flow Processingt............................................................................................. 1-4
Data Center Bridging ...................................................................................... 1-4
Power Savings ............................................................................................... 1-4
Power Consumption........................................................................................ 1-4
Physical Dimensions ....................................................................................... 1-5
Operating Conditions ..................................................................................... 1-5
1-5 Compliance/Operating Environment ............................................................... 1-5
1-6 Available SKUs ............................................................................................... 1-5
Chapter 2 Hardware Components
2-1 Add-On Card Image and Layout..................................................................... 2-1
2-2 Jumpers and Connectors................................................................................ 2-2
2-3 LAN Ports and LAN LED Indicators................................................................ 2-3
LAN Ports ................................................................................................... 2-3
LAN Port LED Indicators............................................................................ 2-3
Chapter 3 Installation
3-1 Static-Sensitive Devices.................................................................................. 3-1
Precautions ..................................................................................................... 3-1
Unpacking ....................................................................................................... 3-1
3-2 Before Installation ........................................................................................... 3-2
3-3 Installing the Add-on Card .............................................................................. 3-2
3-4 Installing Drivers on Windows OS .................................................................. 3-5
3-5 Installing Drivers on Linux (for Broadcom BCM57416) .................................. 3-5
Linux Drivers ................................................................................................... 3-5
Windows Drivers ............................................................................................. 3-7
vii
Chapter 1: Overview
1-1
Chapter 1
Overview
1-1 Overview
Congratulations on purchasing your add-on card from an acknowledged leader in
the industry. Supermicro products are designed with the utmost attention to detail
to provide you with the highest standards in quality and performance.
1-2 About this Add-on Card
Supermicro AOC-MTG-b2T features latest Broadcom NetXtreme BCM57416 Ether-
net controller that is designed for today’s rapid growing datacenter and cloud-scale
applications. In small form factor SIOM, it features VXLAN, NVGRE, and Geneve
along with Broadcom TruFlow technology that enables users to reduce CPU loads
and increases VM densities. In addition, NPAR (NIC Partitioning) technology pro-
vides exible connectivity for different networking requirements. The Supermicro
AOC-MTG-b2T is a truly exceptional 10GbE Ethernet Adapter for your continuously
growing cloud applications and datacenters.
1-3 Key Features
The product highlights of this add-on card include the following:
• Super I/O Module (SIOM) Form Factor
• Broadcom® BCM57416 10GbE controller
• Dual RJ45 Connectors
• TruFlow
• NPAR (NIC Partitioning)
• VXLAN and NVGRE
• Low latency RDMA over Converged Ethernet (RoCE)
• Asset Management Features with thermal sensor
• RoHS compliant 6/6
1-2
AOC-MTG-b2T Add-on Card User's Guide
1-4 Technical Specications
General
• Super I/O Module (SIOM) Form Factor
• Broadcom BCM57416 dual-port 10Gbps controller
• Dual RJ45 connectors
• TruFlow Technology
Host Interface
• PCI-E 3.0 (8GT/s)
• MCTP over SMBus
• Function Level Rest (FLR) support
• Message Signal Interrupt (MSI-X)
Networking Features
• Jumbo Frames (up to 9600-byte)
• 802.3x ow control
• Link Aggregation (802.3ad)
• Virtual LANs 802.1q VLAN tagging
• Congurable Flow Acceleration
• IEEE 1588 and Time Sync
• RDMA over Converged Ethernet (RoCE)
Chapter 1: Overview
1-3
Stateless Ofoad Features
• TCP, UDP, IPv4, IPv6 checksum ofoad
• Large Send Ofoad
• Receive Segment Coalescing
• TCP Segmentation Ofoad
• Large Receive Ofoad
• Receive Side Scaling (RSS)
• Transmit Side Scaling (TSS)
NIC partitioning (NPAR)
• 16 Physical Functions
• QoS per partition
• Partitioning control via sideband communication
• Up to 64MAC/VLAN lters per partition
• Stateless ofoad conguration per partition
• VEB/VEPA support
Virtualization Features
• NetQueue, VMQueue, and Multiqueue
• Support for 128 Virtual Functions
• VXLAN
• NVGRE
• Geneve
• Edge Virtual Bridging (EVB)
1-4
AOC-MTG-b2T Add-on Card User's Guide
Manageability
• Network Controller Sideband Interface (NC-SI)
• PXE and iSCSI boot
• Asset Management with Thermal Sensors
Flow Processingt
• Exact/Wildcard Match Flow Lookup
• VLAN insertion/deletion
• NAT/NAPT
• Mirroring
Data Center Bridging
• Priority-based Flow Control (PFC; IEEE 802.1Qbb)
• Enhanced Transmission Selection (ETS; IEEE802.1Qau)
• Quantized Congestion Notication (QCN; IEEE802.1Qau)
• Data Center Bridging Capability eXchange (DCBX; IEEE802.1Qaz)
• 8 trafc classes per port, fully DCB compliant per 802.1Qbb
Power Savings
• ACPI compliant power management
• PCI Express Active State Power Management (ASPM)
• Ultra low-power mode
• Pass-through Energy Efcient Ethernet (IEEE802.3az-2010)
Power Consumption
• Maximum power consumption: 11W
Tabla de contenidos
Otros manuales de Adaptador de Supero
