Supermicro 6037R-E1R16L Manual de usuario

SUPER STORAGE SYSTEM

6037R-E1R16L

SUPER

USER’S MANUAL

1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: September 26, 2012

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the 6037R-E1R16L. Installation

and maintainance should be performed by experienced technicians only.

The 6037R-E1R16L is a high-end storage system based on the SC836E16-

R920B 3U rackmountable chassis and the X9DRD-7LN4F-JBOD dual processor

serverboard.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

system and describes the main features of the X9DRD-7LN4F-JBOD serverboard

and the SC836E16-R920B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the 6037R-E1R16L into a rack

and check out the server conﬁguration prior to powering up the system. If your server

was ordered without processor and memory components, this chapter will refer you

to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

6037R-E1R16L.

SUPERSTORAGESYSTEM 6037R-E1R16L User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X9DRD-7LN4F-JBOD serverboard,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconﬁguring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC836E16-R920B chassis. You

should follow the procedures given in this chapter when installing, removing or

reconﬁguring SATA or peripheral drives and when replacing system power supply

units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Speciﬁcations

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

SAS.................................................................................................................1-2

Serial ATA........................................................................................................1-2

PCI Expansion Slots....................................................................................... 1-2

1-3 Server Chassis Features ................................................................................1-3

System Power.................................................................................................1-3

Hard Drives.....................................................................................................1-3

Front Control Panel......................................................................................... 1-3

Cooling System...............................................................................................1-3

1-4 Contacting Supermicro....................................................................................1-6

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System.................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

Rack Precautions............................................................................................2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations.......................................................................2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ...................................................................2-4

Identifying the Sections of the Rack Rails..................................................... 2-4

Installing the Chassis Rails.............................................................................2-5

Installing the Server into the Rack.................................................................. 2-6

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons..................................................................................... 3-1

Reset...............................................................................................................3-1

Power..............................................................................................................3-1

SUPERSTORAGESYSTEM 6037R-E1R16L User's Manual

vii

3-3 Control Panel LEDs ........................................................................................3-1

Power Fail.......................................................................................................3-2

Overheat/Fan Fail ........................................................................................... 3-2

NIC1................................................................................................................3-2

NIC2................................................................................................................3-2

HDD................................................................................................................. 3-3

Power..............................................................................................................3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 System Safety

4-1 Electrical Safety Precautions..........................................................................4-1

4-2 General Safety Precautions............................................................................ 4-2

4-3 ESD Precautions............................................................................................. 4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard............................................................................... 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-2

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables................................................................................. 5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel......................................................................... 5-2

5-3 Rear I/O Ports.................................................................................................5-3

5-4 Installing the Processor and Heatsink ............................................................5-4

Installing an LGA2011 Processor....................................................................5-4

Installing a Passive CPU Heatsink .................................................................5-7

Removing the Heatsink...................................................................................5-8

5-5 Installing Memory............................................................................................5-9

Memory Support..............................................................................................5-9

DIMM Installation ............................................................................................ 5-9

5-6 Adding PCI Add-On Cards............................................................................ 5-14

5-7 Serverboard Details ...................................................................................... 5-15

X9DRD-7LN4F-JBOD Quick Reference ....................................................... 5-16

5-8 Connector Deﬁnitions ...................................................................................5-18

5-9 Jumper Settings............................................................................................ 5-25

5-10 Onboard Indicators........................................................................................5-27

5-11 SATA Ports....................................................................................................5-28

5-12 Installing Software......................................................................................... 5-29

SuperDoctor III..............................................................................................5-30

Table of Contents

viii

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

Unpacking .......................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans................................................................................................... 6-3

System Fan Failure.........................................................................................6-3

Replacing System Fans.................................................................................. 6-3

Rear Exhaust Fans......................................................................................... 6-3

6-4 Drive Bay Installation/Removal....................................................................... 6-4

Accessing the Drive Bays............................................................................... 6-4

SATA Drive Installation....................................................................................6-5

Hard Drive Backplane................................................................................ 6-6

Removing the Air Shroud................................................................................6-7

DVD-ROM Installation.....................................................................................6-8

6-5 Power Supply..................................................................................................6-9

Power Supply Failure......................................................................................6-9

6-6 Attaching a JBOD Expansion Chassis.......................................................... 6-10

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility..............................................................................7-1

How To Change the Conﬁguration Data......................................................... 7-2

Starting the Setup Utility................................................................................. 7-2

7-2 Main Setup......................................................................................................7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-4

7-4 Event Logs.................................................................................................... 7-25

7-5 IPMI............................................................................................................... 7-27

7-6 Boot............................................................................................................... 7-29

7-7 Security......................................................................................................... 7-30

7-8 Save & Exit................................................................................................... 7-31

Appendix A BIOS Error Beep Codes

Appendix B System Speciﬁcations

SUPERSTORAGESYSTEM 6037R-E1R16L User's Manual

Chapter 1

Introduction

1-1 Overview

The 6037R-E1R16L is a high-end storage system comprised of two main subsys-

tems: the SC836E16-R920B 3U/rack mount chassis and the X9DRD-7LN4F-JBOD

dual processor serverboard. Please refer to our web site for information on operating

systems that have been certiﬁed for use with the system (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the 6037R-E1R16L, as listed below:

• Two passive CPU heatsinks (SNK-P0048PS)

• Three 8-cm system fans (FAN-0126L4)

• Two rear exhaust fans (FAN-0125L4)

• One air shroud (MCP-310-39001-0N)

• SATA Accessories

One SATA backplane (BPN-SAS2-836EL1)

Sixteen drive carriers (MCP-220-00075-OB)

JBOD Expansion Port (CBL-0352L)

• One rackmount kit (MCP-290-00053-0N)

• One CD containing drivers and utilities

Note: a complete list of safety warnings is provided on the Supermicro web site at

http://www.supermicro.com/about/policies/safety_information.cfm

Chapter 1: Introduction

1-1

1-2

SUPERSTORAGESYSTEM 6037R-E1R16L User's Manual

1-2 Serverboard Features

The 6047R-E1R24L is built around the X9DRD-7LN4F-JBOD, a dual processor

serverboard based on the Intel C602J chipset. Below are the main features of the

X9DRD-7LN4F-JBOD. (See Figure 1-1 for a block diagram of the chipset).

Processors

The X9DRD-7LN4F-JBOD supports single or dual Intel® Xeon E5-2600 Series

processors. Please refer to the serverboard description pages on our web site for

a complete listing of supported processors (www.supermicro.com).

Memory

The X9DRD-7LN4F-JBOD has 16 DIMM slots that can support 512 GB of ECC

DDR3 Registered memory (RDIMM) or up to 128 GB of ECC/non-ECC DDR3

Unbuffered memory (UDIMM). See Chapter 5 for details.

SAS

A SAS 2.0 controller is integrated into the serverboard providing 8x lanes of 6Gb/s

SAS with basic HBA/ITMode controller functionality. The controller supports the

attachment of 122 SAS or SATA devices.

Serial ATA

A SATA controller is also integrated into the chipset to provide two SATA 3 (6/Gbps)

and four SATA 2 (3 Gbps) ports, which are RAID 0, 1, 5 and 10 supported. The

SATA drives are hot-swappable units.

PCI Expansion Slots

The X9DRD-7LN4F-JBOD has six PCI-E 3.0 x8 slots. The default conﬁguration

includes a port plate with dual JBOD expansion ports occupying slot #1 (PCI-E 3.0

x8). Note that expansion slots are controlled by the CPUs, so two CPUs need to

be installed to enable all PCI expansion slots. See Chapter 5 for details.

Tabla de contenidos

Otros manuales de Almacenamiento de Supermicro

Supermicro

Supermicro 6028R-E1CR12N Manual de usuario

Supermicro

Supermicro SuperStorage 6028R-E1CR12H Manual de usuario

Supermicro

Supermicro Supero 6037R-E1R16N Manual de usuario

Supermicro

Supermicro 2028R-E1CR24H Manual de usuario

Supermicro

Supermicro SuperServer 110C-FHN4T Manual de usuario

Supermicro

Supermicro SuperStorageSystem SSG-2028R-DN2R48L Manual de usuario

Supermicro

Supermicro 6048R-E1CR24N Manual de usuario

Supermicro

Supermicro 6038R-DE2CR16L Manual de usuario

Supermicro

Supermicro 6028R-E1CR12T Manual de usuario

Supermicro

Supermicro SuperServer SSG-540P-E1CTR45L Manual de usuario

Supermicro

Supermicro Supero SC847DE16-R1K28LPB Manual de usuario

Supermicro

Supermicro SUPERO SC847DJ Series Manual de usuario

Supermicro

Supermicro Supero SC847DE16-R2K02JBOD Manual de usuario

Supermicro

Supermicro SuperStorageSystem 6038R-E1CR16L Manual de usuario

Supermicro

Supermicro SUPER 6047R-E1CR36N Manual de usuario

Supermicro

Supermicro 6048R-E1CR36N Manual de usuario

Supermicro

Supermicro 2028R-ACR24H Manual de usuario

Supermicro

Supermicro 6048R-E1CR72L Manual de usuario

Supermicro

Supermicro SuperServer SYS-211E-FRN2T Manual de usuario

Supermicro

Supermicro 2028R-E1CR24L Manual de usuario

Supermicro

Supermicro 6048R-E1CR24H Manual de usuario

Supermicro

Supermicro SSG-2028R-DN2R20L Manual de usuario

Supermicro

Supermicro 6048R-E1CR24L Manual de usuario

Supermicro

Supermicro SUPER 2027R-AR24NV Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario