Supermicro H8DGU Manual de usuario

USER’S MANUAL

Revision 1.3

SUPER

H8DGU

H8DGU-F

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

and makes no commitment to update or to keep current the information in this manual, or to notify

any person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE

OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL

NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall be

the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims

will not exceed the price paid for the hardware product.

FCC Statement: Refer to Supermicro's web site for FCC Compliance Information.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.3

Release Date: March 06, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

iii

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of the

H8DGU(-F) serverboards.

The H8DGU(-F) serverboard is based on the AMD® SR5670/SP5100 chipset and

supports four AMD Socket G34 type processors with up to 128 GB of ECC/Non-

ECC Unbuffered or 512 GB of ECC Registered DIMM DDR3-1600/1333/1066 Mhz

SDRAM. The H8DGU serverboard does not have IPMI capability, whereas the

H8DGU-F serverboard does.

Please refer to the motherboard speciﬁcations pages on our web site for updates on

supported processors (http://www.supermicro.com/aplus/). This product is intended

to be professionally installed.

Manual Organization

Chapter 1 includes a checklist of what should be included in your motherboard

box, describes the features, speciﬁcations and performance of the motherboard

and provides detailed information about the chipset.

Chapter 2 begins with instructions on handling static-sensitive devices. Read this

chapter when installing the processor(s) and memory modules and when installing

the motherboard in a chassis. Also refer to this chapter to connect the hard disk

drives, the various ports, and the power and reset buttons and the system LEDs.

If you encounter any problems, see Chapter 3, which describes troubleshooting

procedures for the video, the memory and the setup conﬁguration stored in CMOS.

For quick reference, a general FAQ (Frequently Asked Questions) section is

provided. Instructions are also included for contacting technical support. In addition,

you can visit our web site for more detailed information.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Code Messages.

Appendix B lists BIOS POST Checkpoint Codes.

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

Checklist..........................................................................................................1-1

1-2 Contacting Supermicro....................................................................................1-2

H8DGU(-F) Quick Reference..........................................................................1-5

1-3 Serverboard Features..................................................................................... 1-6

1-4 Chipset Overview............................................................................................1-9

AMD SR5670/SP5100 Chipset.......................................................................1-9

HyperTransport Technology............................................................................ 1-9

1-5 PC Health Monitoring...................................................................................... 1-9

1-6 Power Conﬁguration Settings........................................................................1-10

1-7 Power Supply.................................................................................................1-11

1-8 Super I/O........................................................................................................1-11

1-9 UIO................................................................................................................ 1-12

Chapter 2 Installation

2-1 About Standardized Warning Statements.......................................................2-1

2-2 Static-Sensitive Devices..................................................................................2-4

Precautions .....................................................................................................2-4

Unpacking .......................................................................................................2-4

2-3 Processor and Heatsink Installation................................................................2-5

2-4 Mounting the Serverboard into a Chassis ......................................................2-7

2-5 Installing Memory............................................................................................2-7

DIMM Module Population Conﬁguration .................................................... 2-9

2-6 PCI Expansion Cards.................................................................................... 2-10

2-7 I/O Port and Control Panel Connections .......................................................2-11

Front Control Panel........................................................................................2-11

2-8 Connector Deﬁnitions.................................................................................... 2-12

Power Connectors.................................................................................... 2-12

Power Connector......................................................................................2-12

Reset Connector ...................................................................................... 2-13

Power Fail LED........................................................................................2-13

Overheat (OH)/Fan Fail/PWR Fail/UID LED............................................ 2-13

NIC2 (Link/Activity) LED...........................................................................2-13

NIC1 (Link/Activity) LED...........................................................................2-13

HDD LED.................................................................................................. 2-14

Power LED Connector ............................................................................. 2-14

Table of Contents

NMI Button ............................................................................................... 2-14

Universal Serial Bus Ports....................................................................... 2-14

USB Headers ........................................................................................... 2-14

Fan Headers............................................................................................. 2-15

Serial Ports...............................................................................................2-15

IPMB.........................................................................................................2-15

Unit Identiﬁer Button................................................................................. 2-15

Trusted Platform Module Header.............................................................2-16

T-SGPIO...................................................................................................2-16

Video Connector....................................................................................... 2-16

Power LED/Speaker................................................................................. 2-17

ATX PS/2 Keyboard and PS/2 Mouse Ports............................................2-17

Compact Flash Card PWR Connector..................................................... 2-17

LAN1/2 (Ethernet Ports)........................................................................... 2-18

Chassis Intrusion ..................................................................................... 2-18

Overheat LED........................................................................................... 2-18

UIO Power Connector.............................................................................. 2-19

2-9 Jumper Settings............................................................................................2-20

Explanation of Jumpers ................................................................................ 2-20

CMOS Clear............................................................................................. 2-20

I2C to PCI-Express Slot........................................................................... 2-21

Watch Dog Enable/Disable ...................................................................... 2-21

LAN1/2 Enable/Disable ........................................................................... 2-21

VGA Enable/Disable................................................................................. 2-21

2-10 Onboard Indicators........................................................................................2-22

GLAN LEDs.............................................................................................. 2-22

IPMI Dedicated LAN LEDs....................................................................... 2-22

BMC Heartbeat LED ................................................................................ 2-22

Power LED...............................................................................................2-23

UID LED (LE1) ........................................................................................ 2-23

2-11 SATA Drive Connections............................................................................... 2-23

SATA Ports ............................................................................................... 2-23

2-12 Enabling SATA RAID.....................................................................................2-24

Serial ATA (SATA)..........................................................................................2-24

Installing the OS/SATA Driver....................................................................... 2-24

Building a Driver Diskette.........................................................................2-24

Enabling SATA RAID in the BIOS.................................................................2-25

2-13 Installing Drivers............................................................................................ 2-27

H8DGU(-F) SERVERBOARD USER'S MANUAL

Table of Contents

Using the DotHill and Adaptec RAID Utility.................................................. 2-28

Installing the RAID Driver During OS Installation......................................... 2-28

Supero Doctor III........................................................................................... 2-29

2-14 Serverboard Battery...................................................................................... 2-31

Chapter 3 Troubleshooting

3-1 Troubleshooting Procedures...........................................................................3-1

Before Power On ............................................................................................3-1

No Power ........................................................................................................ 3-1

No Video .........................................................................................................3-2

Memory Errors ...............................................................................................3-2

Losing the System’s Setup Conﬁguration.......................................................3-2

3-2 Technical Support Procedures........................................................................ 3-2

3-3 Frequently Asked Questions...........................................................................3-3

3-4 Returning Merchandise for Service.................................................................3-4

Chapter 4 BIOS

4-1 Introduction...................................................................................................... 4-1

4-2 Main Menu ...................................................................................................... 4-2

4-3 Advanced Settings Menu................................................................................ 4-2

4-3 Security Menu...............................................................................................4-16

4-4 Boot Menu..................................................................................................... 4-17

4-5 Exit Menu...................................................................................................... 4-18

Appendix A BIOS Error Beep Codes

Appendix B BIOS POST Checkpoint Codes

B-1 Uncompressed Initialization Codes.................................................................B-1

B-2 Bootblock Recovery Codes.............................................................................B-2

B-3 Uncompressed Initialization Codes.................................................................B-3

Chapter 1: Introduction

1-1

Chapter 1

Introduction

1-1 Overview

Checklist

Congratulations on purchasing your computer motherboard from an acknowledged

leader in the industry. Supermicro boards are designed with the utmost attention to

detail to provide you with the highest standards in quality and performance.

Please check that the following items have all been included with your motherboard.

If anything listed here is damaged or missing, contact your retailer.

• One (1) H8DGU(-F) serverboard

• Six (6) 2ft. Amphenol, SATA cable (CBL-0044L)

• Two (2) Retention brackets (BKT-0035L)

• One (1) CD containing drivers and utilities

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your motherboard.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety information:

http://super-dev/about/policies/safety_information.cfm

• If you have any questions, please contact our support team at:

support@supermicor.com

1-2

H8DGU(-F) Serverboard User’s Manual

1-2 Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Web Site: www.supermicro.com

Asia-Paciﬁc

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Tel: +886-(2)-8226-3990

Web Site: www.supermicro.com.tw

Chapter 1: Introduction

1-3

Figure 1-1. H8DGU-F Image

1-4

H8DGU(-F) Serverboard User’s Manual

Notes:

Jumpers not indicated are for test purposes only.

Not all ports, jumpers or LED Indicators are available on all serverboards.

Figure 1-2. H8DGU-F Serverboard Layout

(not drawn to scale)

JD1

JPW1

JF1

JI2C1

JI2C2

JOH1

JL1

JWF1

JPL1

JWD

JPG1

FAN3

FAN8

FAN2

FAN1

FAN7

FAN4

FAN5

FAN6

LE1

UIOP

JPW2 JPW3

IPMB

JPI2C

DP2

BATTERY

SATA5

SATA0

SATA1

SATA2

SATA3

SATA4

T-SGPIO2

T-SGPIO1

UID

P1-DIMM4A

P2-DIMM1B

P1-DIMM4B

P2-DIMM1A

USB0/1

USB6

USB4/5 USB2/3

P1-DIMM3A

P2-DIMM2B

P1-DIMM3B

P2-DIMM2A

P1-DIMM2A

P2-DIMM3B

COM1

IPMI_LAN

PCI-E 2.0 x8 in x4 SLOT

P1-DIMM2B

P2-DIMM3A

KB/MOUSE

LAN2

LAN1

P1-DIMM1A

COM2

P1-DIMM1B

P2-DIMM4A

CPU1

CPU2

VGA

JBT1

PCI-E 2.0 x16 SLOT

Winbond

BMC

AMD

SR5670

AMD

SP5100

P2-DIMM4B

JTPM1

DP1

Otros manuales para H8DGU

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Supermicro

Supermicro

Supermicro X13DEH Manual de usuario

Supermicro

Supermicro Supero C9X299-PG300 Manual de usuario

Supermicro

Supermicro H12DSG-Q-CPU6 Manual de usuario

Supermicro

Supermicro H8SSL-i Manual de usuario

Supermicro

Supermicro X10SLA Manual de usuario

Supermicro

Supermicro X6DVA-4G2 Manual de usuario

Supermicro

Supermicro C2SBA Guía de inicio rápido

Supermicro

Supermicro X10DRL-CT Manual de usuario

Supermicro

Supermicro C7Z87 Manual de usuario

Supermicro

Supermicro X11DPH-Tq Manual de usuario

Supermicro

Supermicro X10SDV Manual de usuario

Supermicro

Supermicro H12SSG-ANP6 Manual de usuario

Supermicro

Supermicro X7DCT Manual de usuario

Supermicro

Supermicro X11SCH-LN4F Manual de usuario

Supermicro

Supermicro A2SAN-H Manual de usuario

Supermicro

Supermicro SUPERO X8ST3-F Manual de usuario

Supermicro

Supermicro X11DPH-i Manual de usuario

Supermicro

Supermicro X9SRW-F Manual de usuario

Supermicro

Supermicro X11SBA-LN4F/F Manual de usuario

Supermicro

Supermicro H13SAE-MF Manual de usuario

Supermicro

Supermicro P4DPR-iG2 Manual de usuario

Supermicro

Supermicro X11SPL-F Manual de usuario

Supermicro

Supermicro X10SLM+-F Manual de usuario

Supermicro

Supermicro X10DRi Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario