SUNTEC CP10245 Manual de usuario
Suntec Industries (H.K.) Ltd.
Tel: +852 81300676
Fax: +852 81300671
URL:www.suntecind.com
READ AND STUDY MANUAL BEFORE USE
Condensate Removal Pump
Model CP10245
For Suntec SP Series Dehumidifiers
INSTALLATION MANUAL
Outlet
(drainage tube)
1. External View
2. Specifications
Inlet
(pipe in) Power Cord
Front Side Back Side
Holder
3. Notice
Model
Max Pump Lift
Voltage/ Cycle
Power Consumption
Outlet PVC Tube (Ф4 xФ6 mm)
Dimension (L x W x H)
More than 2M
AC 220-240V / 50Hz
23W
5M
180 x 150 x 105mm
Using Ф4 xФ6 PVC tube as the drainage tube to prevent from blocking.
Please don’t install the condensation removal pump near any heat sources.
In case of malfunction, please don’t put the valuable goods or any electrical appliances under the
condensation removal pump.
4. Troubleshooting
Make sure the AC power is normal.
Checking the drainage tube is blocked or not.
Checking the dehumidifier drainage pipe is inserted into the condensation removal pump inlet or not.
In Case of malfunction of overflow:
CP10245
Specifications are subject to change without notice. Some values are approximate.
5. Installation Steps
Drainage pipe
(dehumidifier)
6 ~ 10cm
Condensation removal pump
Pump installation position
Setting the holder
Installation the outlet PVC drainage tube
Power cord connection
Warning:
The pump should have a constant incoming power supply
for 24hours a day.
Precaution:
In the event of power failure, please remove the dehumidifier
drainage pipe away from the pump. Redirect the drainage pipe
to an external bucket to collect remaining condensation water.
PVC Drainage Tube Installation Notice
Length
Height
Manuales populares de Bomba de agua de otras marcas
Sykes AmeriPumps
Sykes AmeriPumps GP100M Guía de solución de problemas
DUROMAX
DUROMAX XP WX Series Manual de usuario
BRINKMANN PUMPS
BRINKMANN PUMPS SBF550 Manual de usuario
Franklin Electric
Franklin Electric IPS Manual de usuario
Xylem
Xylem e-1532 Series Manual de usuario
Milton Roy
Milton Roy PRIMEROYAL Manual de usuario