Suntec Wellness Klimatronic Dynamic 6.0 plus Manual de usuario

Dynamic

☆

☆☆

☆Read and retain these instructions for future reference

Dynamic 6.0 plus

Dynamic 8.0 plus

SPECIFICATION

Model no. Dynamic 6.0 plus Dynamic 8.0 plus

Cooling capacity 6000 BTU/h 8000 BTU/h

Power/Ampere consumption for

cooling* 680 W / 3,0 A 800 W / 3.6 A

Air volume (max. speed) 260m

300m

Humidity removal capacity 20 l / day 24 l / day

Power supply 230V/50Hz/1phase

Recommended room size 10~18m

14~14m

Compressor rotary

Power supply 230V/50Hz/1phase

Refrigerant R 410 A

Refrigerant load* 340 g 380 g

Fan speed 2

Timer 1 ~ 8 hours

Working temperature, thermostat 18 ~ 32

Net Weight 20,5 kg 24,5 kg

Dimension 310 x 248 x 710 mm (WxDxH)

REMARK:

1. The data marked with '*' may vary for technical reasons: for greater

precision, please refer to the rating label placed at the back of the unit.

BEFORE USE

CAUTION !

Make sure the unit is connected to a earthed, power

supply

of the correct rating. (Please refer to the rating

label locating at the back side of the unit.)

Do not use this product for functions other than those

described in this instruction manual.

Always place the unit on a stable ground base.

(FIG.1)

The unit must always stand or be transported in a

vertical position.

Do not cover or obstruct the appliance’s inlet and

outlet Grilles. (FIG.2)

Do not use the product in a wet room, such as

bathroom or laundry room. (FIG.3)

Keep an air path of at least 50 cm from walls,

furniture and curtains. (FIG.4)

Do not sit or place objects on the unit.

Do not touch the unit with wet or damp hands or

when barefoot.

Do not let chemical substances come into contact

with the unit.

Do not use the product in the presence of

inflammable substance or vapour such as alcohol,

insecticides, petrol etc.

Never use the plug to start and stop the unit. Always

use the switch on the control panel.

Turn off the product when not in use.

Always remove the mains plug before carrying out

maintenance.

BEFORE USE

If the electrical socket is different from the plug, have a professionally qualified electrician replace the socket with

a suitable one. Avoid the use of adapter plugs, multiple sockets and / or extension leads. If their use is necessary,

ensure they conform to current safety regulation.

Do not pull the supply cable or place it near a source of heat: always unroll it completely to avoid dangerous

overheating.

If the supply cord is damaged, it must be replaced by the service agent or a similarly qualified person, in order to

avoid a hazard.

Never use the unit without the filter.

Especially, younger, elder, and disabled people are often not aware of the danger that might occur from the usage

of electrical appliances. Therefore, the product should never be used without supervision.

THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITY, IF THE ABOVE INSTRUCTIONS ARE

NOT FOLLOWED.

Energy Save

Please use the unit in the recommended room size.

Do not locate air conditioner where furniture or other objects can obstruct the air flow.

Keep blinds / curtains closed during the sunniest part of the day.

Close the fireplace damper, floor and / or wall registers, so cool air does not escape through the chimney or duct

work.

Keep the filters clean.

Set the unit to maximum cooling and high speed ventilation for the initial start up, then adjust the unit to a

comfortable setting.

Parts

Front Back

1. Display window

2. Control panel

3. Buttons

4. Air outlet

5. Carrying handle

6. Caster

Accessories

13. Outward adaptor - for insertion over hose

and into foam strip (or into hole in the

wall/window).

14. Exhaust hose

15. Foam strip - for filling the open window

space and with hole for connection to

exhaust hose.

16. Foam strip - for filling the open

window space

17. Round cap for filling the hole in

wall/window.

18. Drain tube for continuous

drainage

19. Active carbon filter

20. Remote control

7. Cord storage

8. Air filter

9. Air inlet

10. Exhaust air outlet

11. Air inlet

12. Water stopper/drainage point

INSTALLATION

Installation of the exhaust pipe

This unit is a PORTABLE AIR CONDITIONER. It can be moved from room to room, so the cooling can follow you

anywhere. The mounting is easy, beneath a window or wall. Please refer to either of the following steps:

1. Using the foam strips

•Connect the supplied foam strips with the exhaust pipe to let hot air flow to the outside. If necessary cut off the

extra part to fit the window.

•Feed exhaust hose through the foam strip and insert strip into window gaps as shown and slide window across so

that foam is held securely. This technique may also be used for sash windows. Note: Take care to maintain

protection against intruders.

2. Using the adaptor

•Cut a 130mm diameter hole in the wall or window.

•Feed exhaust hose through the window or wall and attach the threaded adaptor from the outside as shown.

•When not in use, plug the hole with the cover provided.

INSTALLATION

Mounting of the exhaust pipe

1. Use only the hose provided and clip

exhaust hose to the back of the air

conditioner. It is recommended that

you use the hose in the shortest

possible length.

2. Avoid kinks and bends in the exhaust

hose as this will cause expelled moist

air to build up causing the unit to

overheat and shut down.

WARNING!

The length of the exhaust pipe is specially

designed according to the specification of

this product. Do not replace or prolong it

with your own private hose as this could

cause the unit to mal-function.

Handling of electronic type

FIG. 8

FIG.9

FIG.10

Control panel

Fig. 12

1. ON/OFF (power) button

2. Timer

3. ‘Temperature up' button

4. Indicator for compressor

5. “Water Full” indicator

6. ‘Temperature down' button

7. Speed (ventilation)button

8. Mode (function) option button

9. Fan mode indicator

10. Cooling mode indicator

11. Automatic mode indicator

12. High ventilation indicator

13. Low ventilation indicator

14. Display window

15. Receiver for remote control

16. Timer operation indicator

Turning ON/OFF

1. Press ON/OFF button, the unit will start automatically. If the ambient temperature is

- higher than 23oC, the unit will work in cooling model.

- higher than 20oC but below or equal to 23oC, the unit will work in ventilation model.

- below 20oC, the unit will work in heating function (This is for cooling & heating models

only.)

2. Indicators of the functions in progress come on at the same time. *NOTE! The display

window shows the ambient room temperature from 0oC to 50oC

3. To turn the unit off, press ON/OFF button again.

Setting mode/function

Press MODE button to select required working mode: automatic, cooling or fan. The

indicator of your selected mode comes on.

Setting temperature

1. Press 'Temperature up' or 'Temperature down' button to regulate the temperature you

desired.

2. The display window will show the temperature you set as you press 'Temperature up' or

'Temperature down' button. Otherwise, it will always show the ambient temperature.

3. The pre-setting temperature of this machine is: 24oC for cooling

Setting ventilation speed

1. Press SPEED button to choose the ventilation speed you need, high or low. The indicator

of high or low ventilation will light on at the same time.

2. If the unit is in AUTO mode, it will choose the ventilation speed automatically according to

the ambient temperature (the related indicators will light on), at this time, the speed

switch is invalid.

Setting timer

1. Press TIMER button to set the operating hours you desired (1 to 12 hours, the timer

indicator will light on). When the set time has been reached, the machine will turn

off automatically. The display window will show the hour(s) you set as you press

TIMER button. If the timer button is not pressed, the unit will work continuously.

2. By the machine to work. For example, if you press the timer to '2', the unit will work

automatically after 2 hours.

All the above functions can also be performed with the supplied

remote control.

This remote control requires 2 pcs AAA batteries

to operate.

Regulating air flow direction

Turn the roller on the air vent in

horizontal way to control the air flow

direction.

NOTICE !

1. To prolong the compressor's life, after switch-off of the unit, please wait for 3

minutes (at least) before re-switch.

2. The cooling system will switch off if the ambient temperature is lower than the set one. The

ventilation, however, keeps working on the set level. If the ambient temperature rises above

the selected level, the cooling will return to work.

Installation of the carbon filter

1. Remove the filter frame from the unit.

2. Remove the active carbon filter from its plastic bag.

3. Insert the active carbon filter into the back of the unit.

4. Re-fit the filter frame inside the unit.

DRAINAGE

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Acondicionador de aire de Suntec Wellness

Suntec Wellness

Suntec Wellness Klimatronic Progress 9.0 plus Manual de usuario

Suntec Wellness

Suntec Wellness Klimatronic SUMMIT plus 2.7 Manual de usuario

Suntec Wellness

Suntec Wellness Klimatronic Motion 2.6 Eco R290 Manual de usuario

Suntec Wellness

Suntec Wellness KLIMATRONIC MOVE 7.000 Eco R290 Manual de usuario

Suntec Wellness

Suntec Wellness KLIMATRONIC EASY 2.7 Eco R290 Manual de usuario

Suntec Wellness

Suntec Wellness KLIMATRONIC Progress plus Series Manual de usuario

Suntec Wellness

Suntec Wellness KLIMATRONIC COOLFIXX 2.6 Eco R290 APP Manual de usuario

Suntec Wellness

Suntec Wellness Klimatronic COMFORT 7.0 Eco R290 Manual de usuario

Suntec Wellness

Suntec Wellness CLIMATRONIC IMPULS 2.6 Eco R290 APP Manual de usuario

Suntec Wellness

Suntec Wellness KLIMATRONIC Freeze 7.000 Eco R290 Manual de usuario

Suntec Wellness

Suntec Wellness Klimatronic CoolFixx 2.0 Eco R290 Manual de usuario

Suntec Wellness

Suntec Wellness Klimatronic FREEZE plus Manual de usuario

Suntec Wellness

Suntec Wellness KLIMATRONIC PROGRESS 7.000 Eco R290 Manual de usuario

Suntec Wellness

Suntec Wellness Klimatronic Transform 9.000 Eco R290 Manual de usuario

Suntec Wellness

Suntec Wellness KLIMATRONIC MULTIFREEZE 2.6 Eco R290 APP Manual de usuario

Suntec Wellness

Suntec Wellness Klimatronic Transform 7000 Manual de usuario

Suntec Wellness

Suntec Wellness Klimatronic Advance 2.9 MM plus Manual de usuario

Suntec Wellness

Suntec Wellness KLIMATRONIC COOLFIXX 16.000 Eco R290 APP Manual de usuario

Suntec Wellness

Suntec Wellness KLIMATRONIC IMPULS 2.6 Eco R290 Manual de usuario

Suntec Wellness

Suntec Wellness KLIMATRONIC COOLCOMFORT 7.000 Eco R290 Manual de usuario

Suntec Wellness

Suntec Wellness KLIMATRONIC RAPIDO 9.0 Eco R290 Manual de usuario

Suntec Wellness

Suntec Wellness KLIMATRONIC COOLMASTER 2.0 Eco R290 APP Manual de usuario

Suntec Wellness

Suntec Wellness KLIMATRONIC COOLFIXX 3.5 Eco R290 APP Manual de usuario

Suntec Wellness

Suntec Wellness Klimatronic ADVANCE 9.0 Eco Manual de usuario

Manuales populares de Acondicionador de aire de otras marcas

Spheros

Spheros CC 355 Manual de usuario

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manual de usuario

Panasonic

Panasonic CS-E12HKEW Manual de usuario

nedis

nedis ACMB1WT7 Manual de usuario

Samsung

Samsung AR KV Series Guía

Daikin

Daikin FCFV50A Manual de usuario

Fujitsu

Fujitsu Inverter ASBA30JFC Manual de usuario

Toshiba

Toshiba RAS-M10SMUV-E Manual de usuario

Daikin

Daikin FXLQ20MAVE Manual de usuario

Hitachi

Hitachi RAS-E24CAK Manual de usuario

CIAT

CIAT Magister 2 Series Guía

Bestron

Bestron AAC6000 Manual de usuario

Hisense

Hisense 7K Manual técnico

Frigidaire

Frigidaire FFRE0533S1E0 Manual de usuario

Samsung

Samsung AS09HM3N Manual de usuario

Frigidaire

Frigidaire CRA073PU11 Manual del propietario

Soleus Air

Soleus Air GB-PAC-08E4 Manual de usuario

McQuay

McQuay MCK020A Manual de usuario