SunSetter 900XT Manual de usuario

RETRACTABLE AWNINGS

For Technical Support visit usat www.sunsetter.com/ownerscorner orCall Toll Free

800-670-7071 • Fax 877-224-4944

Outer and Inner Arm With Rafter Set Replacement

900XT and 1000XT Awning

Tools Needed: 7/16” wrench, 7/16” socket and ratchet, 7/32” Allen wrench, & flat screwdriver.

Parts Supplied: Outer/Inner Arm (Left or Right), Rafter Set (Left or Right)

WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN PERSONAL INJURY!! PLEASE READ

THESE INSTRUCTIONS IN ITS ENTIRETY BEFORE ATTEMPTING TO COMPLETE THIS PROCESS.

PLEASE NOTE THAT LEFT AND RIGHT REFERENCES ARE AS YOU ARE FACING THE HOUSE.

1. Using the Hand Crank Wand, unroll the Awning until the Fabric is

completely extended. Do not lock the Rafters. Place a chair or box

under the Roller Bar for support. See Figure 1.

Note:If Arms and or Rafters on BOTH sides are to be replaced, more

than one chair or box should be used to evenly and safely support the

Roller Bar. See Figure 1.

Note:Take notice of the positioning of the Drive Unit and Crank Loop.

See Figure 5.

2. On the side needing replacement, remove the 1/4" nut and bolt that

secures the Rafter End to the Upper Bracket. See Figure 2

3. Carefully fold the Rafter set on top of the Arm.

4. Using a 7/32” Allen wrench, remove the Flat-head Cap Bolt that secures

the Arm and Rafter to the Roller Assembly. See Figure 3.

5. Separate the Roller from the end of the Rafter and Arm. See Figure 3.

Note: If you are replacing the Right Rafter Set, make sure that the

Drive Unit is oriented so that the Crank Loop is pointing towards the

HOUSE. See Figure 4.

6. Remove the old Rafter Set from the Awning and replace with the new

Rafter Set.

7. Unlatch the bottom of the Arm from the Wall Bracket on the house. See

Figure 4.

House

Roller Bar resting on one

or two chairs as needed

Figure 1

Figure

Roller Assembly

Arm

and

Rafter

Flat-head

Bolt

Figure 2

/4” nut and bolt

8. Transfer the extra Acorn Nut Stop from the old Inner Arm to the new

Inner Arm and tighten with a 7/16” wrench. See Figure 5.

9. Latch the bottom of the replacement Arm into the Wall Bracket on

the house. See Figure 4.

Note: If you are replacing the right hardware, make sure to orient the

Drive Unit so that the Crank Loop is pointing towards the HOUSE. See

Figures 6 and 6a.

10. Assemble the ends of the Rafter and Arm to the Roller and secure

with the Flat-head Cap Bolt. Tighten with a 7/32” Allen wrench. See

Figure 3.

11. Secure the Rafter End to the Upper Bracket with the 1/4" bolt and

nut, and tighten with a 7/16" wrench and 7/16" socket. See Figure 2.

12. Test the Awning for proper operation.

December 2, 2021 ©SunSetter Products, a Massachusetts Limited Partnership, 184 Charles Street, Malden, MA02148 INS053-InnerOuterArmWithRafter_Replacement

Figure

Figure 6a

Crank

Loop

Drive

Gear

Rafter

Arm Assembly

Figure 6

Otros manuales para 900XT

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de SunSetter

SunSetter

SunSetter EASYSHADE Instrucciones originales

SunSetter

SunSetter Vista Series Manual de usuario

SunSetter

SunSetter Platinum Plus Series Instrucciones originales

SunSetter

SunSetter OASIS Series Manual de usuario

SunSetter

SunSetter VISTA Guía de inicio rápido

SunSetter

SunSetter 900XT Manual de usuario

SunSetter

SunSetter Oasis Guía

SunSetter

SunSetter Oasis Guía

SunSetter

SunSetter 900XT Manual de usuario

SunSetter

SunSetter Oasis Manual de uso y cuidado

SunSetter

SunSetter EASYSHADE Manual de uso y cuidado

SunSetter

SunSetter PRO Instrucciones de funcionamiento y seguridad

SunSetter

SunSetter Motorized Series Instrucciones originales

SunSetter

SunSetter 900XT Manual de uso y cuidado

SunSetter

SunSetter Oasis Guía

SunSetter

SunSetter Oasis Guía

SunSetter

SunSetter Platinum Plus Guía

SunSetter

SunSetter Gaviota Guía de inicio rápido

SunSetter

SunSetter Motorized PRO Guía

SunSetter

SunSetter VISTA Instrucciones originales

SunSetter

SunSetter Oasis Guía

SunSetter

SunSetter Wireless Wind Sensor Manual de usuario

SunSetter

SunSetter EASYSHADE Manual de uso y cuidado

SunSetter

SunSetter Oasis Guía

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario