Sunpin PD101 Manual de usuario


1
Contents
Wichtige Sicherheitsanweisungen
Fehlerbehebung/Garantie
Übersicht über das Gerät
Verwenden Sie Ihren DVD-Player
Was ist in der Box
Anpassungseinstellungen
Produkt-Information
15
17
19
24
24
27
16
3
4
6
11
11
14
2
Important safety instructions
Trouble shooting/warranty
Overview over the device
Use your DVD player
What's in the box
Adjust the settings
Product’s information

Thank you for purchasing SunPin PD101 Portable DVD Player. This is the Quick Start Guide, which provides
you with basic operations’ instructions. Please read it carefully before using the product. We do provide 12
months warranty. If you have any problems or suggestions, please feel free to contact us by amazon
message, or send an email to our ocial E-mailbox. sunpin oers 24/7 online support service
Ocial E-mail: service@sunpinpro.com
Important safety instructions
1. Read all instructions before start using the unit.
2. Use this unit only for its intended use as described in the manual.
3. The temperature of accessible surface may increase when the unit is operating.
4. If smoke is emitted, switch o and unplug the unit immediately.
5. Ventilation slots in the cabinet are provided for ventilation to ensure reliable operation of the product to
protect it from overheating, the slots should not be blocked by placing the product on a bed, sofa, rug,
or any other similar surface.
6. Never attempt to disassemble the unit by yourself, it is very dangerous and may cause an electric shock
and/or harm from exposure to the laser beam. Please refer all servicing and maintenance to an authorized
service center.
Please read through this manual before operating the unit. Please retain this manual for further use.
2

Trouble shooting/ warranty
SunPin oers 12 months warranty card (included in the box) and 24/7 customer support.
ACTIVATE YOUR 12-MONTH WARRANTY. Register within 7 days after receiving your new product by
visiting this link: www.sunpinpro.com/warranty
If you face any trouble operating the DVD player or if there is any broken item, please don’t hesitate to
contact us and we will guide you through the process of fixing your problem.
E-mail: [email protected]
3

2
1
4
3
6
5
8
10
11
12
7
13
9
Overview over the device
DVD picture
1. DVD / USB / CARD SELECT KEY
2. TFT SCREEN ON / OFF
3. SETUP
4. MENU
5. PLAY / PAUSE
6. STOP
7. VLOUME DOWN
8. VOLUME UP
9. FAST REWIND / LEFT
10. PREVIOUS / UP
11. FAST FOWRWARD / RIGHT
12. ENTER / OK KEY
13. NEXT / DOWN
14. USB PORT
15. SD / MMC CARD SLOT
16. 3.5 mm HEADPHONE JACK (1)
17. AV OUTPUT JACK
18. 3.5 mm HEADPHONE JACK (2)
19. ON / OFF SWITCH
20. DC IN 9~12V INPUT
21. REMOTE SENSOR WINDOW
4
14
21
15 16 17 18 19 20

DISPLAY
SLOW
SUBTITLE
RETURN
ZOOM
REPEAT
A-B
MENU
SETUP
1
7
10
12
14
15
3
6
9
16
19
11
4
2
8
17
18
5
13
Remote picture
1. MAIN POWER
2. USB/CARD
3. MUTE
4. VOLUME -/+
5. ENTER
6. DIRECTION BUTTONS
7. SETUP
8. RETURN
9. MENU
10. PLAY/PAUSE
11. FAST FORWARD / FAST REWIND
12. STOP
13. PREVIOUS/ NEXT
14. A-B LOOP REPEAT
15. ZOOM IN/OUT
16. SLOW
17. TRACK REPEAT
18. SUBTITLE
19. DISPLAY
5

Use your DVD player
Turn on/o the player
Slide the Power switch on the right side of the player to the "ON" position to turn on the player.
Slide the Power switch on the right side of the player to the "OFF" position to completely turn o the player.
Note: If you won’t use the player for a long period of time, slide the Power switch to the "OFF" position and
unplug the power source.
Choosing the Input Source (DVD/USB/SD)
Click the (USB/CARD) on the remote control or the unit to switch between DVD or USB or SD input sources,
if the corresponding device is inserted,
When you insert a DVD or USB ash drive, or SD card while the DVD Player is not connected to any
multimedia devices, the input source would be selected automatically
Playing Discs
1. Slide the Power switch on the player to "ON" position to turn on the player.
2. Open the disc cover and insert a playable DVD or CD disc, make sure the label side is facing up, and then
close disc cover.
3. The player will scan the disc, and then playback will start automatically. If a disc menu appears on the
screen, you can choose your desired track or video.
5. During the playback, press the STOP button to stop playback.
6. Sliding the Power Switch on the player to "OFF" position will turn o the player.
6

7. Press the MENU button on the remote control to activate or deactivate the PBC function, if the disk
supports PBC function.
PBC playback allows you to play Video CDs(VCD version 2.0 only)interactively.
8. Press the MUTE button on the remote control to turn on or o the sound.
9. Press the Display button on the remote control to select the playtime.
10. Press the REPEAT/PROG on the remote control button to re-setup the playing order.
Volume Control
Press the VOL+/-button on the player or the remote control to increase or decrease the volume level. To
switch o the volume temporarily press the MUTE button on the remote control. Playback will continue
without sound. Press it again or press the volume button to activate the sound.
Repeat A-B(DVD / VCD / CD / MP3)Playback
Using this feature to repeat the playback of a specic section of a track/chapter (loop). Press the Repeat
A-B button on the remote to set the desired start point of the section to be repeated.
Press the Repeat A-B button on the remote again to set the desired endpoint of the section to be repeated.
The section "A-B" will now be played repeatedly as a loop.
Press the Repeat A-B button a third time to cancel the repeat A-B feature and resume normal playback.
Selecting Subtitle Languages(DVD)
While playing a DVD disc that has been mastered with multiple subtitles, press the Subtitle button
repeatedly to select the desired language of the viewable subtitle.
7

8
Information Display
During playback, press the DISPLAY button repeatedly to show the disc playback information on the screen
(video format, time, title and chapter, etc.)
Note: Depending on the type of disc(DVD, VCD, CD or Data discs), dierent information will be shown on
display.
Connect to USB
You can play or view the supported song les, such as the MP3/WMA, Video les such as AVI and JPEG for
photos. Insert the USB device into the USB port on the right side of your portable DVD player. The portable
DVD player supports USB devices up to 32 GB.
(Note: Not all USB devices can be read well, which may result in playback issues.)
All functions are the same as playing a disc.
Note: The USB IN port is compatible with ash drives. Some MP3 players using proprietary software may
not be compatible.
Connect SD/MMC Memory Card
1. insert an SD or MMC card into the SD/MMC Memory Slot.
2. Switch unit to Card Mode by pressing the USB/CARD button.
3. Use the Directional buttons to select videos or image. Press the Enter button to play.
4. The portable DVD player supports Memory Cards up to 32 GB.
Note: Please be sure you don't insert the card incorrectly or it may become damaged. Always stop the
playback or change to another mode before removing the USB/memory card.
Tabla de contenidos
Idiomas:
Otros manuales de Reproductor de DVD portátil de Sunpin



















