Sun Microsystems Sun Netra CP3250 Manual de usuario

Sun Microsystems, Inc.

www.sun.com

Submit comments about this document at: http://www.sun.com/hwdocs/feedback

Sun Netra™CP3250

Blade Server User’s Guide

Part No. 820-5195-11

April 2009, Revision 01

Please

Recycle

This distribution may include materials developed by third parties.

Parts of the product may be derived from Berkeley BSD systems, licensed from the University of California. UNIX is a registered trademark in

the U.S. and in other countries, exclusively licensed through X/Open Company, Ltd.

Sun, Sun Microsystems, the Sun logo, Netra, Sun Ray, the Netra logo and the Solaris logo are trademarks or registered trademarks of Sun

Microsystems, Inc., or its subsidiaries, in the U.S. and other countries.

All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. in the U.S. and other

countries. Products bearing SPARC trademarks are based upon architecture developed by Sun Microsystems, Inc.

Use of any spare or replacement CPUs is limited to repair or one-for-one replacement of CPUs in products exported in compliance with U.S.

export laws. Use of CPUs as product upgrades unless authorized by the U.S. Government is strictly prohibited.

DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,

INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT,

ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.

Cette distribution peut comprendre des composants développés par des tierces parties.

Des parties de ce produit pourront être dérivées des systèmes Berkeley BSD licenciés par l’Université de Californie. UNIX est une marque

déposée aux Etats-Unis et dans d’autres pays et licenciée exclusivement par X/Open Company, Ltd.

Sun, Sun Microsystems, le logo Sun, Netra, Sun Ray, le logo Netra et le logo Solaris sont des marques de fabrique ou des marques déposées de

Sun Microsystems, Inc., ou ses ﬁliales, aux Etats-Unis et dans d’autres pays.

Toutes les marques SPARC sont utilisées sous licence et sont des marques de fabrique ou des marques déposées de SPARC International, Inc.

aux Etats-Unis et dans d’autres pays. Les produits portant les marques SPARC sont basés sur une architecture développée par Sun

Microsystems, Inc.

L’utilisation de pieces detachees ou d’unites centrales de remplacement est limitee aux reparations ou a l’echange standard d’unites centrales

pour les produits exportes, conformement a la legislation americaine en matiere d’exportation. Sauf autorisation par les autorites des Etats-

Unis, l’utilisation d’unites centrales pour proceder a des mises a jour de produits est rigoureusement interdite.

LA DOCUMENTATION EST FOURNIE "EN L’ETAT" ET TOUTES AUTRES CONDITIONS, DECLARATIONS ET GARANTIES EXPRESSES

OU TACITES SONT FORMELLEMENT EXCLUES, DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE, Y COMPRIS NOTAMMENT

TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A L’APTITUDE A UNE UTILISATION PARTICULIERE OU A

L’ABSENCE DE CONTREFACON.

iii

Contents

Preface xiii

1. Overview 1–1

1.1 Overview 1–2

1.2 Features 1–2

1.3 Physical Description 1–4

1.3.1 Front Panel Components 1–4

1.3.2 Blade Server Diagram 1–6

1.4 System Configurations 1–7

1.4.1 AMC 1–8

1.4.2 Advanced Rear Transition Module 1–8

1.5 Hot-Swap Support 1–11

1.6 System Components 1–11

1.6.1 Required Hardware Components 1–11

1.6.2 Optional Hardware Components 1–12

1.6.3 Software Components 1–12

1.7 Technical Support and Warranty 1–13

1.7.1 Locating the Part Number and Serial Number Information 1–13

1.7.2 Viewing the Electronic Blade Server ID Information 1–14

iv Sun Netra CP3250 Blade Server User’s Guide • April 2009

2. Hardware Installation and Service 2–1

2.1 Safety and Tool Requirements 2–2

2.1.1 Equipment and Operator Safety 2–2

2.1.2 Materials and Tools Required 2–3

2.2 Installing the Blade Server 2–4

2.2.1 Preparing for the Installation 2–4

2.2.1.1 Check Power, Thermal, Environmental, and Space

Requirements 2–4

2.2.1.2 Local Network IP Addresses and Host Names

Worksheet 2–5

2.2.1.3 Installation Procedure Summary 2–6

2.2.2 Configuring the Hardware 2–6

2.2.2.1 Verify Chassis Fan Tray Upgrade 2–6

2.2.2.2 Installing Optional Components 2–7

2.2.2.3 Configuring the Advanced Rear Transition Module

(ARTM) 2–7

2.2.3 Installing the Netra CP3250 Blade Server in an ATCA Shelf 2–8

2.2.3.1 Installing an Advanced Rear Transition Module

(ARTM) 2–8

2.2.3.2 Installing the Blade Server Into the Shelf 2–11

2.2.4 Connecting External I/O Cables 2–13

2.2.4.1 Connecting Cables to a System Console Running the

Solaris OS 2–13

2.2.4.2 Connecting Cables to the System Console Not Running

the Solaris OS 2–15

2.2.4.3 Netinstall Boot Device Map 2–15

2.3 Service Procedures 2–17

2.3.1 Hot-Swapping the Netra CP3250 Blade Server 2–17

2.3.2 Powering Off the Netra CP3250 Blade Server 2–17

2.3.3 Removing the Netra CP3250 Blade Server 2–18

2.3.4 Powering On the System 2–18

Contents v

2.3.5 Automatic Power-Off Events 2–18

2.3.6 Servicing DIMMs 2–19

2.3.6.1 DIMM Requirements 2–19

2.3.6.2 Installing a DDR2 DIMM 2–21

2.3.6.3 Removing a DDR2 DIMM 2–23

2.3.7 Installing the Optional Compact Flash Card 2–24

2.3.8 Installing Optional AMC 2–27

2.3.9 Adding or Replacing the Battery 2–30

2.3.10 Changing Jumper Settings 2–31

2.3.10.1 Clearing the CMOS Setting Using Jumper 2 2–31

2.3.10.2 Changing the OOS LED Color Using Jumper 13 2–32

2.3.11 Checking DIP Switch Settings 2–33

2.3.12 Resetting the Netra CP3250 Blade Server 2–34

3. Hardware Architecture 3–1

3.1 Block Diagram 3–2

3.2 Intel Processors 3–3

3.3 Intel San Clemente MCH 3–3

3.4 Memory 3–4

3.5 Networking and I/O 3–5

3.5.1 ICH9 I/O Controller Hub 3–5

3.5.2 PCI Express Bus 3–5

3.5.3 LPC Bus Interface 3–6

3.5.4 Redundant BIOS 3–6

3.5.5 Trusted Platform Module (TPM) 3–7

3.5.6 IPMC 3–7

3.5.7 RS-232 Serial Ports 3–7

3.5.8 Broadcom 5715C Gigabit Ethernet 3–8

vi Sun Netra CP3250 Blade Server User’s Guide • April 2009

3.5.9 Sun Dual 10-Gbit Ethernet/Quad 1-Gbit RGMII Network Interface

Chip 3–8

3.6 I/O Components 3–8

3.6.1 AMC Slot 3–8

3.6.2 EIDE/ATA for Compact Flash 3–9

3.6.3 SAS/SATA 3–9

4. Software Configuration 4–1

4.1 Operating Systems 4–2

4.2 Software Updates 4–2

4.3 SunVTS Software 4–3

4.4 Configuring Sun Netra CP3250 blade server For 1 GbE or 10 GbE

Switches 4–4

5. Configuring and Using BIOS Firmware 5–1

5.1 About BIOS Settings 5–2

5.1.1 Navigating BIOS Screens 5–2

5.1.2 BIOS Option ROMs 5–2

5.1.3 Description of the BIOS Screens 5–3

5.2 Changing the Configuration of a BIOS Menu Item 5–3

5.3 Setting the Boot Device Using BIOS Setup Screens 5–4

5.4 Setting Supervisor and User Passwords 5–5

5.5 Resetting the System Time and System Date 5–6

5.6 Updating the BIOS 5–6

5.7 Secondary BIOS Image 5–7

5.8 Perform a Live Firmware Upgrade 5–8

5.9 Power-On Self-Test 5–8

5.10 Changing POST Options 5–9

A. BIOS Screens A–1

Contents vii

B. Physical Characteristics B–1

B.1 Form Factor B–2

B.2 Power and Thermal Metrics B–2

B.3 Connectors and Pinouts B–2

B.3.1 Front Panel Connectors B–2

B.3.1.1 Ethernet Port B–3

B.3.1.2 USB Ports B–4

B.3.1.3 Serial Port B–5

B.3.2 AMC Connector B–5

B.3.3 Power Connector (Zone 1) B–6

B.3.4 Data Transport Connector (Zone 2) B–8

B.3.5 Advanced Rear Transition Module (ARTM) Connector (Zone 3)

B–9

B.3.5.1 Zone 3 (J30) Connector Pin Assignments B–10

B.3.5.2 Zone 3 (J31) Connector PIN Assignments B–11

B.3.5.3 Zone 3 (J32) Connector PIN Assignments B–12

B.3.5.4 Zone 3 (J33) Connector PIN Assignments B–13

B.3.5.5 Zone 3 Signal Descriptions B–14

C. ShMM CLI and Commands C–1

C.1 Shelf Manager Command-Line Interface C–2

C.2 Shelf Manager CLI Commands C–3

Index Index–1

viii Sun Netra CP3250 Blade Server User’s Guide • April 2009

Figures

FIGURE 1-1 Netra CP3250 Blade Server (Front View) 1–4

FIGURE 1-2 Netra CP3250 Blade Server (Component Side View) 1–6

FIGURE 1-3 Netra CP3250 Blade Server in Shelf Enclosure 1–7

FIGURE 1-4 Netra CP3250 Blade Server, Backplane, and Relationship to ARTM 1–9

FIGURE 1-5 Netra CP3250 Blade Server Barcode Labeling 1–14

FIGURE 2-1 Installing a Netra CP32x0 ARTM 2–9

FIGURE 2-2 Injector/Ejector Latch and Locking Screw on the ARTM 2–10

FIGURE 2-3 Engaging the Netra CP3250 Blade Server Latch 2–12

FIGURE 2-4 Serial Port on the Netra CP3250 Blade Server 2–14

FIGURE 2-5 Locating DIMM Slots 2–20

FIGURE 2-6 Installing a DIMM 2–22

FIGURE 2-7 Removing a DIMM 2–24

FIGURE 2-8 Opening the Door to Access Compact Flash 2–25

FIGURE 2-9 Compact Flash Location 2–26

FIGURE 2-10 Removing an AMC Filler Panel 2–28

FIGURE 2-11 Installing an AMC 2–29

FIGURE 2-12 Jumper 2 in the Default Run Position 2–31

FIGURE 2-13 SW1 Default DIP Switch Settings 2–33

FIGURE 2-14 SW4 Default DIP Switch Settings 2–33

FIGURE 2-15 SW5 Default DIP Switch Settings 2–34

xSun Netra CP3250 Blade Server User’s Guide • April 2009

FIGURE 2-16 Netra CP3250 Blade Server Front Panel 2–35

FIGURE A-1 BIOS Main Menu A–2

FIGURE A-2 Advanced Configuration Menu A–3

FIGURE A-3 CPU Configuration Menu A–4

FIGURE A-4 IDE Configuration Menu A–5

FIGURE A-5 USB Configuration Menu A–6

FIGURE A-6 Event Log Control Menu A–7

FIGURE A-7 IPMI 2.0 Configuration Menu A–8

FIGURE A-8 Remote Access Configuration Menu A–9

FIGURE A-9 PCI Option ROM Configuration Menu A–10

FIGURE A-10 Trusted Computing Menu A–11

FIGURE A-11 Boot Settings Menu A–12

FIGURE A-12 Boot Device Priority Configuration Menu A–13

FIGURE A-13 Security Settings Menu A–14

FIGURE A-14 Exit Menu A–15

FIGURE B-1 Ethernet RJ-45 Connector B–3

FIGURE B-2 Front Panel USB Connector B–4

FIGURE B-3 Front Panel Serial RJ-45 Connector B–5

FIGURE B-4 Power Distribution Connector (Zone 1) P10 B–6

FIGURE B-5 Zone 2 Connector B–8

FIGURE B-6 Zone 3 Connector B–10

Tabla de contenidos

Otros manuales de Servidor de Sun Microsystems

Sun Microsystems

Sun Microsystems Sun Enterprise 6500 Manual de usuario

Sun Microsystems

Sun Microsystems Sun Fire V890 Manual de usuario

Sun Microsystems

Sun Microsystems Netra 440 Instrucciones de instalación y funcionamiento

Sun Microsystems

Sun Microsystems AC200 Manual de usuario

Sun Microsystems

Sun Microsystems Netra st D130 Manual

Sun Microsystems

Sun Microsystems Sun Fire X4150 Server Manual de usuario

Sun Microsystems

Sun Microsystems Sun Fire T1000 Manual de usuario

Sun Microsystems

Sun Microsystems Enterprise Expansion Cabinet Optional Power... Manual de usuario

Sun Microsystems

Sun Microsystems Sun StorEdge Switch-8 Manual de instrucciones de instalación

Sun Microsystems

Sun Microsystems SUN FIRE X4640 Manual de usuario

Sun Microsystems

Sun Microsystems Ultra Enterprise 450 Manual de servicio

Sun Microsystems

Sun Microsystems Netra T1 AC200 Manual de usuario

Sun Microsystems

Sun Microsystems Netra t1 100 Manual de instrucciones

Sun Microsystems

Sun Microsystems Sun Enterprise 10000 Manual de usuario

Sun Microsystems

Sun Microsystems Netra ct Manual de usuario

Sun Microsystems

Sun Microsystems Fire 880 Manual de instrucciones

Sun Microsystems

Sun Microsystems Sun Fire X4150 Server Manual de instrucciones

Sun Microsystems

Sun Microsystems Blade X6450 Manual de usuario

Sun Microsystems

Sun Microsystems Sun Fire X4250 Manual de instalación y funcionamiento

Sun Microsystems

Sun Microsystems iPlanet Web Server Manual de usuario

Sun Microsystems

Sun Microsystems Netra t 1125 Manual de usuario

Sun Microsystems

Sun Microsystems Sun Fire X4450 Manual de usuario

Sun Microsystems

Sun Microsystems Netra T1 AC200 Manual de servicio

Sun Microsystems

Sun Microsystems Sun Fire V60 Series Cómo utilizar

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario