Sun Microsystems Sun Fire X4170 Manual de usuario

This guide describes the minimum steps you must perform to power on and boot your server for the first time.

Detailed installation information can be found in the Sun Fire X4170, X4270, and X4275 Servers Installation Guide,

which is available at the Sun documentation web sites for the individual servers. Refer to the section

“Documentation for This Product” at the end of this document for a list of documentation for your system.

Contents

The Sun FireTM X4170, X4270, and X4275 Servers are shipped with safety documentation and the components

that you ordered for your configuration. Optional components or rack installation equipment might be packaged

and shipped separately.

Documentation and Media Kit

The Documentation and Media Kit is an orderable option for your system. It contains installation

documentation, the Tools and Drivers CD/DVD, Sun Installation Assistant CD/DVD, and the SunVTS CD/

DVD. You can order the Documentation and Media Kit at any time, using the following marketing part number:

X5900A.

You also can download the documentation and software that are included in the Documentation and Media Kit

from these sites:

■For documentation:

■http://docs.sun.com/app/docs/prod/sf.x4170

■http://docs.sun.com/app/docs/prod/sf.x4270

■http://docs.sun.com/app/docs/prod/sf.x4275

■For software:

■http://www.sun.com/servers/x64/x4170/downloads.jsp

■http://www.sun.com/servers/x64/x4270/downloads.jsp

■http://www.sun.com/servers/x64/x4275/downloads.jsp

Sun Fire™X4170, X4270 and

X4275 Servers

Getting Started Guide

Safety and Compliance Information

Before performing an installation, refer to the following documents for safety information regarding the Sun Fire

X4170, X4270, and X4275 Servers:

■Important Safety Information for Sun Hardware Systems – Printed document included in the ship kit.

■Sun Fire X4170, X4270, and X4275 Servers Safety and Compliance Guide – Online at Sun documentation site.

▼Install Optional Components

Before installing the server into the rack, you must first install any optional components that you ordered with

the server, such as DIMMs, PCIe cards, and so on. Refer to the Sun Fire X4170, X4270, and X4275 Servers

Installation Guide for the instructions on installing optional components.

▼Mount the System in a Rack

For rackmounting instructions, refer to the documents included with the rail kit, the service label on the server,

and to the Sun Fire X4170, X4270, and X4275 Servers Installation Guide.

▼Connect the Cables and Apply Standby Power to the Server

1. Connect a serial cable between the server’s SER MGT port (FIGURE 1) and a serial terminal device.

This connection provides your initial communication with the SP. The device must be set up to communicate

using 9600 baud, 8 bit, no parity, 1 stop bit. A null modem configuration is needed, meaning the transmit and

receive signals are reversed (crossed over) for DTE to DTE communications. You can use the supplied RJ-45

crossover adapter with a standard RJ-45 cable to achieve the null modem configuration. (FIGURE 1 shows the

Sun Fire X4170 Server. The locations of the back panel connectors and ports are the same on the Sun Fire

X4270 and X4275 Servers.)

FIGURE 1 Back Panel of Server (Server Connections)

2. (Optional) Connect an Ethernet cable between the server’s NET MGT port and the network to which

future connections to the SP will be made.

After the initial configuration of the system using the SER MGT port, communication with the SP is usually

performed through this Ethernet interface.

3. Connect an Ethernet cable between one of the server’s NET ports (NET 0, 1, 2, or 3) and the network to

which the server will communicate.

Figure Legend

1AC power connectors 4Gigabit Ethernet ports NET 0, 1, 2, 3 (Intel)

2Serial management (SER MGT)/RJ-45 serial port 5USB 2.0 ports (0, 1)

3Service processor network management (NET MGT) port 6HD15 video connector (analog VGA)

4. Connect the power cords to AC power connectors and, to enhance redundancy, to separate power sources.

When power is applied, the SP initializes and the Power/OK LED flashes (FIGURE 2 and FIGURE 3). After a

few minutes, the SP Login prompt appears on the terminal device. Note that the server is not initialized or

powered on yet. For more information on connectivity options, refer to the Sun Fire X4170, X4270, and X4275

Servers Installation Guide.

At this point, standby power is supplied only to the service processor and power supply fans. Do not apply

main power to the rest of the server until you are ready to install a platform operating system. In standby

power mode, the Power/OK LED on the server’s front panel flashes. (FIGURE 2 shows the Sun Fire X4170

Server. Sun Fire X4270 Server front panel controls are at the same location as Sun Fire X4170 controls.

FIGURE 3 shows the Sun Fire X4275 Server.)

FIGURE 2 Sun Fire X4170 Server Front Panel Controls

FIGURE 3 Sun Fire X4275 Server Front Panel Controls

▼Connect to ILOM and Conﬁgure an IP Address

There are three methods for connecting to the Integrated Lights Out Manager (ILOM) SP to perform initial setup

and configure an IP address:

■Connect to ILOM using a serial connection

■Connect to ILOM using an Ethernet connection (DHCP)

■Connect to ILOM using an Ethernet connection (static IP address)

Figure Legend

1Power/OK LED 2Power Button

Figure Legend

1Power Button 2Power/OK LED

1 2

For information about managing Sun systems using ILOM, go to: http://www.sun.com/

systemmanagement/index.jsp

Refer to the Sun Fire X4170, X4270, and X4275 Servers Installation Guide and the Sun Integrated Lights Out Manager

2.0 User’s Guide or the Sun Integrated Lights Out Manager (ILOM) 3.0 Documentation Collection for instructions on

using ILOM to configure and manage the server.

▼Apply Main Power to the Server

Use this procedure to apply main power to the server.

Caution – Do not operate the server without all fans, component heatsinks, air baffles, and the cover

installed. Severe damage to server components can occur if operated without adequate cooling

mechanisms.

1. Verify that the power cord has been connected (FIGURE 1) and that standby power is on.

2. Use a non-metallic stylus to press and release the recessed Power button on the front panel.

When main power is applied to the full server, the Power/OK LED lights and remains on.

Note – The first time the server powers on, the power-on self-test (POST) can take up to 1 minute to complete.

3. Continue with initial software setup tasks, as described in the Sun Fire X4170, X4270, and X4275 Servers

Installation Guide.

▼Update Firmware

Sun highly recommends that you use the Sun Installation Assistant (SIA) to easily install updated firmware, a

supported Linux or Windows operating system, and the latest hardware drivers. SIA is available in the

Documentation and Media Kit and online at http://www.sun.com/systemmanagement/sia.jsp. Also refer

to the Sun Installation Assistant for Windows and Linux User’s Guide (820-3357) at http://docs.sun.com/app/

docs/prod/install.x64svr#hic.

To update ILOM firmware and system BIOS without using SIA, refer to the Sun Integrated Lights Out Manager 2.0

User’s Guide at http://docs.sun.com/app/docs/prod/int.lights.mgr20#hic or the Sun Integrated

Lights Out Manager (ILOM) 3.0 Documentation Collection at http://docs.sun.com/app/docs/prod/

int.lights.mgr30#hic.

All firmware and drivers are located on the Tools and Drivers CD/DVD, which is part of the Documentation

and Media Kit. You also can download the software on the Tools and Drivers CD/DVD from the Sun software

download sites (see links in the following table).

▼Set Up the Platform Operating System and Driver Software

After configuring the ILOM SP with network settings, you can configure a preinstalled or supported operating

system (OS).

The following table provides additional references for installing an operating system, system device drivers,

firmware, and patches.

▼Register the System

1. Locate the serial number for your system on the EZ label or on the customer information sheet that came

with the system.

2. Go to the following web site to register your system:

http://www.sun.com/service/warranty/index.xml#reg

Documentation for This Product

The following table lists the documentation and the approximate order of the tasks that you might perform

when installing a new system. The most up-to-date versions of the documents are at the Sun web sites:

■http://docs.sun.com/app/docs/prod/sf.x4170

■http://docs.sun.com/app/docs/prod/sf.x4270

■http://docs.sun.com/app/docs/prod/sf.x4275

Operating

system: Read this document:

For installation information,

go to:

For latest software

releases (tools, drivers,

firmware, SIA), go to:

For patch information,

go to:

Preinstalled

Solaris OS

Sun Fire X4170, X4270,

and X4275 Servers

Installation Guide

http://www.sun.com/

software/

preinstall/

• http://

www.sun.com/

servers/x64/

x4170/

downloads.jsp

• http://

www.sun.com/

servers/x64/

x4270/

downloads.jsp

• http://

www.sun.com/

servers/x64/

x4275/

downloads.jsp

•Windows or Linux:

Use SIA for

automatic

firmware update

and driver

installation

• See the Sun Fire

X4170, X4270, and

X4275 Servers Product

Notes

• http://

sunsolve.sun.com

Solaris OS Sun Fire X4170, X4270,

and X4275 Servers Linux,

VMware, and Solaris OS

Installation Guide

http://www.sun.com/

software/solaris

OpenSolaris

VMware

(ESX)

http://

www.vmware.com/

http://

www.vmware.com/

download/

Windows • Windows or Linux:

Sun Installation

Assistant for Windows

and Linux User’s Guide

•Windows: Sun Fire

X4170, X4270, and

X4275 Servers

Windows OS

Installation Guide

•Linux:

Sun Fire X4170,

X4270, and X4275

Servers Linux,

VMware, and Solaris

OS Installation Guide

• http://

www.sun.com/

systemmanagement/

sia.jsp

• http://

www.sun.com/

servers/x64/

x4170/os.jsp

• http://

www.sun.com/

servers/x64/

x4270/os.jsp

• http://

www.sun.com/

servers/x64/

x4275/os.jsp

http://

update.microsoft.

com/

Linux • Redhat: https://

www.redhat.com/

apps/download/

• SUSE: http://

download.novell.

com/index.jsp

Part No. 820-5833-11, Rev. A

June 2009

Sun Microsystems, Inc.

www.sun.com

Sun Contact Information

Topic URL

Technical support http://www.sun.com/service/contacting

Submitting comments on this document http://www.sun.com/hwdocs/feedback

Please include the title and part number of your document with your feedback:

Sun Fire X4170, X4270, and X4275 Servers Getting Started Guide (820-5833-11)

Driver and firmware updates See “Set Up the Platform Operating System and Driver Software.”

For translated versions of the documentation, go to the http://docs.sun.com web site, then select your

language to access the documentation set in your language.

Task Document Type Part Number

Review safety information. Safety and Compliance Guide 820-5832

Important Safety Information for Sun Hardware 816-7190

Review known issues and workarounds. Product Notes 820-5831

Install the server into rack. Set up and configure

hardware. Configure the preinstalled Solaris OS.

Installation Guide 820-5827

(Optional) Install and configure the Solaris,

Linux, or Windows OS.

Linux, VMware, and Solaris OS Installation Guide 820-5828

Windows OS Installation Guide 820-5829

Manage server accounts, monitor alerts, set

remote access and redirection, and view

component status and event logs.

Sun ILOM 2.0 Documentation: http://docs.sun.com/

app/docs/prod/int.lights.mgr20#hic

multiple

documents

Sun ILOM 3.0 Documentation: http://docs.sun.com/

app/docs/prod/int.lights.mgr30#hic

multiple

documents

Set BIOS and RAID settings. Service

components.

Service Manual 820-5830

Otros manuales para Sun Fire X4170

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Servidor de Sun Microsystems

Sun Microsystems

Sun Microsystems Sun Fire X4450 Manual de usuario

Sun Microsystems

Sun Microsystems Sun Blade X6440 s Manual de servicio

Sun Microsystems

Sun Microsystems Sun Fire V1280 Manual de usuario

Sun Microsystems

Sun Microsystems Sun Java Content Delivery Server 5.0 Manual de instrucciones

Sun Microsystems

Sun Microsystems Sun Fire T1000 Manual de instrucciones

Sun Microsystems

Sun Microsystems Sun Fire V445 Manual de instrucciones

Sun Microsystems

Sun Microsystems Fire High-End Server Systems Manual de programación

Sun Microsystems

Sun Microsystems Sun Fire X4150 Server Manual de usuario

Sun Microsystems

Sun Microsystems SUN FIRE X4640 Manual de usuario

Sun Microsystems

Sun Microsystems Blade X4-2B Manual de usuario

Sun Microsystems

Sun Microsystems Fire X4800 Manual de usuario

Sun Microsystems

Sun Microsystems Fire 6800 Manual de instrucciones

Sun Microsystems

Sun Microsystems Sun GlassFish Enterprise Server 2.1 Manual de instrucciones

Sun Microsystems

Sun Microsystems Sun Java SystemDirectory Server Manual de usuario

Sun Microsystems

Sun Microsystems Fire V440 2-Post Manual de usuario

Sun Microsystems

Sun Microsystems Sun Fire V890 Manual de instrucciones de instalación

Sun Microsystems

Sun Microsystems Sun Blade X6270 Manual de usuario

Sun Microsystems

Sun Microsystems Sun Fire V890 Manual de usuario

Sun Microsystems

Sun Microsystems Sun Ultra 450 Manual de usuario

Sun Microsystems

Sun Microsystems Sun Fire E25K Manual de usuario

Sun Microsystems

Sun Microsystems Fire 880 Manual de instrucciones

Sun Microsystems

Sun Microsystems Sun SPARC Enterprise M8000 Manual de servicio

Sun Microsystems

Sun Microsystems Fire 3800 Manual de usuario

Sun Microsystems

Sun Microsystems SUN FIRE X4500 Manual de instrucciones

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario