Sumitomo Drive Technologies JVOP-182-H Manual de usuario
LED Operator
Inverter HF-520 Option
Installation Manual
Type: JVOP-182-H
NOTICE
1. Make sure that this installation manual is dellvered to
the end user of inverter unit.
2. Read this manual before installing or operating the
inverter unit, and store it in a safe place for
reference.
Manual DM2307E-1
2
Copyright © 2014 Sumitomo Heavy Industries, LTD.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted, in any form or by any means, mechanical, electronic, photocopying,
recording, or otherwise, without the prior written permission of Sumitomo. No patent
liability is assumed with respect to the use of the information contained herein. Moreover,
because Sumitomo is constantly striving to improve its high-quality products, the
information contained in this manual is subject to change without notice. Every precaution
has been taken in the preparation of this manual. Sumitomo assumes no responsibility for
errors or omissions. Neither is any liability assumed for damages resulting from the use of
the information contained in this publication.
3
Table of Contents
1 PREFACE AND SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3 RECEIVING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4 OPTION COMPONENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5 INSTALLATION PROCEDURE . . . . . . . . . . . . . . . . . . . . . . .17
6 BASIC OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
7 RELATED PARAMETERS . . . . . . . . . . . . . . . . . . . . . . . . . . 24
8 OPTION FAULT DIAGNOSTICS. . . . . . . . . . . . . . . . . . . . . . 27
9 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
10 WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
4
1 Preface and Safety
1 Preface and Safety
Sumitomo manufactures products used as components in a wide variety of industrial
systems and equipment. The selection and application of Sumitomo products remain the
responsibility of the equipment manufacturer or end user. Sumitomo accepts no
responsibility for the way its products are incorporated into the final system design. Under
no circumstances should any Sumitomo product be incorporated into any product or design
as the exclusive or sole safety control. Without exception, all controls should be designed to
detect faults dynamically and fail safely under all circumstances. All systems or equipment
designed to incorporate a product manufactured by Sumitomo must be supplied to the end
user with appropriate warnings and instructions as to the safe use and operation of that part.
Any warnings provided by Sumitomo must be promptly provided to the end user. Sumitomo
offers an express warranty only as to the quality of its products in conforming to standards
and specifications published in the Sumitomo manual. NO OTHER WARRANTY,
EXPRESS OR IMPLIED, IS OFFERED. Sumitomo assumes no liability for any personal
injury, property damage, losses, or claims arising from misapplication of its products.
1 Preface and Safety
5
◆Applicable Documentation
The following manuals are available for the JVOP-182-H LED Operator Option:
LED Operator
LED Operator
HF-520, SF-520 Series
Installation Manual
Manual No: DM2307E
(this book)
Read this manual first.
The installation manual is packaged with the option
and contains information required to install the
option and set up related unit parameters.
RS-232C Interface Option
SF-520 Option RS-232C
Interface
Technical Manual
Manual No: DM2203E
The Technical Manual is packaged with the RS-
232C Interface Option and contains a basic
overview of wiring, settings, functions, and fault
diagnoses.
Inverter
Operating and Maintenance
Manual HF-520
Manual No: DM2301E
SF-520
Manual No: DM2201E
The unit manuals cover basic installation, wiring,
operation procedures, functions, troubleshooting,
and maintenance information.
The manuals also include important information
about parameter settings and unit tuning. Access
these sites to obtain Sumitomo instruction manuals:
http://cyclo.shi.co.jp
Technical Manual
HF-520
Manual No: DM2302E
SF-520
Manual No: DM2202E
SF-520
1 Preface and Safety
6
◆Terms
◆Registered Trademarks
Company names and product names listed in this manual are the registered trademarks of
those companies.
◆Supplemental Safety Information
Read and understand this manual before installing, operating or servicing this option. The
option must be installed according to this manual and local codes.
The following conventions are used to indicate safety messages in this manual. Failure to
heed these messages could result in serious or fatal injury or damage to the products or to
related equipment and systems.
Note: Indicates a supplement or precaution that does not cause unit damage.
LED: Light emitting diode.
Option: LED Operator
Drive: • HF-520 Series
• SF-520 Series
DANGER
Indicates a hazardous situation, which, if not avoided, will result in death or serious
injury.
1 Preface and Safety
7
■General Safety
WARNING
Indicates a hazardous situation, which, if not avoided, could result in death or
serious injury.
CAUTION
Indicates a hazardous situation, which, if not avoided, could result in minor or
moderate injury.
NOTICE
Indicates an equipment damage message.
General Precautions
• The diagrams in this section may include options and units without covers or safety shields to
illustrate details. Be sure to reinstall covers or shields before operating any devices. The option board
should be used according to the instructions described in this manual.
• Any illustrations, photographs, or examples used in this manual are provided as examples only and
may not apply to all products to which this manual is applicable.
• The products and specifications described in this manual or the content and presentation of the
manual may be changed without notice to improve the product and/or the manual.
DANGER
Heed the safety messages in this manual.
Failure to comply will result in death or serious injury.
The operating company is responsible for any injuries or equipment damage resulting
from failure to heed the warnings in this manual.
1 Preface and Safety
8
NOTICE
Do not expose the unit to halogen group disinfectants.
Failure to comply may cause damage to the electrical components in the option.
Do not pack the unit in wooden materials that have been fumigated or sterilized.
Do not sterilize the entire package after the product is packed.
9
2 Product Overview
2 Product Overview
◆About This Product
The option provides an enhanced unit user interface that can operate the Sumitomo unit from
up to 3 meters away. The option is an LED display that simplifies the task of interfacing with
the unit to perform these tasks:
• Read or modify unit parameters.
• Read and copy unit parameter settings to another Sumitomo unit.
• Operate the unit.
• Monitor unit operation status.
All keys except for the STOP key on the units built-in LED operator will not function when
the option is connected to HF-520 and SF-520. <1>
<1> If desired, to also disable the STOP key on the units built-in LED operator, set parameter o2-02 (STOP Key
Function Selection) to 0 (Disabled).
10
3 Receiving
3 Receiving
Perform the following tasks after receiving the option:
• Inspect the option for damage.
If the option appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the model number printed on the Name
plate of the option.
• If you have received the wrong model or the option does not function properly, contact
your supplier.
◆Contents and Packaging
Table 1 Contents of Package
■Parts Sold Separately
Proper installation of the option requires a digital operator cable (sold separately). A
communication cable may be purchased from Sumitomo or recommended LAN cables may
be used.
Description: Option Installation Manual
–
Quantity: 11
MANUAL
Tabla de contenidos
