SUBADA S7608 Manual de usuario

(Model: S7608)

Read this user manual carefully before you use the bottle warmer and save it for future reference

INSTRUCTION MANUAL

BOTTLE & POUCH WARMER

S7608

110V 60Hz, 220V 50Hz

1. To prevent damage to the appliance do not use alkaline cleaning agents when cleaning, use a

soft cloth and a mild detergent.

2. Cleaning and user maintenance shall not be made by children unless the y are aged 14 years

and above and supervised.

3. Keep this appliance and it's cord out of the reach of children.

4. This appliance is not intended for use by persons(including children) with reduced physical，

sensory or mental capabilities，or lack of experience and knowledge，unless they have been

given supervision or instruction concerning the use of the appliance by a person responsible for

their safety.

5. Children do not understand the dangers associated with operating electrical appliances.Never

allow children to use this appliance.

6. The heating element surface is subject to residual heat after use.Do not touch hot surfaces use

handles and knobs.

7. Ensure that the heating guidelines are followed to ensure that the food is not heated for too long.

8. For your child's safety-Always check food temperature before feeding by testing on a sensitive

part of your skin.

9. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions

or has been damaged in any manner.

10. If the supply cord is damaged it must be changed by a qualified person in order to avoid a

hazard.

11. Always use on a dry flat heat resistant kitchen surface.do not move appliance when in use.

12. Do not let the cord hang over edge of kitchen worksurface or touch hot surfaces.

13. Do not use any accessories other than those supplied with this appliance.

14. If the cordis correctly placed in the tidy the product will sit level.Do not start using the product

if it is not sitting level.

15. Regularly check the cord and plug for signs of damage, if visible remove from use immediately.

16.The water inside the unit gets very hot and can cause burns, please take care when removing

items from the food and bottle warmer.

Do not immerse the cord, plug or appliance in water or other liquid.

This appliance is intended to be used in household and similar applications such as: staff

kitchen areas in shops, offices and other working environments; farm houses; by clients in

hotels, motels and other residential type environments; bed and breakfast type environments.

Do not use outdors.

Before plugging in the food and bottle warmer for the first time ensure that the voltage is

compatible with your electricity supply by checking the label on the base of the unit. Ensure

water has been added to the unit before switching the unit on.

Do not immerse in water.

To protect against fire, electric shock and injury to persons do not immerse cord, plugs or other

parts of the unit in water or other liquid.

Misuse of the product may result in the risk of fire, electric shock and/or personal injury. This

appliance can be used by persons aged 14 years and above if they have been given

supervision or instruction concerning use of the appliance in a safe way and understand the

hazards involved.

Keep this instruction sheet for future reference as it includes important information.

200W

Check the appropriate voltage to plug in the power supply. The

bottle warmer is stand by when the light is flickering.The

appliance is switched on when the light is lit.

when plug in machine, long press for 2 seconds to enter MUTE

mode, after press the power button, machine will enter into

standby state, it can adjust the temperature or time, it can

change quickly when long press the button.

when plug in machine, long press for 2 seconds to restore the

factory default settings (except for the MUTE setting), after

press the power button, machine will enter into standby state, it

can adjust the temperature or time,it can change quickly when

long press the button.

"FAST" function is for fast heating/thawing, the working time

range can be set: 0.5-8 minutes, product startup: press "FAST"

function, the display screen shows the countdown time, after

the end of the countdown, machine will convert to "Milk"

function automatically, it will show the before default setting

temperature.（60ml milk, heat with MAX line water, 2.5

minutes can reach to 45°C）

Select this mode when you would like to warm a bottle of

milk/water with a temperature range of 37-60 ℃. "Milk" function

is to maintain the setting temperature for a long time.

Select this mode when you would like to warm containerl /jar of

baby food with a temperature range of 45-80℃.

Sterilize the baby bottle/pacifier with steam.

It’s forbidden to continuously start the "FAST" and "Sterilize" function of the

product. Multiple starts will cause over-temperature protection to end the work

in advance. It is recommended to use the machine until the water temperature

drops and then heat or replace the normal water to start the work.

NOTE:

1. Place the bottle or container in the bottle warmer. (Fig.1)

2. Fill the bottle warmer with 80ml distilled water. (Fig.2)

1. Place the bottle or container in the bottle warmer. (Fig.4)

2. Fill the bottle warmer with 80ml distilled water. (Fig.5)

3. Select FAST, the indicator light above will lit. (Fig.3)

At this setting, your are able to defrost/ heat up your frozen/

refrigerated milk/ baby food to liquid/ warmed state with

atimer selection of 2.5-8 minutes.

After this mode is completed, the bottle warmer will beep

five times and automatically turn to 24H constant warmin g

mode at the temperature level you selected last time at

WARM mode.

(Warming time depends on milk volume/ starting temperature/ bottle

material)

NOTE:

1. Due to the high variety of baby food consistencies, it is strongly recommended to

continuously stir and check while you are defrosting the baby food for an optimal result.

2. Note: The milk/ food should not be eaten directly after thawing.

NOTE:

1. SUBADA recommends to feed your baby as soon as possible

after the milk is warmed.We advise not to reheat the milk after it has

cooled down again.

2. Always check the temperature before you feed your baby (Fig.7).

FAST WARMING CONSTANT WARMING SETTING

3. Select MILK, the indicator light above will lit. (Fig. 6)

At this setting, your are able to heat up milk to a desired

temperature level from 37-60 ℃by touching or .

The screen will show real time temperature in degree

Centigrade.

(Before feeding, shake the milk well and even. Please make sure the

temperature is suitable for feeding.The bottle warmer will precisely

keep the milk/ water at the desired temperature for 24 hours to fit

every baby's preference in this mode. lt isnot recommended to warm

breast milk for too long.)

1. Place the food container/ jar (heat-resistant) in the bottle

warmer (Fig.8)

5. Please feed after a warming test with a spoon to ensure

the food is suitable for baby. (Fig.12)

1. Place the milk bottle (bottle mouth down) and pacifier in

the bottle warmer. (Fig.13)

2. Fill the bottle warmer with 30ml distilled water (Fig.14)

2. Fill the bottle warmer with 80ml distilled water (Fig.9)

4. Please remember to stir the food well before feeding.The

food container/ jar can be very hot after using this function,

please be cautious. (Fig. 11)

NOTE:

1. Due to the high variety of baby food consistencies, it is strongly recommended to

continuously stir and check while you are warming the baby food for an optimal result.

2. Due to the high variety of baby food consistencies, it is not possible to indicate

warming timings for baby food.

FOOD WARMING SETTING

STERILIZING

3. Select FOOD, the indicator light above will lit.(Fig.10)

At this setting, your are able to heat up baby food to a

desired temperature level from 45-80 ℃by touching

or .

The screen will show real time temperature in degree

Centigrade.

(The machine will stop working automatically after 2-hour food

warming.)

3. Select STERILIZE, the indicator light above will lit.

(Fig.15)

The bottle warmer is automatically off and the disinfection process is

completed after the water is dried. (The longest working hour for this

mode is 10 minutes.)

1. Unplug the bottle warmer and make sure it cooling down

before cleaning. (Fig.16)

2. Unplug the bottle warmer before you empty it.

3. Empty the bottle warmer and rinse its inside thoroughly.

2. Pour out water from the tank for hygienic reason. (Fig.17)

3. Wipe the bottle warmer with a moist and clean cloth

inside out. (Fig.18)

Do not use abrasive, anti-baterial cleaning agents,

chemical solvents or sharp tools to clean the device.

NOTE:

1. You can also use citric acid based descalers.

2. Note: Do not use other types of descalers.

NOTE:

lf you used the bottle warmer to warm containers with baby

food, make sure that no spilled baby food remains on the

bottom of the bottle warmer.

1. Mix 50m/1.7oz of white vinegar with 100ml/3.4oz of cold water to descale the

bottle warmer. Switch on the bottle warmer, select the mik warming setting and let

the appliance operate for 10 minutes. Leave thes olution in the bottle warmer until

all scale has dissolved.

This symbol means that this product shall not be disposed of with normal household waste.

Follow your country's rules for the separate collection of electrical and electronic products.Correct disposal

helps prevent negative consequences for the environment and human health.

lt is recommended to descale the bottle warmer every four weeks to ensure it

continues to work efficiently.

lf you still see traces of scale after rinsing, repeat the descaling procedure.

Manuales populares de Calentador de alimentos de otras marcas

ARREDO

ARREDO Illusion 1000 Manual de usuario

Vollrath

Vollrath Mirage 74701DW Manual de usuario

Moffat

Moffat BKRW3 Manual de servicio

Hupfer

Hupfer SPTW-2/EBF Manual de usuario

Kontour

Kontour K1043E Manual de usuario

Hatco

Hatco Glo-Ray GRMW-3 Guía de aplicación

HATO

HATO Macho Nacho FST-1-MN Manual de usuario

Wittco

Wittco 500-CW Manual de usuario

Wells

Wells SS-276ULT Manual de usuario

Kerbl

Kerbl FastHeat Manual de usuario

Johnson

Johnson Kaldino Manual de usuario

Dräger

Dräger Babytherm 8004 Manual de usuario

APW Wyott

APW Wyott Classic RCW - 7 Manual de usuario

Wells

Wells BMW206ULRTD/AF Manual de usuario

KRATOS

KRATOS 29М-008 Manual de usuario

Wells

Wells M227 Series Manual de usuario

Henny Penny

Henny Penny HCS-2 Manual de usuario

Amba

Amba RADIANT RSWH-P Manual de usuario