Sub-Zero DEU2450R Guía

New Designer Series

Undercounter Refrigeration

Design Guide

REVISED 10/2020

Contents

3Designer Series Undercounter Refrigeration

4Overall Dimensions

5Opening Dimensions

6Electrical

6Plumbing

7Door Panel

11 Wine Rack Facing

12 Warranty

Features and speciﬁcations are subject to change at any

time without notice. Visit subzero.com/specs for the

most up-to-date information.

Throughout this guide, dimensions may vary by ± ⁄" (3).

Dimensions in parentheses are millimeters unless other-

wise speciﬁed.

Designer Series Undercounter Refrigeration

subzero.com | 3

DESIGNER SERIES UNDERCOUNTER MODELS

Designer Series Undercounter Refrigeration

The Sub-Zero Designer Series Undercounter Refrigeration

is a helpful addition to a master suite, bar, home oce, or

media room. Choose from an all refrigerator, combina-

tion with ice maker, beverage center, wine unit, or outdoor

refrigerator. The design ﬂexibility of these compact yet

roomy units makes them all the more welcome in any

room or outdoor kitchen. They are ready to be ﬁtted with

a custom or stainless steel panel.

DEU2450R

DEU2450CI

DEU2450BG

DEU2450W

DEU2450RO

Designer Series Undercounter Refrigeration

4 | Sub-Zero Customer Care 800.222.7820

Specifications

261/2"

(673)

24" (610) 231/8"(587)

HEIGHT DIMENSIONS ±

1/2" (13)

95/8"

(245)

341/2"

(876)

Overall Dimensions

DESIGNER SERIES UNDERCOUNTER MODELS IMPORTANT NOTE: Overall dimensions do not include

panels or handles. Dimensions will vary with panel

thickness.

subzero.com | 5

Specifications

DUAL INSTALLATION

If two units are installed side by side, a dual installation kit

may be required. Installations without a custom ﬁller strip

require a dual installation kit. If a dual installation kit is not

speciﬁed, a 2" (51) ﬁller strip is recommended between the

units. Dual installations without a ﬁller strip can only be

accomplished using two units with opposite hinges. Refer

to the illustrations below.

IMPORTANT NOTE: For dual installations of a door and

drawer model, the door model face frame is approximately

⁄" (2) proud of the drawer face frame. This is only appar-

ent when the door/drawers are open at the same time.

The door/drawers align when closed. The door handle

must be next to the drawers.

Dual installation kits are available through an authorized

Sub-Zero dealer. For local dealer information, visit the

ﬁnd a showroom section of our website, subzero.com.

For questions regarding the installation, call Sub-Zero

Customer Care at 800-222-7820.

DUAL OPENING WIDTH W

Two 24" Models 48" (1219)

Dual installation kit required.

Opening Dimensions

DESIGNER SERIES UNDERCOUNTER MODELS

24" (610)

OPENING WIDTH

341/2"(876)

OPENING

HEIGHT

TOP VIEW

SIDE

VIEW FRONT VIEW

NOTE:

31/2"(89) finished returns will be visible and should be finished to match cabinetry.

3/4"(19)

TYPICAL

FRAMED

CABINETRY

24"

(610)

FILLER

31/2"(89)

FINISHED

RETURN

FRAMELESS

CABINETRY

24"

(610)

3/4"(19)

TYPICAL

31/2"(89)

FINISHED

RETURN

24" (610)

OPENING

DEPTH

WITHOUT FILLER STRIP FILLER STRIP

Opposite hinges

Same side hinges

The depth of each model is 23⁄" (587). Allow for panel

thickness when planning the ﬁnished opening depth. A

minimum 3⁄" (89) ﬁnished return is required on all sides of

the opening. Framed cabinets require additional ﬁnished

ﬁller material behind the face frame for a proper installa-

tion. Refer to the illustration above.

6 | Sub-Zero Customer Care 800.222.7820

Electrical Requirements

Installation must comply with all applicable electrical codes.

The electrical supply must be located within the shaded

area shown in the illustration below. A separate circuit

servicing only this appliance is required.

IMPORTANT NOTE: For indoor models, a ground fault cir-

cuit interrupter (GFCI) is not recommended and may cause

interruption of operation.

For the outdoor model, a ground fault circuit interrupter

(GFCI) is required to reduce the risk of electrical shock.

The electrical outlet must be positioned with the ground-

ing prong to the right of the thinner blades.

CAUTION

The outlet must be checked by a qualiﬁed electrician

to be sure it is wired with the correct polarity. Verify

the outlet is properly grounded.

WARNING

Do not use an extension cord, two-prong adapter, or

remove the power cord ground prong.

ELECTRICAL REQUIREMENTS

Electrical Supply 115 VAC, 60 Hz

Service 15 amp dedicated circuit

Receptacle 3-prong grounding-type

Specifications

1/4" (6)

(102)

(76)

(229)

FLOOR

RIGHT SIDE

OF OPENING

Electrical supply location

Plumbing Requirements

MODEL DEU2450CI

Installation must comply with all applicable plumbing

codes.

For ease of installation, recess the water shut o into the

wall or place it in an adjacent cabinet. Locate the water

supply line within the shaded area shown in the illustra-

tion below. Connect the water supply line to the house

supply with an easily accessible shut-o valve. Do not use

self-piercing valves.

An in-line ﬁlter is required when water conditions have a

high sediment content.

A reverse osmosis system can be used provided there is

constant water pressure of 35–120 psi (2.4–8.3 bar) supplied

to the unit at all times. A copper line is not recommended

for this application.

PLUMBING REQUIREMENTS

Water Supply Line ⁄" OD copper, braided

stainless steel, or PEX tubing

Water Pressure 35–120 psi (2.4–8.3 bar)

Excess Water Line for Connection 5' (1.5 m)

(102)

(76)

(229)

LEFT SIDE

OF OPENING

AREA EXTENDS 1/2"(13)

FORWARD ON FLOOR

Water supply location

subzero.com | 7

Door Panel

Custom Panel

For Designer Series Undercounter models, a custom door

panel and handle hardware must be provided. Refer to the

following charts for panel requirements and dimensions.

Do not install a solid panel on the glass door unit. A solid

door is available as a sales accessory through an autho-

rized Sub-Zero dealer.

The panel cannot exceed the maximum panel weight indi-

cated in the chart below. The depth of each model is 23⁄"

(587). Allow for panel thickness when planning the ﬁnished

opening depth.

CAUTION

As reveals between cabinetry and the unit decrease,

severe ﬁnger pinching can occur while the door is

closing.

Finish all sides of the custom panel. They may be visible

when the door is open or through the glass of glass door

models.

A D-style handle is recommended. Locate the door handle

near the edge of the panel opposite the hinge and cen-

tered top to bottom. Stainless steel tubular and pro handles

are available through an authorized Sub-Zero dealer. For

local dealer information, visit the ﬁnd a showroom section

of our website, subzero.com.

PANEL REQUIREMENTS

Panel Weight 22 lb (10 kg) max

Panel Thickness ⁄" (16) min–⁄" (19) max

Stainless Steel Panel

Stainless steel panels are available through an authorized

Sub-Zero dealer. Stainless steel panels include a stainless

steel kickplate cover. The outdoor model requires the use

of a Sub-Zero stainless steel outdoor accessory panel. For

local dealer information, visit the ﬁnd a showroom section

of our website, subzero.com.

Minimum ⁄" (3) reveals are required.

8 | Sub-Zero Customer Care 800.222.7820

Custom Panel

TYPICAL PANEL DIMENSIONS

PANEL DIMENSIONS

MODEL W H

24" Model 23⁄" (603) 30⁄" (772)

STILES / RAILS MIN*

Stiles 3⁄" (83)

Top Rail 3⁄" (89)

Bottom Rail 4⁄" (114)

*Glass door models only.

DUAL INSTALLATION

For dual installations, refer to the chart below for typical

panel dimensions.

PANEL DIMENSIONS—DUAL INSTALLATION

MODEL W H

24" Model 23⁄" (605) 30⁄" (772)

Door Panel

subzero.com | 9

Door Panel

Custom Panel

TOE KICK CLEARANCE

The height of the toe kick area can extend beyond the

typical toe kick height, provided it does not exceed the

dimensions in the illustration below. For questions

regarding the installation, call Sub-Zero Customer Care

at 800-222-7820.

MAXIMUM DOOR OPENING

As the panel width and/or depth increases, so does the

potential for panel interference. Interference may be

minimized by using the 90° door stop.

3/8" (10)

DOOR CLOSED

3/4" (19) PANEL

1/8" (3) REVEAL

ADJACENT

CABINETRY

DOOR

OPEN

90°

DOOR OPEN

MAXIMUM 115°

Maximum door opening (top view)

DOOR

PANEL HINGE

231/8"(587)

TO BACK OF UNIT

2" (51)

41/2" (114)

FROM

FLOOR

31/2" (89)

MAX DEPTH

11/8" (29)

KICKPLATE

ADJUSTMENT

341/2"(876)

TYPICAL

PRODUCT

HEIGHT

DECORATIVE KICKPLATE

CANNOT EXTEND

BEYOND THIS

POINT

33/8" (86)*

DECORATIVE

KICKPLATE

HEIGHT

*Not included. Dimension will vary as the product height increases or decreases

from the typical product height.

Toe kick clearance (side view)

10 | Sub-Zero Customer Care 800.222.7820

Standard Handles

Optional stainless steel tubular and pro handles are avail-

able through an authorized Sub-Zero dealer. For local

dealer information, visit the ﬁnd a showroom section of

our website, subzero.com.

Refer to the chart below for standard handle lengths for

Designer Series Undercounter models.

HANDLE LENGTH TUBULAR PRO

24" Model 24⁄" (614) 22⁄" (572)

Outdoor Model NA 22⁄" (572)

Door Panel

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Refrigerador de Sub-Zero

$Sub-Zero \601RG Manual de usuario$

Sub-Zero

Sub-Zero \601RG Manual de usuario

Sub-Zero

Sub-Zero Sub-Zero BI series Manual de servicio

Sub-Zero

Sub-Zero Built-In Refrigeration Manual de usuario

Sub-Zero

Sub-Zero 700BR Instrucciones de montaje

Sub-Zero

Sub-Zero Designer Series Manual de usuario

Sub-Zero

Sub-Zero 700BR Manual de usuario

Sub-Zero

Sub-Zero Sub-Zero 648PROG Manual de usuario

Sub-Zero

Sub-Zero BI-36U Manual de usuario

Sub-Zero

Sub-Zero 736TCI Manual de usuario

Sub-Zero

Sub-Zero Built-in Series Manual de funcionamiento

Sub-Zero

Sub-Zero IC-27R Manual de usuario

Sub-Zero

Sub-Zero Sub-Zero BI series Manual de usuario

Sub-Zero

Sub-Zero ID-36RP Manual de usuario

Sub-Zero

Sub-Zero UC-24RO Manual de usuario

Sub-Zero

Sub-Zero UC-24C Manual de usuario

Sub-Zero

Sub-Zero BI-42SD/S/PH Manual de usuario

Sub-Zero

Sub-Zero Sub-Zero BI series Manual de usuario

Sub-Zero

Sub-Zero Designer Series Manual de usuario

Sub-Zero

Sub-Zero IC-27R Manual de usuario

Sub-Zero

Sub-Zero BI-48SD Instrucciones de montaje

Sub-Zero

Sub-Zero 315W Guía

Sub-Zero

Sub-Zero IC-24R-RH Manual de usuario

Sub-Zero

Sub-Zero UC-24BG Manual de usuario

Sub-Zero

Sub-Zero BI-48SD Manual de usuario

Manuales populares de Refrigerador de otras marcas

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Manual de usuario

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Manual de usuario

Sharp

Sharp SJ-BA31IEXW2-EU Manual de usuario

CORBERO

CORBERO CC2300MCW Manual de usuario

KitchenAid

KitchenAid 2205264 Manual de usuario

Stengel

Stengel KU 1101 A++ Manual de usuario

NEFF

NEFF KI181 Series Manual de usuario

Hoshizaki

Hoshizaki Reach-In Manual de usuario

Amana

Amana ASD2524VES00 Manual de usuario

BOMANN

BOMANN KGC 213 Manual de usuario

Danby

Danby DAR044A1SLDD Instrucciones de montaje

Samsung

Samsung RF323TE Manual de usuario

Beko

Beko CSA31022 Manual de usuario

IKEA

IKEA FROSTIG C 185 E Manual de usuario

Electrolux

Electrolux ER 6821 D Manual de usuario

True

True TS-28 Manual de usuario

Frigidaire

Frigidaire FSC23R5DW9 Manual de usuario

Beko

Beko LSP4579W Manual de usuario