Stumpfl PIXERA four Manual de usuario

GENERATION

MEDIA

SERVER

PIXERA four

MANUAL

English | 2020-09 | V20

Manual PIXERA Server 3

Table of Contents

Important Information............................................................................................................................................. 5

Identifying the product and other information ................................................................................................... 5

General information about this instruction manual ........................................................................................... 5

Safety information ............................................................................................................................................... 6

Installation on site ............................................................................................................................................... 7

Initial installation ................................................................................................................................................. 9

Operation, maintenance, modifications, cleaning and disassembly ................................................................. 10

Instructions for disposal .................................................................................................................................... 13

Specifications ......................................................................................................................................................... 14

Ambient temperature ....................................................................................................................................... 14

Relative humidity .............................................................................................................................................. 14

Airflow considerations ...................................................................................................................................... 14

Scope of delivery ............................................................................................................................................... 14

Warranty ........................................................................................................................................................... 14

Environmental specifications – operating ......................................................................................................... 15

Environmental specifications – storage ............................................................................................................ 15

Power supply ..................................................................................................................................................... 15

Heat dissipation ................................................................................................................................................. 15

Physical .............................................................................................................................................................. 16

Dimensions ........................................................................................................................................................ 17

Front view .............................................................................................................................................................. 18

Front view PX4................................................................................................................................................... 18

Description front views ..................................................................................................................................... 18

Rear view ............................................................................................................................................................... 19

Options PX4 ........................................................................................................................................................... 20

Performance upgrade ....................................................................................................................................... 20

Video Outputs ................................................................................................................................................... 21

Output option: GUI Output ............................................................................................................................... 21

Output option: Framelock and Genlock ............................................................................................................ 22

NVMe-SSD option: 7,68TB (10GB/s).................................................................................................................. 23

NVMe-SSD option: 15,36TB (10GB/s)................................................................................................................ 23

NVMe-SSD option: 30,72TB (10GB/s)................................................................................................................ 23

NVMe-SSD option: 7,68TB (20GB/s).................................................................................................................. 23

NVMe-SSD option: 15,36TB (20GB/s)................................................................................................................ 23

NVMe-SSD option: 30,72TB (20GB/s)................................................................................................................ 24

NVMe-SSD option: 61,44TB (20GB/s)................................................................................................................ 24

Network Card option: 1GbE Quad .................................................................................................................... 25

Network Card option: 25GbE Quad .................................................................................................................. 25

Live input option: HDMI1.4-I2 ........................................................................................................................... 26

Live input option: HDMI2.0-I2 ........................................................................................................................... 26

Live iput option: 3GSDI-I4 .................................................................................................................................. 27

Live input option: HDMI2.0 /4x 3GSDI .............................................................................................................. 28

Live input option: 4x 12G SDI IO/8x 3GSDI IO ................................................................................................... 29

Audio output option: HDSPe AIO ...................................................................................................................... 30

Audio output option: HDSPe AES ...................................................................................................................... 31

Mechanical installation .......................................................................................................................................... 32

Mounting the Rail Kit on PX4 ............................................................................................................................ 33

Starting up the media server ................................................................................................................................. 35

Software ................................................................................................................................................................ 36

Media Server Operating System........................................................................................................................ 36

Standard User Names and Passwords ............................................................................................................... 36

Preinstalled Programs ....................................................................................................................................... 37

Startmenu .......................................................................................................................................................... 38

EDID Management ............................................................................................................................................ 39

Genlock and Framelock Setup ........................................................................................................................... 41

Mosaic Setup ..................................................................................................................................................... 42

CLI programs to change screen resolution, setup mosaic and set sync ............................................................ 44

Resetting the Operating System ........................................................................................................................ 45

Making Updates ................................................................................................................................................ 45

Servicing ................................................................................................................................................................. 46

Replacing the power supply .............................................................................................................................. 46

Backlight ON/OFF .............................................................................................................................................. 47

AV Stumpfl contact ................................................................................................................................................ 48

Imprint ............................................................................................................................................................... 48

Declaration of Conformity ..................................................................................................................................... 49

Manual PIXERA Server 5

Important Information

Identifying the product and other information

This instruction manual relates to media server and media player systems from AV Stumpfl GmbH.

The model designation and serial number are located on the media server’s serial number tag.

The serial number tag is located on the back of the unit.

General information about this instruction manual

With this instruction manual, users of AV Stumpfl GmbH media servers are provided the necessary

information for the safe use of their systems.

The safety instructions resulting from the legally prescribed risk analysis and assessment are an essential

part of these instructions.

 IMPORTANT! Please read these instructions carefully before using your system! Store this

instruction manual in a safe place for later reference.

 IMPORTANT! Due to the high number of possible configurations, it is not possible to provide

specific instructions for all the individual components in this manual.

For specific questions and further support, please contact us at:

AV Stumpfl GmbH, Tel: +43 (7249) 42811, suppo[email protected]om

Subject to change without notice. All information is provided without guarantee and liability.

Safety information

The safety information in this instruction manual can be broken down into the following categories:

 WARNING is used for hazards that could result in death or serious injuries.

 CAUTION is used for hazards that could result in minor injuries.

 IMPORTANT is used for all other cases where the potential for material damage exists or specific

actions are recommended.

Target group/qualifications

The use of media server systems requires specialist AV and IT knowledge. For this reason, the use of media

server systems should be limited to qualified personnel. Media server system owners and operators must

ensure this via organizational measures.

The qualified personnel responsible for installation and maintenance must also be able to prevent any

remaining risks in terms of health and safety with their understanding of the existing dangers.

Warning about electrical hazards

Electrical hazards can arise across a media server system’s entire life cycle. These can arise not only from

the media server system, but the electrical installation on site as well.

 WARNING! Dangerous situations can arise from the careless handling of the server system or faulty

electrical installation.

These can result in severe injury or death!

o Extreme care should be used when working on the media server system.

o Always consult the responsible specialists when working with dangerous voltages.

Intended use

The media server systems are meant exclusively for use in rooms with normal operating conditions

(temperature, humidity, radiation) such as air-conditioned server rooms, offices and other rooms with

similar conditions.

Warning about foreseeable misuse

 WARNING! Dangerous situations can arise from using the server systems in unsuitable

environments.

These can result in severe injury or death!

o Only use the media server systems in professional AV and IT environments!

o The use of the media server systems in special environments, such as medical facilities,

potentially explosive environments or areas with unusually high EMC requirements, is not

permitted!

 WARNING! Dangerous situations can arise from unauthorized modifications.

These can result in severe injury or death!

o Do not attempt to modify the existing protections!

Manual PIXERA Server 7

Installation on site

Checking for transport damages

Check the packaging and the media server system for possible damage that could have arisen during

transport. If you find damage, please report it immediately to your vendor or AV Stumpfl GmbH.

 IMPORTANT! Add-on cards can sometimes become partially detached from their slots during

transport.

In this case please report it immediately to your vendor or AV Stumpfl GmbH.

Danger from condensation

 WARNING! A difference in temperature of 15°C between the room’s temperature and the media

servers can lead to condensation. This can lead to short circuits and other damage. These can lead

to the risk of electrocution. Electrocution can result in severe injury or death!

o Please ensure that the server system is not subject to quick changes in temperature!

o Give the system time to acclimate to its environment.

o Do not operate the server system if condensation has formed!

Danger from incorrect posture and overexertion

 WARNING! Due to the weight and dimensions of the server system, physical danger can arise

during set up and installation.

o Avoid incorrect posture and overexertion (e.g. from lifting heavy objects)!

Danger from tipping

 WARNING! The server system can tip over from improper transport or installation. This is

particularly true for rack systems that have a high center of gravity due to their construction.

This can result in severe injury or death!

o Transport the system with the necessary care!

o Ensure secure installation on a flat and level surface.

o Rack systems must be anchored to a suitable solid surface!

o When installing devices into the rack, start at the lowest slot and work upwards. Install the

heaviest devices at the bottom of the rack!

o Only remove one device at a time from a rack!

Installation on site

AV Stumpfl GmbH recommends installing the server in an air-conditioned server room. Select a site that is:

 Clean, dry and free of particles in the air (except for normal dust).

 Not near sources that cause vibrations or shaking.

 Protected from strong electro-magnetic fields that arise from electrical devices.

 Provides access to a properly grounded wall socket.

 Able to be equipped with surge protection, particularly in areas subject to thunderstorms.

 Provides sufficient space for access to the power cables, as these are the primary way to disconnect

the server from the power supply.

 Provides sufficient space to ensure air circulation (for cooling).

Danger from noise

 WARNING! Some server systems emit noise. Generally, this noise is produced by the system fans.

In certain situations, this can lead to hearing damage. Communication near such server systems can

also be impaired.

o Use care when selecting an installation site for such servers!

o There must be no permanent impairment!

Manual PIXERA Server 9

Initial installation

Notes for rack system installations

Install a line disconnector for the entire rack system.

This line disconnector must be easily accessible and have a label that states that it controls the power

supply to the entire unit and not just the servers.

Danger from improper voltage supply

 WARNING! Dangerous situations can arise from improper voltages. These can lead to the risk of

electrocution.

Electrocution can result in severe injury or death!

o Only operate the server system using the voltage specified in this manual!

The server system can be operated in combination with an uninterruptible power supply (UPS). In this case,

please follow the instruction manual for the UPS system!

Danger from improper grounding

 WARNING! Dangerous situations can arise from improper grounding. These can lead to the risk of

electrocution.

Electrocution can result in severe injury or death!

o Please ensure that the server system and/or the rack itself and all incorporated devices are

properly grounded!

o For such work, always consult the responsible specialists.

Proper grounding is also very important for protection against EMC interference.

Danger from fire

 WARNING! Dangerous situations can arise from improper electrical installations. These can lead to

the risk of fire.

Fires can result in severe injury or death!

o Please ensure that electrical installations are properly performed!

o Always consult the responsible specialists for such work.

Operation, maintenance, modifications, cleaning and disassembly

Electrical hazards

Incidents arising from electrical hazards can occur during operation, maintenance, when making

modifications, cleaning or disassembling the server.

Turn off all connected peripheral devices before opening the media server system.

NOTE: Opening the media server system will void its warranty!

 WARNING! Dangerous situations can arise if the server system is not turned off before opening the

system.

These can result in severe injury or death!

o Ensure that the media server system is disconnected from the power source before

opening!

o Turn off the media server system via the power switch and unplug all power cables from

the outlet!

o Ensure that the media server system will not be plugged in unexpectedly by another person

or that the system will unexpectedly restart after an interruption in the power supply.

Additional comments on the subject:

 The power button will NOT disconnect the system from the source of power. The server system

must be completely disconnected from the source of power.

 To do this, all power cables must be removed from the electrical outlet.

 A system may be equipped with multiple power cables. In such cases, ensure that all power cables

have been unplugged.

 Do not make any modifications to the power cable and do not use any cables except those with the

correct specifications. Each power supply in the system must be connected to the power source via

its own cable.

 Power supplies do not have any parts that can be serviced by the user.

 Never open a power supply. Power supplies contain dangerous voltages, currents and energy

sources. Send the device back for any necessary maintenance work.

 The server system can unexpectedly restart after an interruption in the supply of power.

One exception is components that can explicitly be plugged in (hot-plug) or swapped (hot-swap) during

operation. Please note the following safety instructions for hot-plug power supplies.

Electrical hazards related to hot-plug power supplies

Electrical accidents can occur when exchanging hot-plug power supplies.

 WARNING! Dangerous situations can arise from the careless handling of hot-plug power supplies.

These can result in severe injury or death!

o Unplug all power cables of a hot-plug power supply before swapping it out!

Avoiding data loss

 IMPORTANT! Remember to backup your data before performing any maintenance or any other

similar work inside your media server system.

Check to ensure that your data restoration system works properly.

Tabla de contenidos

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario