Studio Designs Master's Touch Art & Craft Station Manual de usuario
Thank you for purchasing our Studio Designs, Inc.
Distributed By: Master’s Touch®
Art & Craft Station
#10108 Charcoal/Clear Glass
Rev. 9.18.2018
Ofce: 562.942.0492
Product Support Line: 866.942.0492
www.studiodesigns.com
Master’s Touch®Art & Craft Station p.2
ASSEMBLY INSTRUCTIONS - IMPORTANT:
Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take
care when assembling the unit and always set the parts on a clean, soft surface. Do not use power tools to
assemble. A Phillips screwdriver may be required for assembly. If you require any assistance with assembly,
parts, or information on other products, please visit our website: www.studiodesigns.com or call us. Check
screws, nuts and bolts periodically (or every 6 months). Tighten if necessary.
Help us improve our products by lling out our Customer Response Card at www.studiodesigns.com/crc.
WARNING:
Weight limit: Top: 25 lbs. | Side and Bottom Shelf: 15 lbs. each.
Do not exceed this limit! Please use care and good judgement when using your furniture.
Master’s Touch®Art & Craft Station p.3
1. Left Leg 1
2. Right Leg 1
3. Left Arm 1
4. Right Arm 1
5. Top Frame 1
6. Glass Top 1
7. Side Shelf 1
8. Rear Bar 1
9. Front Bar 1
10. Support Bar 1
11. Rear Panel 1
12. Bottom Shelf 1
13. Basket Rail 4
PARTS LIST
DESCRIPTION QTY PICTURE
Master’s Touch®Art & Craft Station p.4
14. Basket 2
15. Pencil Ledge 1
16. Ratchet Arm 1
17. L Bracket 2
18. Knob 2
19. Floor Leveler 4
20. Nut 4
21. Pin 4
22. Allen Bolt - 1/4" x 1-5/8" 7
23. Allen Bolt - 1/4" x 5/8" 2
PARTS LIST
DESCRIPTION QTY PICTURE
Master’s Touch®Art & Craft Station p.5
24. Allen Bolt - 1/4" x 1/2" 14
25. Allen Bolt - 1/4" x 5/16" 2
26. Phillips Bolt - 5/32" x 1/2" 8
27. Glass Spacer 4
28. Cushion 2
29. Phillips Screw - 1/2" 4
30. Allen Screw 3
31. Metal Tray 1
32. Cup 1
33. Foam Tray 1
34. Allen Wrench 1
35. Hex Wrench 1
PARTS LIST
DESCRIPTION QTY PICTURE
Master’s Touch®Art & Craft Station p.6
1
20
20
11
24
24
19
19
19
19
1
2
Do not fully tighten any bolt until step 4.
Master’s Touch®Art & Craft Station p.7
3
12
10
4
22
22
18
18
22
2
Screw Knobs (18) into rst hole in Left and Right Arms (3 and 4).
Master’s Touch®Art & Craft Station p.8
3
8
9
16
22
22
22
22
24
Master’s Touch®Art & Craft Station p.9
4
13
13
26
24
24
28
28
26
26
26
Repeat step to assemble two more Rails (13) on left side (see arrows).
Fully tighten all bolts from Step 1-4.
Master’s Touch®Art & Craft Station p.10
5
29
29
7
7
13
29
14
14
21
Insert Baskets (14) and Insert one Pin (21) into front holes in Rails to prevent Basket from falling out.
Slide Shelf (7) to edge of Rail (13), then attach Screws (29).
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de De oficina de Studio Designs
