Stryker SR-89MC Manual de usuario
A1.140107
CONTENTS
FUNCTIONS AND CHARACTERS.......................................................1
STANDARD ACCESSORIES................................................................2
OPTIONAL ACCESSORIES.................................................................2
INSTALLATION.....................................................................................2
Microphone connection................................................................................2
Antenna connection.....................................................................................3
Power connection ........................................................................................3
Fuse replacement........................................................................................3
Install Microphone hanger.............................................................................4
Intall external speaker..................................................................................4
Install earphone ...........................................................................................4
Install Remote PTT cable.............................................................................4
KNOW ABOUT THIS RADIO................................................................5
HOW TO USE THIS RADIO..................................................................6
Power on radio.............................................................................................6
Automatical Power on radio.........................................................................6
Channel control............................................................................................6
Choose Norms.............................................................................................6
Volume control (1-56 levels, Default level 54) .............................................7
Mute Function..............................................................................................7
Squelch control (1-28 Levels, Default Level 6)............................................7
ASQ control .................................................................................................7
LCD display .................................................................................................8
AM/FM mode ..............................................................................................8
Transmitting .................................................................................................8
Receiving.....................................................................................................8
Time Out Timer ............................................................................................9
LCD color.....................................................................................................9
Beep prompt ................................................................................................9
EMG channel...............................................................................................9
Keypad lock ...............................................................................................10
Frequency mode........................................................................................10
Scan...........................................................................................................10
Memory channel ........................................................................................10
Using Memory Channel .............................................................................10
DW channels ............................................................................................. 11
Using DW function..................................................................................... 11
Factory reset.............................................................................................. 11
12
Specication ......................................................................................
1
FUNCTIONS AND CHARACTERS
Full Aluminum body offer best heat radiation
Remote control microphone with Wide angle Dot matrix LCD
3 color display: Blue, Purple, Orange
Dual watch
Full channel scan
EMG Channel CH9/19
SQ and ASQ Control
4 Memory channels for each Norm
SQ, VOL, voltage level display
Field strength display
Automatic Power on/Manual Power on
Time Out Timer
Keypad lock
Channel and Frequency mode
Optional earphone for Microphone
Optional remote PTT control cable
2
STANDARD ACCESSORIES
OPTIONAL ACCESSORIES
INSTALLATION
Screws for bracket
Hanger
Pads for bracket
Self-tapping Screws
Adjusting knobs Pads
Fuse(2A,250V)
Choose a conveniet location to install the radio.
1. Mark the location for screws by tracing the bracket.
2. Attach the bracket using the supplied screws.
3. Secure radio base into install bracket and lock in position by tightning knobs.
Microphone connection
1. Plug microphone connector into jack.
2. Pull on the dustproof cover for microphone connector.
Earphone
HS03
Remote PTT Control Cable
EK01
3
Antenna connection
Power connection
Note: Never press PTT before install the antenna, it could damage the radio.
1. Screw on the PL-259 from your antenna into antenna jack.
2. For proper operation of this radio, it is necessary to install the antenna in a well
grounded place, and adjust the SWR.
* Please consult with your local dealer for choosing and intallation of suitable antenna.
This radio requires a 13.2V power supply.
Connect the red wire to the positive terminal of the battery, and the black wire to the
negative terminal of the battery.
Fuse replacement
This radio requires 2A, 250V fuse
1. Open the fuse holder
2A, 250V FUSE
IN-LINE
FUSE HOLDER
2. Replace the fuse and screw on the holder.
FUSE
IN-LINE
FUSE HOLDER
IN-LINE
FUSE HOLDER
IN-LINE
FUSE HOLDER
4
Intall Microphone hanger
Connecting an external speaker
Connecting hearphones
Connecting a Remote PTT cable
1. Choose suitable location and mark for screw point.
2. Attach the hanger using the supplied screws.
This radio can use a 4-8 ohm, 4W external speaker.
1. Install the external speaker in the desired location.
2. Plug in the speaker connector into the jack.
1. Open the jack cover
2. Plug in the hearphone into MIC/SP jack.
1. Open the jack cover
2. Plug in the Remote PTT cable into PTT jack.
5
KNOW ABOUT THIS RADIO
1FUNC/FRQ Function menu / frequency mode
2EMG/M1 EMG CH9 and CH19, or program with second function
3DW/M2 Dual watch, or program with second function
4SC/M3 Channel scan, or program with second function
5AF/M4 AM/FM selection, or program with second function
6VOL-, Squelch level - Decrease volume or Squelch level
7VOL+, Squelch level + Increase volume or Squelch level
8MT/SET Mute, Menu, Lock key
9PTT Transmitting
10 SQ, ASQ SQ/ASQ switch
11 POW Power key
12 UP Channel UP
13 DN Channel down
14 TX indicator
15 RX indicator
16 LCD
17 Ext MIC/SP jack
18 Ext remote PTT cable jack
19 Mike
20 Speaker
PTT
9
10
18
17
6
HOW TO USE THIS RADIO
Power on radio
Automatic Power on
Channel control
Choose Norms
1. Press key to turn on the radio.
1. Short Press key, F Icon appear and flashes.
2. Short Press key to enter Menu.
3. Repeatly short press key until LCD displays
BAND: XXX
4. Press or to choose the norms
5. Short press any other key to confirm and exit.
:
When the radio is on, hold esaelernehtdnaffosithgilbbbDCLehtlitnuyek
key, the radio will power off.
2. Adjust squelch level until you can hear background noise, refer to Page 7 for
Squelch level setup.
3. Adjust volume level to the desired level, refer to Page 7 regarding Volume level setup.
1. Short Press or key to choose
the desired channel.
2. Hold or key to choose channels faster.
DN
POW UP
1. Short Press key, F Icon appear and flashes.
2. Short Press key to enter Menu.
3. Repeatedly short press key until LCD displays
POR: XXX
4. Press or to choose POR: ON.
5. Short press any other key to confirm and exit.
Repeat the above operation will turn off Automatic power on.
7
ASQ control
1. Hold SQ/VOL key until the LCD displays AQ.
The ASQ function was turn on.
2. Repeat above function will switch between SQ and
ASQ, in ASQ mode, SQ squelch level setup menu
will disappear and LCD displays SQ : AQ
Volume control ( 1-56 levels, Default level 54 )
Mute Function
1. Press SQ/VOL key repeatedly, until LCD display VOL: XX
XX stands for volume level.
2. Short Press or key to choose wanted volume level.
3. Hold quickly increase volume level, hold will quickly decrease volume level.
1. Short press will quickly mute the speaker, and
LCD displays VOL:MT
2. Press again, the volume will resume to
previous volume level setting.
PTT
Squelch control ( 1-28 Levels, Default Level 6)
1. Choose a channel which is not busy.
2. Short Press SQ/VOL key repeatedly until LCD
displays SQ: XX
XX stands for Squelch level.
3. Short press or key to choose desired
squelch level.
4. Hold or results in faster adjustment of squelch level.
5. Short press key until the noise just appears, then short press until the noise
just disappears the squelch level setup is done.
The higher the squelch level selected, the stronger signal required to open the speaker and
hear.
Tabla de contenidos
Otros manuales de Transceptor de Stryker
Stryker
Stryker SR-490HP Manual de usuario
Stryker
Stryker SR440-HP Manual de usuario
Stryker
Stryker SR-655HPC Manual de usuario
Stryker
Stryker SR-497hpc Manual de usuario
Stryker
Stryker SR-477HPC2 Manual de usuario
Stryker
Stryker SR-447HPC2 Manual de usuario
Stryker
Stryker SR-25MC Manual de usuario
Stryker
Stryker SR-955HPC Manual de usuario
