
6
The Main Body goes over the strings and houses
the adjusters.
The Side Screw allows you to adjust the height of
the main body over the strings of the guitar. More
precise tuning is done with the adjusters for each
dampener on the main body.
The Adjusters are turned to lower and raise the
dampeners.
The Dampeners are lowered so that they come
into contact with the strings. When contact is
made, the fabric alters the timbre of the strings to
give it a banjo twang.
The Mounting Base is used to attach the entire
unit to the body of the guitar and contains the
microsuction material underneath.
The Microsuction Material has thousands of
microscopic air pockets that create partial
vacuums between the material and the body of
the guitar without leaving sticky residue when
removed.