BATTERY INSTALLATION/REMOVAL
- Unscrew the tail cap (remove depleted batteries)
- Insert the 18650 Li-ion battery (B.A.M.F.F. 6.0 or 8.0 models) or three AAA alkaline batteries inside the AAA carrier
with the positive side (+) toward the light’s head,
- Screw the tail cap back on.
USAGE AND MAINTENANCE
Please do not disassemble the sealed head, doing so can cause damage to the flashlight and will void the warranty.
We recommend the use of high quality batteries. If the flashlight is not to be used for an extended period of time,
remove the battery, or the flashlight could be damaged by electrolyte leakage or battery explosion.
The O-ring may be worn out after using the flashlight for a long time. If this happens, please replace the O-ring with
a new one to keep the flashlight properly sealed against water.
Please clean the contacts of your flashlight from time to time, especially if the light flickers or doesn’t light up. There
may be several reasons for a flickering or not working light.
Reason A: The battery needs replacing.
Solution: Replace the battery (please confirm the correct orientation of the positive and negative ends)
Reason B: The threads, PC Board contact or other contacts are dirty.
Solution: Clean the contact points with an alcohol soaked cotton swab.
If the above methods don’t work. Please refer to the warranty policy.
PRODUCT WARRANTY
We will repair or replace products with manufacturing defects within 1 year of purchase with normal use, proof of
purchase required. Please visit strikerconcepts.com for warranty policy and contact information.
WARNING
The B.A.M.F.F. is a high intensity lighting device capable of causing eye damage. Avoid shining the light directly into
anyone’s eyes.
Striker Concepts
Mooresville, NC 28115
Warning
1. Please do not mix old and new batteries and do not mix batteries of different brands, size, capacity or type
(standard alkaline (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.)). Doing so may cause damage to the flashlight
or the batteries being used.
2. Do not use the supplied 18650 charger to charge other battery types or may cause explosion.
* 18650 Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and
handled with care. Quality batteries with circuit protection will reduce the potential risk for combustion or explosion
but cell damage or short circuiting are potential risks the user assumes.
** The B.A.M.F.F. can be powered using two CR123A lithium batteries for emergency situations, but the circuitry is
not designed for the additional voltage. Usage of this battery will result in a shortened lifespan and void the warranty.
BATTERY OPTIONS
Type Dimensions Nominal Voltage Usability
18650 Rechargeable
(Li-ion) 18650 3.7V Yes
(recommended for optimal performance)
Non-rechargeable
Battery (Alkaline) AAA 1.5V Yes
(expect lower runtimes & light performance)
Non-rechargeable
Battery (Lithium) CR123A 3V Caution**
(not recommended)
