1
w w w . a u t o m a t i o n d i r e c t . c o m
1 - 8 0 0 - 6 3 3 - 0 4 0 5
STRIDE™INDUSTRIAL UNMANAGED ETHERNET
MEDIA CONVERTERS – DATA SHEET
3505 HUTCHINSON ROAD
CUMMING, GA 30040-5860, USA
Desc iption:
STRIDE SlimLine Industrial Unmanaged Ethernet copper to Fiber
Converter with one 10/100BaseT auto-detecting, auto-crossover and
auto-polarity J45 Ethernet Port and one 100BaseFX Fiber Optic Port
(multimode fiber connector for links up to 4km, ST or SC type
connector depending on model). edundant power inputs with surge
and spike protection. DIN rail mounting. Supports store & forward
wire speed switching and full-duplex with flow control. UL, CSA
(CUL), & CE
NNOOEE::DIMENSIONS, INS ALLA ION AND WIRING INFORMA ION IS
SHOWN ON HE BACK OF HIS DA A SHEE .
SE-MC2U-ST
Copper RJ45 ort: (10/100BaseT)
10/100BaseT ports Shielded RJ45
Protocols supporte All standard EEE 802.3
Ethernet compliancy EEE 802.3, 802.3u, 802.3x
Auto-crossover Yes, allows you to use straight-through or crossover wired cables
Auto-sensing operation Yes, Full and half duplex
Auto-negotiating Yes, 10BaseT and 100BaseT
Auto-polarity Yes, on the TD and RD pair
Flow control Automatic
Ethernet isolation 1500 VRMS 1 minute
Plug an play Yes
Cable requirements Twisted pair (Cat. 5 or better) (shielded recommended)
Max. cable istance 100 meters
Fiber ort: (100BaseFX multimode)
100BaseFX ports 1
Fiber port mo e Multimode (mm)
Fiber port connector ST - model SE-MC2U-ST
SC - model SE-MC2U-SC
Optimal fiber cable 50/125 or 62.5/125 µm
Center wavelength 1300 nm
Multimo e
Links up to 4 km typ.; 1300 nm; use with 50 or 62.5/125 um fiber
> Transmitter power (dB): -21 min, -17 typ, -14 max
> Receiver sensitivity (dB): -34 typ, -31 max
Nominal max. istance
(full uplex) 4 km
Half an full uplex Full duplex
Ethernet compliance 100BaseFX
Eye safety (laser) EC 60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11
General Specifications
Ethernet switch type 2 ports
Operating mo e Store and forward wire speed switching, non-blocking
Devices supporte All EEE 802.3 compliant devices are supported
Stan ar s EEE 802.3, 802.3u, 802.3x
MAC a resses 1024 addresses
Memory ban wi th 3.2 Gbps
Latency for
10 Mbps ports 16 us + frame time (typical)
Latency for
100 Mbps ports 5 us + frame time (typical)
Power input Redundant nput Terminals
Input power
(typical with all ports
active at 100 Mbps)
2.0 W
Input voltage 10-30 VDC (continuous) - Class 2 Power Supply
Reverse power protection Yes
Transient protection 15,000 watts peak
Spike protection 5,000 watts (10x for 10 uS)
Ethernet isolation 1500 VRMS 1 minute
Operating temperature range -10 to +60 °C (+14 to +140 °F),
cold startup at -10 °C (+14 °F)
Storage temperature range -40 to +85 °C (-40 to +185 °F)
Humi ity
(non-con ensing) 5 to 95% RH
Environmental Air No corrosive gasses permitted
Vibration, shock & freefall EC68-2-6, -27, -32
Agency Approvals
UL/cUL 508, CSA C22 per EN61010-1,
UL/cUL 1604 (Class 1, Div. 2, Groups A, B, C, D),
CSA C 22.2/213 9 per EN50021/EN60079-15
(Zone 2, Category 3), CE (ATEX)
EMI emissions FCC part 15, CES-003, EN55022
EMC immunity EC61326-1
Hazar ous locations UL1604, CSA C22.2/213 (Class , Div.2) (file #E200031);
EN50021/EN60079-15 (Zone2)
RoHS an WEEE RoHS (Pb free) and WEEE compliant
Packaging an protection UL94VO Lexan, P30
Dimensions (L x W x H) See mechanical diagrams for details
Weight 4 oz (0.11 kg)
Safety Standa ds:
Electrical Safety European
Directives US Emissions
WEEE Compliant RoHS Compliant
RoHS
NNOOEE::FOR ADDI ONAL PRODUC DE AILS, A USER MANUAL,
SE-USER-M, IS AVAILABLE AS A DOWNLAODABLE PDF FILE FROM HE
ONLINE DOCUMEN A ION AREA OF HE AAUUOOMMAAIIOONNDDIIRREECCWEBSI E.
SE-MC2U-SC
