Stricker Lipo Smart Series Manual de usuario

Additional User Manual

R&E Stricker Reha-Entwicklungen GmbH

Model series

Lipo Smart

Smart Wild

This additional operating manual for the Lipo Smart and Smart Wild model series

supplements the general operating manual for the City, Ultra, Sport, Neodrives, Lipo

Smart and Smart Wild model series.

Manufacturer

R&E Stricker Reha-Entwicklungen GmbH

Klotzberg 64

D-77815 Bühl

Phone: +49 7223/72510

Fax: +49 7223 / 74947

Email: [email protected]

Web: www.stricker-handbikes.de

Subject to misprints, mistakes and price or product changes. Product changes include changes that result from the

further development of the mechanics, the software or the legal requirements.

Date: 10. June 2021

®R&E Stricker Reha-Entwicklungen GmbH , Bühl

Reprinting, even in part, only with the written permission ofR&E Stricker Reha-Entwicklungen GmbH , Bühl.

Notice to reader

For reasons of readability, the masculine form has been chosen in these instructions for use, nonetheless

the information relates to members of all genders.

R&E Stricker Reha-Entwicklungen GmbH

Additional instructions for use Lipo Smart, Smart Wild

Inhalt

1 Declaration of Conformity ..................................................................................................................2

2 Introductory Notes .............................................................................................................................2

3 Note on the general instructions for use.............................................................................................2

4 Product description & intended use....................................................................................................2

5 Safety and driving instructions for accident prevention ......................................................................3

5.1 Battery and charger safety instructions ....................................................................................................3

6 Operation ...........................................................................................................................................4

6.1 Lipo Smart range.........................................................................................................................................5

6.2 Smart Wild range.........................................................................................................................................8

7 Battery and charger..........................................................................................................................12

7.1 Charging the battery................................................................................................................................. 12

7.2 Equipment................................................................................................................................................. 12

7.3 Attachment of the battery........................................................................................................................ 12

7.4 Storage...................................................................................................................................................... 13

8 Repair, cleaning and maintenance ....................................................................................................13

8.1 Changing the wheels................................................................................................................................ 13

8.2 Pin assignment......................................................................................................................................... 13

9 Transport .........................................................................................................................................13

9.1 Transport in the vehicle ........................................................................................................................... 14

9.2 Transport by plane ................................................................................................................................... 14

10 Disposal and recycling .....................................................................................................................14

11 Warranty and guarantee ...................................................................................................................14

12 Liability ............................................................................................................................................14

Attachment ............................................................................................................................................16

A Technical data Lipo Smart....................................................................................................................... 16

B Technical data Smart Wild ...................................................................................................................... 17

R&E Stricker Reha-Entwicklungen GmbH

Additional instructions for use Lipo Smart, Smart Wild

Declaration of Conformity

1 Declaration of Conformity

The device complies with the current standards and guidelines of the EU. We certify

this in the EC declaration of conformity. If required, we will be happy to send you the

corresponding declaration of conformity. Our power assist devices have been tested by

means of an electromagnetic compatibility test (EMC).

In the event of a change not agreed with R&E Stricker GmbH, this declaration loses its validity.

MDR: We conrm that our products (electric power assist devices and hand-operated wheelchair assist

devices - Stricker Handbikes) comply with the essential requirements according to the new regulation

(EU) 2017/745 (MDR) or the Medical Devices Act. The documentation of the production is available at

the company R&E Stricker Reha-Entwicklungen GmbH. R&E Stricker Reha-Entwicklungen GmbH holds full

responsibility for the issuance of the declaration of conformity.

2 Introductory Notes

WARNING

Please read these operating instructions and all other operating instructions supplied with the handbike

carefully and observe them before using the handbike.

WARNING

Visually impaired people or people with cognitive impairments must have the information material and

the instructions for use read out to them by assistants. Corresponding documents are available on our

website www.stricker-handbikes.de on the Internet. Videos and photos are also available there.

DEALER NOTICE

Be sure to hand over these operating instructions to every customer when handing over the handbike and

expressly draw the customer‘s attention to the safety and hazard information.

Never deliver a handbike without an instruction manual!

3 Note on the general instructions for use

WARNING

These are the additional instructions for use for handbikes of the Lipo Smart model series. It supplements

the general operating instructions for the City, Ultra, Sport, Neodrives and Lipo Smart model series. It is

essential that you read both instructions for use before using the handbike.

4 Product description & intended use

The handbike is coupled to a manual wheelchair as an electrically assisted, manual pulling aid. This

allows the driver to be supported in his mobility. The aim is to expand the radius of action by allowing

longer distances to be covered more easily and independently. Coupling the handbike creates a

three-wheeled vehicle with three relatively large wheels. The handbike therefore improves the driving

characteristics on uneven surfaces. Obstacles can also be overcome more easily. Downhill and uphill

driving is safer thanks to the additional braking systems. The driver can independently couple the

handbike to the wheelchair and detach it from the wheelchair. The wheelchair as such is not changed and

its properties are fully retained.

R&E Stricker Reha-Entwicklungen GmbH

Additional instructions for use Lipo Smart, Smart Wild

Safety and driving instructions for accident prevention

5 Safety and driving

instructions for accident

prevention

WARNING

These notes are for your own safety. Please read

these carefully before using the handbike and

observe the instructions! Failure to follow the

instructions for use could result in damage to the

product

and serious personal injury. We do not accept any

liability for damage caused by disregarding the

instructions for use.

NOTE

Observe all safety and hazard notices and

instructions, both in this and in all other

instructions for use supplied.

5.1 Battery and charger safety

instructions

WARNING

Before carrying out repair, cleaning or

maintenance tasks on the handbike, switch off the

electrical components and remove the batteries

from the handbike.

The supplied batteries are only used to operate

the drive systems of the handbike. Do not connect

other systems to the battery. Any use beyond that

requires the written approval of the manufacturer.

All information corresponds to the state of the art

at the time of printing. Cases of abuse include:

• Use of the battery contrary to the description

and information in the instructions for use

• Use of the battery when the technical

performance limits are exceeded

• Technical modication of the battery

• Modication of the battery software

• Use of the battery to power other systems

We assume no liability for damage in the event of

misuse.

HEALTH ADVICE

If you come into contact with escaping gases,

supply fresh air. In case of body contact with

battery uids, rinse the affected part of the body

with plenty of water. Consult a doctor in the

event of contact with mucous membranes or

symptoms.

5.1.1 Operation

Make sure that the batteries are rmly seated in

the holders provided and that the batteries are

locked. This is especially true if you have removed

the batteries from the towing device before

charging.

Pay attention to the battery temperature on the

display during extreme mountain drives. The

temperature must not exceed 45 °C. To prevent

overheating, take a break in operation to relieve

the batteries.

Only operate the battery in ambient temperatures

between -20 °C and 50 °C. Operation outside the

temperature range shortens the service life of the

battery and carries the risk of ignition.

Do not subject the battery to shock. If the

battery has been dropped or has been hit, the

battery must be checked by the manufacturer.

Please contact your specialist dealer or the

manufacturer regarding the return and repair /

disposal procedure. This also applies to otherwise

damaged or defective batteries. Do not continue to

use a damaged or defective battery. Do not open

the battery yourself.

Keep the battery dry and clean. Protect the

battery against the ingress of moisture or foreign

particles. Do not connect the contacts of the

battery with metallic or other conductive objects.

Keep the battery away from small metallic objects

such as screws, coins, paper clips, keys or the like

to avoid a short circuit. Only clean dirty contacts

with a dry, clean cloth. Do not immerse the battery

in water.

If you nd that the battery is overheating, leaking,

smoking, emitting an unusual odor, or becoming

deformed, immediately stop using the battery and

turn off the battery.

Protect the battery from heat and open ames

(radiators, microwaves, ovens, strong sunlight).

Exposure to heat can cause ignition and explosion.

R&E Stricker Reha-Entwicklungen GmbH

Additional instructions for use Lipo Smart, Smart Wild

Operation

Do not open the case of the battery. Do not

disassemble the battery. Damage to the battery

cells or contact with oxygen can lead to re and

explosion. Opening the battery voids the warranty.

FIRE FIGHTING

Do not attempt to extinguish lithium-ion batteries

with water or other liquids in the event of a re.

Battery cell manufacturers recommend sand as

the only extinguishing agent. There is a risk of

explosion in a re.

Extinguish lead-gel batteries with water, foam or

CO2. In the event of a re with lead-gel batteries,

dangerous gases can be formed. Under no

circumstances should you inhale the gases.

5.1.2 Charging process

WARNING

Do not leave the battery unattended while

charging.

Only charge the battery at temperatures between

0 and 40 °C. A charging process outside the

temperature range is automatically canceled by

the battery. To optimize the service life, charge the

battery at temperatures of 10-30 °C.

Charge the battery in a sufciently ventilated,

dry and dust-free environment. Make sure there

is sufcient air circulation during the charging

process.

Do not charge the battery in the vicinity of

ammable substances (solids, liquids, gases).

Protect the battery from moisture when charging.

Do not charge the battery in areas where water

could condense on the battery or charger. Only

use the charger when it is completely dry. If

condensation has formed, let the charger dry

completely before charging.

Only use the charger supplied to charge the

battery. Using any other charger could result in

malfunction, damage, defect, ignition or explosion.

Do not charge the battery with a defective charger.

Replace a defective charger immediately.

Do not use a charger that has been shocked

or dropped. Do not open or repair the charger

yourself.

Do not charge damaged batteries.

Avoid unnecessary charging and do not charge the

battery for long periods of time when you are not

using it.

The battery will automatically stop charging as

soon as the battery is fully charged. When the

charging process is complete, rst disconnect the

charger from the mains socket and then from the

battery.

Do not carry the charger by the power cord or the

charging cable. Do not pull on the power cord to

disconnect the charger from the power outlet. Do

not apply pressure to the cables and connectors

or pinch them. There is a risk of electric shock or

ignition.

Position the charger so that nobody can step on or

trip over the cable or charger. Protect the charger

and all associated components from other harmful

inuences or loads.

5.1.3 Storage

Do not store the batteries in places that will be

exposed to heat for a long time (sunlit car trunk,

garden shed, etc.). The service life of the battery

depends, among other things, on the storage

conditions.

Use your car only for transport, not for storing or

keeping the battery.

For an optimal service life, store the battery at

18-23 °C and a maximum humidity of 80%. Do not

expose the battery to moisture (rain, snow, etc.)

when storing it.

Before storing, charge the battery according

to the specications of the respective battery

(“7.4 storage”). Check the charge level at least

every three months and recharge the battery if

necessary.

Make sure that the battery is stored protected

from damage and unauthorized access.

Store the battery out of the reach of children.

6 Operation

WARNING

Switch off the battery when connecting or

disconnecting the wheelchair and maneuvering or

alternatively turn the speed control on the handle

to 0 to prevent unintentional driving off when

moving the cranks.

R&E Stricker Reha-Entwicklungen GmbH

Additional instructions for use Lipo Smart, Smart Wild

Operation

6.1 Lipo Smart range

6.1.1 Before driving

NOTE

Unpacking and installation video can be found on

www.stricker-handbikes.de/installationsupport

WARNING

Always remove the key for the key switch when

parking the power assist device in order to

prevent unauthorized use of the device.

Switch on the battery with the main switch on the

battery (Fig. 1). You can tell that the battery is on

when the lamp on the battery is on.

Turn the key switch with the key to the position

“ON” (Fig. 2). Remove the key and stow it securely

so as not to lose it while driving.

Fig. 1: Battery

Fig. 2: Lipo Smart control unit position “ON”

6.1.2 Lipo Smart Para

On the left ergonomic handle you will nd the

thumb throttle for speed control above the grip

surface. With the thumb throttle you can drive 6

or 25 km / h, depending on the version, without

assistance from cranking. If you start to crank,

the thumb throttle will be deactivated. You can

now set the speed using the controller on the

handle. The handbike then moves at the set speed

regardless of how hard you crank.

The brake lever on the left ergonomic handle

automatically interrupts the drive electronics when

pressed. You can therefore not operate the left

brake lever and accelerate with the thumb throttle

at the same time. The brake lever also has a

locking mechanism. Use this to use the brake as a

parking brake.

The brake lever on the right ergonomic handle has

no break contact. You can use the right brake lever

to start off on a hill.

Always use both brake levers to brake.

6.1.3 Lipo Smart Tetra

You can adjust the speed using the chin control

knob.

R&E Stricker Reha-Entwicklungen GmbH

Additional instructions for use Lipo Smart, Smart Wild

Operation

To make starting easier, press the traction

help button for one second. The handbike then

supports the start-up process for two seconds

with the preset speed setting.

The Lipo Smart has a coaster brake. Activate this

by turning the handbike cranks backwards. The

exact function of the coaster brake is explained in

the general operating instructions in chapter “12.1

Coaster brake”.

If your Lipo Smart Tetra is equipped with thumb

throttle in addition to the speed regulator for chin

operation, this works according to “6.1.2 Lipo

Smart Para”.

6.1.4 Starting on the mountain

If you have stopped on an incline and want to start

again, you may roll backwards and not be able to

start off. In order to be able to start off despite an

incline, lean forward to put more weight on the

front wheel. Press and hold the left brake lever.

Now slowly accelerate at the same time. Reduce

the pressure on the brakes as you slowly increase

the throttle. As soon as you notice that you are

moving in the direction of travel, you can let go of

the brake completely.

6.1.5 Display of the charge status

You can check the charge level of the battery at

any time via the LED display. To do this, press the

button on the top of the battery. The charge level

is also shown on the left display.

6.1.6 After driving

Turn the speed control on the handle to 0 to

prevent unintentional starting when moving the

cranks.

Turn the key switch with the key to the position

“OFF” (Fig. 3). Remove the key and store it

securely.

Switch off the battery using the main switch on the

battery (Fig. 1). You can tell that the battery is off

when the lamp on the battery goes out.

Fig. 3: Lipo Smart control unit position “OFF”

6.1.7 Special equipment: 2 Lipo

batteries with 2 switches

With this special equipment for the Lipo Smart you

get a power assist device with two batteries on

the fork and a control box with two coupled toggle

switches. The standard battery holder above is not

required with this equipment.

You cannot operate the two batteries in parallel.

Use the two switches to switch the batteries and

the display. Always switch both switches at the

same time. Make sure that both switches are in the

same position at all times.

R&E Stricker Reha-Entwicklungen GmbH

Additional instructions for use Lipo Smart, Smart Wild

Operation

Fig. 4: Left battery switched on

Fig. 5: Right battery switched on

6.1.8 Special equipment: 3 Lipo

batteries with 4 switches

With this special equipment for the Lipo Smart

you get a power assist device with two additional

batteries on the fork and a control box with four

toggle switches.

You cannot operate the batteries in parallel. With

the two left switches you switch the batteries and

the display from left to right or vice versa. With

the two right switches you switch the operation

from the standard battery to the batteries on the

fork or vice versa. Always switch two switches at

the same time. Make sure that the left and right

switches are in the same position at all times.

Fig. 6: Battery turned on at the top

R&E Stricker Reha-Entwicklungen GmbH

Additional instructions for use Lipo Smart, Smart Wild

Operation

Fig. 7: Battery switched on at the bottom left

Fig. 8: Battery switched on in the lower right corner

6.2 Smart Wild range

6.2.1 Before drving

WARNING

When parking the handbike, always remove the

key for the key switch to prevent unauthorized

use of the device. Before starting the ride, make

sure that the battery is properly engaged and

locked. Remove the key and store it securely to

prevent the key from interfering with the chain or

opening the lock while driving. Otherwise you risk

loosening the battery while driving.

Slide the battery onto the holder from above and

lock it with the key. You can check the charge level

via the charge level indicator on the battery (Fig. 9)

check.

Fig. 9: Battery charge level indicator

Turn on the battery with the main switch on the

battery (Fig. 10). Rotate the Key switch with the

key in the Position “ON” (Fig. 11). You can only

remove the key from the control unit when it is

switched off. Close the closure of the charging and

USB ports so that no dirt and water can get in. The

USB port is not intended for charging USB devices.

Please use the USB port on the display for charging

USB devices.

Otros manuales para Lipo Smart Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Bicicleta de Stricker

Stricker

Stricker Lipo Lomo V16/4 Manual de usuario

Stricker

Stricker Neodrives Instrucciones de funcionamiento

Stricker

Stricker Lipo Smart Series Instrucciones de funcionamiento

Stricker

Stricker CITY 7 Manual de usuario

Stricker

Stricker Lipo Smart Series Instrucciones de funcionamiento

Stricker

Stricker Lipo Smart Para Manual de usuario

Stricker

Stricker City Manual de usuario

Manuales populares de Bicicleta de otras marcas

RAMBO

RAMBO R1000X2M-FF-BFD Manual de usuario

Vermeiren

Vermeiren SAFARI Manual de usuario

Velec

Velec A2/36V Manual de usuario

Coswheel

Coswheel A-ONE Manual de usuario

Betzold

Betzold 97869 Manual de usuario

Cervélo

Cervélo S3 2019 Manual de usuario

Tenways

Tenways AGO X Manual de usuario

Festo

Festo EGSC-BS-KF Manual de lista de piezas

Gio Electric

Gio Electric H1 Volt Manual de usuario

GOGOBEST

GOGOBEST GM30 Manual de usuario

DAHON

DAHON CIAO - 2009 Manual de usuario

Aprimatic

Aprimatic ONDA 500 Guía de inicio rápido

MV Agusta

MV Agusta Lucky Explorer GRAVEL Manual de instrucciones

Greyp

Greyp G6 Series Manual de usuario

Babboe

Babboe Carve-E Manual de usuario

Huka

Huka orthros Manual de usuario

Xtracycle

Xtracycle Stoker 2021 Manual de usuario

APRILIA

APRILIA DORSODURO 750 ABS 2015 Manual de usuario