G-sensor
When the Dash Cam is recording, and if the vehicle is involved in an incident/impact the video file will be
automatically saved, and will not be deleted by the loop recording - the file name will begin “EVE”
Emergency lock
When recording, if required short press the on/off key, to lock a file manually, the video file will be automatically
saved, and will not be deleted by the loop recording - the file name will begin “SOS”
Photo taking
(1) Short press on/off key to start the Dash Cam and press OK key to stop recording.
(2) Short press on/off key to enter the photo U:king model.
(3) Press confirm key to take photo.
Review and delete files
(1) Turn on Dash Cam and press OK key to stop recording.
(2) Short press on/off key twice to enter play back mode.
(3) Press UP key or DOWN key to choose the recorded file and press OK key to play back or review,
(4) If deleting files, press MENU key after stopping playing files then enter Delete mode
(5) Press UP key or DOWN key to choose the file to delete or format;
(6) Continue pressing MODE key and close the operation.
Menu function setting
(1) Turn on Dash Cam and stop recording, press MENU key and enter the settings menu interface.
(2) Press UP key or DOWN key to select the specific parameters.
(3) Press Confirm key to confirm each selection.
(4) When all the setting have been set, press Menu key to close the settings interface.
USB mode
Connect the Dash Cam to the computer by the USB cable, and press on/off KEY. USB menu will pop-up
automatically, and there are two models to be selected.
(1). USB-disk - Under this mode, you can save the video files and the photos.
(2). PC camera - Under this mode, USB video equipment will pop-up, now you can take real-time photos or
use as a webcam.
Parking Monitoring
(1). To enter Parking Monitoring mode.
A. Under the normal recording mode, long press the OK button, the P icon appears on the screen.
When the Dash Cam turns off, it will automatically enter the Parking Monitoring mode.
B. If there is a impact on the vehicle, the Dash Cam turns on and automatically records, the screen will display
a key icon, after 30 seconds, the document will be auto saved and the file name will begin with “PART” (this
file will not be deleted when loop recording), the unit will then turn off automatically.
(2). Exit the parking monitoring mode.
Under the recording mode, the screen has a P icon, long press the OK button to exit parking monitoring.
