Stratix EZ-2D Xaminer Manual de instalación y operación

6/17/2015

STRATIX XAMINER EZ-2D BARCODE VERIFIER |

PRODUCT REFERENCE GUIDE (V2.0)

Table of Contents

Chapter 1 Getting Started ...................................................................................................... 2

Unpacking......................................................................................................................................2

System Requirements.....................................................................................................................2

Installing the Verifier......................................................................................................................2

Placing the Barcode Symbol............................................................................................................5

Chapter 2 Using the Verifier................................................................................................... 9

Looking at Data with the Verifier ....................................................................................................9

Commanding the Verifier .............................................................................................................10

Verifier Toolbar Button Commands...............................................................................................11

Symbol Image Window.................................................................................................................13

Symbol Grades Window ...............................................................................................................14

Symbol Statistics Window ............................................................................................................16

Chapter 3 User Preferences Options .................................................................................... 17

Accessing the Parameter Setup Window .......................................................................................17

Symbol Grades Setting .................................................................................................................21

Chapter 4 GS1 Data Structure Validation.............................................................................. 22

GS1 Data Structure Validation Overview .......................................................................................22

GS1 Application Identifier Details .................................................................................................22

GS1 Data Structure.......................................................................................................................23

Chapter 5 Exporting Reports ................................................................................................ 24

Exporting Reports to Excel............................................................................................................24

Exporting Reports to Adobe PDF File.............................................................................................25

Chapter 6 Error Messages .................................................................................................... 28

System Error Messages.................................................................................................................28

Scanner Reset ..............................................................................................................................30

Appendix A: 2D Barcode Samples ........................................................................................ 31

Chapter 1 Getting Started

Unpacking

Before going any further, take a moment to check the contents of the package to ensure your order was shipped

complete. Make sure no items are damaged or omitted. Xaminer eZ-2D verifier package includes:

Carry case

Imager scanner & USB interface cable

Stand

Calibration files CD1

Verifier software and imager scanner driver CD2

Installation guide

Product reference guide

Calibration Check Card

Certificate of Calibration

If any of these items are missing or damaged, please notify Stratix Corporation within two business days of receipt

of your verifier.

System Requirements

Windows® 7 (32 bit/64 bit), Windows® 8 (32 bit/64 bit).

Intel® Core™2 Duo Processor.

2GB of RAM.

USB port 2.0.

Microsoft.NET Framework 4.0 or later

Microsoft Visual C++ 2010 Redistributable Package (x86)

Microsoft Office Excel, Microsoft Internet Explorer.

Adobe Reader.

Installing the Verifier

1. Plug the USB cable modular connector into the cable interface port on the bottom of the imager scanner

handle. See Figure 1-1.

2. Gently tug the cable to ensure the connector is properly secured.

3. Connect the other end of the interface cable to the PC USB port.

4. Place the verifier stand on a flat desk surface.

5. Place the imager scanner into the scanner holder (cup). See Figure 1-2.

Figure 1-1

Figure 1-2

Stand Position & Field of View (FOV)

Stand position 1: Stand position 1 is the primary verification position for most barcodes. The FOV at this position is

1.10” x 1.10”(Figure 1-3 white square), and the maximum barcode size is 1.0” * 1.0”. The minimum X dimension

required for the barcode is 10mils.

Stand position 2: Stand position 2 is used for bigger barcode which the FOV at stand position 1 is too small for the

barcode to be verified. The FOV at stand position 2 is 1.30” x 1.30” (Figure 1-4 white square), and the maximum

barcode size is 1.2” * 1.2”. The minimum X dimension required for the barcode is 15mils.

Note: The illuminated red brackets and the red crosshair on the surface of top plate are the aiming pattern of

imager scanner. The relative position between the crosshair and FOV is useful for better placing the barcode in the

center of the FOV.

Figure 1-3 Stand Position 1 FOV

Figure 1-4 Stand Position 2 FOV

Placing the Barcode Symbol

1. Extract the plunger (Figure 1-5) and move the top plate up or down to stand position 1 or 2, and then

insert the plunger into the hole of that position (Default is stand position 1).

2. Loosen the knob to move down the bottom plate to make enough room for placing the barcode item

between top plate and bottom plate.

3. Place barcode item on the surface of bottom plate, make sure the barcode symbol faces the top plate.

4. Move the bottom plate up once it reaches the top plate.

5. Adjust the barcode position to ensure it is in the center of the FOV.

6. Tighten the knob to make it ready for verifying.

Figure 1-5 (a)

Figure 1-5 (b)

Supported Barcode Symbologies

Stratix Xaminer eZ-2D supports two barcode symbologies: QR Code and Data Matrix (ECC 200).

QR Code: The minimum symbol size is 21X21, and the maximum symbol size is 57X57. See Figure 1-6.

Data Matrix: The minimum symbol size is 10X10, and the maximum symbol size is 52X52. See Figure 1-7.

Figure 1-6(a) Figure 1-6(b)

Figure 1-7(a) Figure 1-7(b)

Opening Verifier Software

To open Stratix Xaminer eZ-2D, click the Stratix Xaminer eZ-2D icon (Figure 1- 8) on your desktop, or open the

Start Menu and click on All Programs->Stratix Corporation->Stratix Xaminer eZ-2D.exe (Figure 1-9)., the main

user interface will open.

Figure 1-8

Figure 1-9

Chapter 2 Using the Verifier

Looking at Data with the Verifier

The first time you open Stratix Xaminer eZ-2D you will see the three data windows shown below (Figure 2-1).

Verification reports are displayed in these windows (Figure 2-2) by commanding the Stratix Xaminer eZ-2D to scan

barcode using this interface.

Figure 2-1

Tabla de contenidos

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario

Stratix eZ-2D Xaminer Manual de instalación y operación

Manuales populares de Lector de código de barras de otras marcas