STOVES SXS905 SS Manual de usuario
SXS905 SS
SXS905 BLK
08xxxx
CONTENTS
Safety Warnings
Electrical Safety
Transportation and Handling
Installing and Switching on Your Appliance
Door Height Adjustment
Before Switching On
Your Appliance and the Compartments
Adjusting the Temperatures and Functions
Shelving and rack adjustment
Bulb Replacement
Power Failure
Maintenance & Cleaning
Internal Cleaning
External Cleaning
When the appliance is not in use
Defrosting
Trouble shooting
1
2
2
2
3
3
4
5~8
9
9
9
Installation Instructions for External Filter 10
Freezer Storage Advice 11
11
12
12
12
12
12
13~14
Energy Saving Advice 11
Safety warnings
Important note: Please read this booklet before installing and switching on this
appliance. The manufacturer assumes no responsibility for incorrect installation
and usage as described in this booklet.
•
is known as R600a(Isobutene) and is environmentally friendly but can be
combustible. Care should therefore be taken when handling or transporting
the product to ensure that none of the refrigeration circuit components are
damaged,
•Do not obstruct ventilation openings in the appliance.
•The appliance must not be placed or rested on its power cord.
•Do not use mechanical devices or other artificial means to accelerate the
defrosting process, such as a heater or a hair dryer.
•Do not use electrical appliances in the refrigerator compartment of the
appliance.
•If this appliance is to replace an old refrigerator with a lock, the lock must
be removed as a safety measure before storing it or disposing of it. This is to
protect children from locking themselves inside the appliance.
•Old refrigerators and freezers contain insulation gases and refrigerant, they
must be disposed of properly. Contact your local authority or your dealer if
you have any questions. Please ensure that you do not damage the scrap unit
prior to being picked-up by the relevant waste disposal service.
•Do not use adaptors or extension leads when connecting the appliance to the
electrical power supply.
•Do not plug in damaged plugs.
•Do not pull, twist or damage the power cable.
•Do not plug-in or un-plug the appliance with wet hands to prevent electrical
shock.
•This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children should not play with the appliance.
•This appliance is designed to be used by adults, do not allow children to play
with the appliance or let them hang over the door.
•Do not place explosive or flammable material in your appliance for your own
safety.
•Bottles containing a high percentage of alcohol must be sealed well and placed
vertically in the refrigerator.
•Do not cover the body or the top of the appliance.
•Fix down the accessories in the appliance during transportation to prevent
damage to them.
This model uses natural refrigerant gas as part of its cooling system. This gas
1
Electrical Safety
THIS APPLIANCE MUST BE PLUGGED INTO AN EARTHED SOCKET
•Before switching on, make sure that the voltage of your electricity supply is the
same as that indicated on the rating plate. This product is designed to operate
on 220 –240V AC; 50Hz. Connection to any other power source may damage the
unit.
•This product may be fitted with a non re-wireable plug. If it is necessary to change
the fuse in the plug, the fuse cover must be refitted. If the fuse cover becomes
lost or damaged, the plug must not be used until a suitable replacement is
obtained.
•If the plug has to be changed because it is not suitable for your socket, or
becomes damaged in any way, it should be cut off and an appropriate plug fitted
following the wiring instructions. This should be carried out by a qualified
electrician. The plug removed must be disposed of safely, as insertion into a 13
Amp socket is likely to cause an electrical hazard.
For safe lifting, tilt the appliance backwards by no more than 45 degrees, hold the
base and rear corners of cabinet. Lift the refrigerator carefully. Never use the door
handles for lifting. To move the refrigerator on a flat level surface, tilt it slightly
backwards and push backwards.
This unit is heavy and could cause injury –ensure there are adequate people
present to move the appliance.
Transportation and Handling
•Operating voltage for your appliance is 220-240V at 50Hz.
•Before plugging in the power supply, ensure that the voltage on the rating label
corresponds to the working voltage of your electrical system in your home.
•Insert the plug into an efficient Ground(Earth) connection. If the socket has no
Ground(Earth)contact or the plug does not match, we suggest you call an
authorised electrician for assistance.
•Place your appliance in an area that is not exposed to direct sunlight.
•Your appliance should be placed at least 10cm away from stoves, ovens and
other heating cores.
•This appliance should never be used outdoors or left in the rain.
•When your appliance is placed next to a chest freezer or freezer, there should
be at least 10cms between them to prevent humidity on the outer surface.
•Do not place anything on your appliance and install the unit in a suitable place
so that there is at least 30cm clearance above the appliance.
•If placing your appliance next to kitchen cabinets,leave10cm between them.
•The rear of the appliance should be at least 7.5cm away from the backwall.
•The appliance must be used in the vertical position and on a flat surface.
•To level the appliance, use the adjustable feet on the appliance.
•Do not place your appliance on a carpeted surface as this will prevent adequate
ventilation.
•This appliance should only be placed on a flat, firm surface.
•Choose a dry and well-ventilated space.
•The appliance should be positioned so that the plug is easily accessible.
Installingand Switching on Your Appliance
2
Before Switching On
•Before using your appliance, add a teaspoon of bicarbonate of soda to warm
water and with a damp cloth wipe down all parts of the new appliance, then
repeat the process with a clean damp cloth and dry(ensure the appliance is not
connected to the power when performing this task).
•Remove all transport tapes and foam protection pieces . Clean the interior with
a cloth dampened in lukewarm soap and water. Wipe with clean water and wipe
dry.
•There may be an odour when you first switch on the appliance, it will disappear
when the appliance starts to cool.
•When the appliance has been positioned, adjust the feet to ensure the unit is
stable. This is essential to ensure quiet running and proper door opening /
closing.
•Connect to the electrical socket but do not switch the power to the refrigerator
on for at least 3 hours. The coolant within the product needs time to settle after
it has been transported and put in to position, failure to do this will affect the
cooling performance of your appliance.
•Once the appliance has settled switch on the power, the compressor will begin
to work. Locate the control panel and set the temperature of the fridge
compartment to 4°C and the freezer compartment to -18°C. Close the door
•You may hear faint gurgling or bubbling sounds when the refrigerant is pumped
to the cooling system and through the coils or tubing at the rear of the appliance.
When the compressor is in operation you may hear a slight whirring sound or
pulsating noise. The thermostat controls the operation of the compressor, and
you may hear a slight click as it cycles in and out (this is normal).
•To save energy, you should minimize the frequency and duration of door opening.
If the doors of the appliance are not aligned then the height of them can be
adjusted, if required please follow the below steps.
Note: The maximum height adjustment is 5mm
Rotate the locking nut clockwise (as shown in the diagram below) with a wrench
for 2 full rotations to loosen it. You can now rotate the adjusting nut(as shown in
diagram below) to raise or lower the height of the door. Once the door is set to
your desired position, then tighten the locking nut by rotating it anti-clockwise.
Door Height Adjustment
Left
Locking nut
Adjusting nut
3
3
5
9
7
2
4
1
88
6
①Freezer door rack
②Freezer compartment glass shelf
③Ice-maker box
④Ice box
⑤Freezer compartment drawer
⑥Refrigerator compartment glass shelf
⑦Vegetable crisper
⑧Refrigerator door rack
⑨Lower cover
When the fridge door is low:
Open the door, use a wrench to rotate the adjusting nut anti-clockwise to raise
the height of the door. Once the doors are aligned, then tighten the locking nut by
rotating it clockwise.
When the fridge door is high:
Open the door, use a wrench to rotate the adjusting nut clockwise to lower the
height of the door. Once the doors are aligned, then tighten the locking nutby
rotating it clockwise.
Your ApplianceandtheCompartments
4
5
Adjusting the Temperatures and Functions
6
7
8
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Refrigerador de STOVES
STOVES
STOVES ST980SXS Manual de usuario
STOVES
STOVES ST SXS909WTD Sta Manual de usuario
STOVES
STOVES ST INT70FF Manual de usuario
STOVES
STOVES ST NF60189WTDSta Manual de usuario
STOVES
STOVES 444444331 Manual de usuario
STOVES
STOVES ST NF60189Sta Manual de usuario
STOVES
STOVES SLA 800 Guía
STOVES
STOVES 444444332 Manual de usuario
STOVES
STOVES ST444989 Breeze 190 Red Manual de usuario
STOVES
STOVES FD90B Manual de usuario
