
All the functions below can be performed on the fan touch control
panel, or by using the remote control.
The remote control has a direct line of sight range of approximately
6m.
POWER
• Press the ON/OFF (7) button, to select power on or off.
SPEED
• Press the ON/OFF (7) button, to power on the fan.
• Press the speed button (4) to select the fan speed.
• 3 speeds: (Low - Medium - High )
• The selected speed is indicated on the fan display panel.
OSCILLATION
• Press the ON/OFF (7) button, to power on the fan.
• Press the Oscillation button (6), to select oscillation, the
indicator light on the fan display panel will illuminate.
• To stop oscillation press the button again.
TIMER (0.5 - 7.5 HOURS)
• Press the ON/OFF (7) button, to power on the fan.
• Press the TIMER (3) button, to the desired time period
(0.5-7.5 Hours)
• The selected time is indicated on the fan display panel. For
example, if you have set the timer for 3.5 hours, the 0.5H, 1H
and 2H lights will be illuminated.
• It will now remain operating until the selected time period is
reached.
• Fan then switches off automatically.
• When all the timer lights are off, it means that the time is not set
and the unit will operate continuously until you switch it off
manually.
MODE
• Press the ON/OFF (7) button, to power on the fan. The fan will
operate in Normal mode. The set speed will operate continuously.
There is no light to indicate Normal mode.
• Press the MODE button (5), to select the fan mode.
• 3 modes: (NORMAL / NATURE / SLEEP).
• The default mode is NORMAL, and the NATURE /SLEEP mode will
be indicated on the control panel when selected: NATURE
/ SLEEP.
Please read these
instructions carefully
before use and keep
them in a safe place
for future reference.
Before using the
remote control,
remove the clear
plastic protector
protruding from the
battery comartment of
the remote control.
OPERATING THE FAN
REMOTE
CONTROL
DISPLAY & TOUCH
CONTROL PANEL
6 4
3 5
7
4