stilum Multi-functional trainer basic Manual de usuario
© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • Alle Rechte und Produktmodikationen vorbehalten
Mounting instructions for „Multi-functional trainer basic“
Item-No. 55 1009 401
State: 02.12.2015 p. 1
Diagram 1: Overall view of the tness equipment
© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • Alle Rechte und Produktmodikationen vorbehalten
Mounting instructions for „Multi-functional trainer basic“
Item-No. 55 1009 401
State: 02.12.2015 p. 2
1. Select the tness equipment location in consideration of the required safety
area (see diagramm 3: 5970 x 5890 mm).
2. Carry out excavation work for the foundation anchor as shown in Diagram
2. (1000 x 850 x 550 mm). After excavation, compress the foundation oor.
Note: The tness equipment is built in on the play level.
3. Grout the foundation oor with concrete of quality class B25 up to a
height of appr. 400 mm.
4. After the setting period of 8 -10 days - depending on weather conditions and
foundation size - clean the surface of the foundation, place the pre-mounted
tness equipment onto it and screw the base plate of the tness equipment
onto the foundation anchor with the included heavy-duty dowels.
5. Seal the foundation with the safety cover required for the height of fall indica-
ted.
Critical drop height: about <2000 mm
Recommended surface material: synth. fall protection.
6. Do not allow to use the equipment before the installation has been nished.
1000
65
400
150
850
Kies
Gravel
Beton
Concrete
Erde
Ground
Einbautiefe = 150mm
D
E
F
C
1
2
3
4
B
A
3
2
1
5
C
D
4
6
7
8
A
B
Zust.
Änderung
Datum
Datum
Name
Name
Bearb.
Gepr.
Norm
A3
Bl.
Allgemein-
toleranzen
DIN 7168-m
Maßstab 1:1
28.11.2014
M.Boehm
Multitrainer Basic
0137-00-00-Multitrainer Basic
0137-00-00
Fertigung
E
1x
1000
65
400
150
850
Kies
Gravel
Beton
Concrete
Erde
Ground
Einbautiefe = 150mm
D
E
F
C
1
2
3
4
B
A
3
2
1
5
C
D
4
6
7
8
A
B
Zust.
Änderung
Datum
Datum
Name
Name
Bearb.
Gepr.
Norm
A3
Bl.
Allgemein-
toleranzen
DIN 7168-m
Maßstab 1:1
28.11.2014
M.Boehm
Multitrainer Basic
0137-00-00-Multitrainer Basic
0137-00-00
Fertigung
E
1x
Reinforcement plan: Concrete foundation with rein-
forcement
Main foundation: BSt 500S
Ever 4 stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class B25
Diagram 2: Side view with dimension details
„Multi-functional trainer basic“
© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • Alle Rechte und Produktmodikationen vorbehalten
Mounting instructions for „Multi-functional trainer basic“
Item-No. 55 1009 401
State: 02.12.2015 p. 3
7. Attention: If the tness equipment has been incompletely installed or partly
dismantled when carrying out maintenance and repair work, this may lead to
particular risks of injury for the user. For this reason, make clearly visible that
the equipment shall not be used in such cases.
8. NOTE: Fitness equipment, which contain components made of stainless
steel should not come with „normal“ steel parts in contact. Those steel parts
may rub off and leave small steel particles in combination with moisture
brown rust stains.If such corrosion occur on stainless steel parts, they are
ne with an abrasive (240 grit) to remove.
Please take care when transporting and setting up the fact that the compo-
nents are made of stainless steel with no „normal“ steel parts in contact.
9. The tness information sign has to be arranged outside of the minimum zone
because of the risk of injury.
Diagram 3: Top view „Multi-functional trainer“
2503
2410 2410
5882
5967
2500
Freiefallhöhe=1987
Einbautiefe = 150mm
D
E
F
C
1
2
3
4
B
A
3
2
1
5
C
D
4
6
7
8
A
B
Zust.
Änderung
Datum
Datum
Name
Name
Bearb.
Gepr.
Norm
A3
Bl.
Allgemein-
toleranzen
DIN 7168-m
Maßstab 1:1
28.11.2014
M.Boehm
Multitrainer Basic
0137-00-00-Multitrainer Basic
0137-00-00
Fertigung
E
1x
Extent of the mini-
mum zone = safety
area
© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • Alle Rechte und Produktmodikationen vorbehalten
Mounting instructions for „Multi-functional trainer basic“
Item-No. 55 1009 401
State: 02.12.2015 p. 4
In order to preserve a good visual appearance of your stilum playground equip-
ment over a long period one should take care of maintenance of the stainless
surface even despite of their corrosion resistance.
Especially areas, which can not be reached by rainfall should be frequently clea-
ned from dirt and deposits due to air pollution and dirt caused by the atmosphere.
Light soiling can easily be romoved by using a high pressure cleaner.
For persistent deposits use a clean cloth moistened with a special liquid cleaner
(e.g. on phosphoric acid) and rinse off with clear water after a short application
time. During cleaning with mild abrasive components, only wipe over stainless
steel surface in polishing direction.
For heavily soiled surfaces, polishes can be used (e.g. for cleaning chrome on
cars) or for greasy and oily dirt alcoholic cleaning agents and solvents (e.g. ethyl
alcohol, isopropyl alcohol or acetone).
However, it should be noted that the dissolved soiling is not spread over the sur-
face again.
Do not use any chlorid or hydrochloric containing cleaning products nor scouring
powder, bleaching - or silver polish cleaner. Cleaning intervals depend on type
and degree of soiling as well as on demands made on optical characteristics.
Therefore cleaning is advisable at intervals of six to twelve months – whereby in
the case of strong soiling it is appropriate to clean the playground equipment at
intervals of 3 to six months.
General Information DIN 79000:2012 05_4. 1:
DIN EN1176 species that tness equipment should not be installed in the imme-
diate vicinity of children’s playground equipment. In cases where they are erected
in playgrounds or similar establishments near children’s playground equipment,
they must be separated by adequate distance, fencing or other structural means
from the general play zone.
Movement area DIN 79000:2012-05_4.3.14.4
The free space allowed as movement area must be a minimum of 2.2m. The
movement area must be clear of fences, and observers should not wait in this
space. The space should be free of all objects that the user could fall on and
be injured. E.g. injuries could be caused by posts that are not ush with adja-
cent parts or by protruding footings. In cases where the equipment has a forced
movement, the free area must be extended about 0.5m. Where tness units are
installed on or adjacent to a wall which is at least as high as the exercise space,
the movement area may be reduced. Movement areas of adjacent equipment
may overlap except for equipment with forced movement.
Este manual sirve para los siguientes modelos
1
Otros manuales de Juegos y equipos de juegos infantiles de stilum
stilum
stilum intera 3 Manual de usuario
stilum
stilum Erika Manual de usuario
stilum
stilum Lana Manual de usuario
stilum
stilum Training barrel Manual de usuario
stilum
stilum Rudis Guía del usuario
stilum
stilum Brevi Manual de usuario
stilum
stilum Jump L Manual de usuario
stilum
stilum Labi Especificaciones técnicas
stilum
stilum altus 2 saddle Manual de usuario
stilum
stilum Multiplay gravis 4B Manual de usuario
stilum
stilum Patis 1 Manual de usuario
stilum
stilum sali 4 Manual de usuario
stilum
stilum Gravis 4B Especificaciones técnicas
stilum
stilum collis 2500 Especificaciones técnicas
stilum
stilum lixus Manual de usuario
stilum
stilum caligo rotus Manual de usuario
stilum
stilum libra 4 Robinia Manual de usuario
stilum
stilum caligo rotus Manual de usuario
stilum
stilum navis Manual de usuario
stilum
stilum Motor skills bow cludo Manual de usuario
Manuales populares de Juegos y equipos de juegos infantiles de otras marcas
Ledon
Ledon 302040 Manual de usuario
FUNormous
FUNormous Disney Junior MICKEY MOUSE Manual de usuario
b4Adventure
b4Adventure Slackers TREEZONE ADVENTURE THREE HOUSE Manual de usuario
PoolMaster
PoolMaster 72775 Manual de usuario
Palmako
Palmako 4743142009857 Manual del instalador
BOERPLAY
BOERPLAY PSTE000.019 Manual de usuario
