5
EN
NOTICE
All instructions, warranties and other collateral documents are subject to change at the sole discretion of
STEPCRAFT GmbH & Co. KG. For up-to-date product literature, visit www.stepcraft.us for customers from North America and
Mexico or www.stepcraft-systems.com for customers from the rest of the world.
Meaning of Special Language
The following terms are used throughout the product literature to indicate various levels of potential harm when operating this
product. The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and their explanations,
deserve your careful attention and understanding. The safety warnings themselves do not eliminate any danger. The instructions or
warnings they give are not substitutes for proper accident prevention measures.
Meaning of Special Language
NOTICE Procedures which, if not properly followed, create a possibility of physical property damage AND a little or
no possibility of injury.
Procedures which, if not properly followed, create a probability of physical property damage AND a possibil-
ity of serious injury.
Procedures which, if not properly followed, create a probability of property damage, collateral damage, seri-
ous injury or death OR create a high probability of supercial injury.
Read the ENTIRE instruction manual, to become familiar with the products features and how to operate it.
This includes the entire relevant documentation of the M-Series and all accessories! Failure to operate the
products correctly can result in damage to the products, personal property and cause serious injury, electric
shock and/or re.
Do not attempt disassembly, use with incompatible components or augment product in any way without the
approval of STEPCRAFT GmbH & Co. KG or STEPCRAFT, Inc. This manual contains instructions for safety
and operation. It is essential to read and follow all the instructions and warnings in the manual, prior to
assembly, setup or use, in order to operate correctly and avoid damage or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
Age recommendation: For advanced handcrafters ages 16 and above. This is not a toy.
Should you encounter any doubts or require any further information, please do not hesitate to contact us before com-
missioning of the product. Our contact details can be found on the front page of this manual.
1 General Instructions
1.1 Information and Explanation of used Terminology
These operating instructions explain the STEPCRAFT Tool Magazine and inform you about the correct and safe handling
of the CNC accessory.
This symbol placed next to a construction step indicates a step you can skip in case you don’t own a
STEPCRAFT exhaust adapter. It’s also possible that a grey frame indicates a single sub-step you can skip.
