STEP 1150 Manual de usuario
STEP 1150™
User’s Guide
STEP Communications
625 River Oaks Parkway
San Jose, CA 95134
Tel. 408-474-0272
www.stepcommunications.com
Notices
This User’s Guide is published without warranty as to the Guide, and it
provides no warranty in the referenced product except as provided in the
End User Limited Product Warranty. Improvements and modifications to
this manual, including those necessitated by typographical errors,
inaccuracies or improvements to equipment may be made at any time and
without notice.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications to your device not expressly approved by STEP
Communications Corp. can void the user's authority to operate the
equipment.
BLUETOOTH is a trademark of the Bluetooth SIG, Inc. The Bluetooth
logo and trademarks are owned by Bluetooth SIG, Inc.
STEP 1150 is a trademark of STEP Communications Corporation
Copyright © 2004 STEP Communications Corporation All rights reserved
Part # 9500006-01 rev A
Guidelines for Safe and Efficient Use
•Clean yourheadset with a lightly dampened soft cloth only. Solvents
or other chemicals may damage yourheadset and void your warranty
•Keep your headset away from extreme temperatures, water,
exceptionally high humidity environments, dusty environments, open
flame or fire.
•Do not drop your headset or expose it to severe physical shock or
vibration
•Do not dismantle or attempt to repair yourheadset. If yourheadset
fails, return your headset to your place of purchase for repair or
service
•Do not attempt to ‘pair’ your headset to your phone while driving
•Always use caution when using a cell phone while driving
•Keep yourheadset away from small children as yourheadset contains
small parts that may become detached from the unit and create a
choking hazard
STEP 1150™ INTRODUCTION
What is Bluetooth Wireless
Technology?
Bluetooth™wireless technology makes it possible to connect
compatible communication, computing and other consumer
electronic devices without using cables. The technology is based
on a radio link that offers fast and reliable transmission of
voice and data information. It does not require a line-of-sight
connection in order to establish communication. Bluetooth
wireless technology uses a globally available frequency range
intended to ensure communication compatibility with a wide
variety of devices worldwide.
STEP 1150™ INTRODUCTION
How Can I Use MyHeadset?
You can connect yourSTEP 1150 headsettoyourmobilephone
or PC–or any device with Bluetooth™wirelesstechnologythat
supports the Bluetooth headsetor hands-freeprofileversion1.1or
1.2 – to keep your hands free for more important tasks when
youareattheoffice or in your car. ThisUser’sGuidefocuseson
how to use theheadset with your Bluetooth compatible mobile
phone. When theheadsetisconnectedtoyourmobilephone,you
can use voice control to make calls (if your phone supports this
function). The phone can be tucked away in your pocket or in a
bag. You can handle incoming and outgoingcalls,andadjustthe
volume using the single ‘rocker switch’ on your STEP 1150
headset. Simply rock the multi-functioncontrollerwheel forward
twotimestoincrease thevolumeorbacktwotimestodecreasethe
volume for each incremental level.
STEP 1150™ INTRODUCTION
Contents
Overview ……………………………………….…. 1
Getting Started …... …………………………….…. 2
Features & Controls …………………………….…. 3
Using the Multi-Function Control ………………….. 4
Charging Your Headset …………………………… 5
Charging & LED Status Matrix ……………………. 6
Connecting Your Headset to the Charger ………….. 7
Adjusting Your Headset for Maximum Comfort …… 9
Pairing the Headset to Your Phone ………….…… 13
Resetting the Headset ……………………………. 15
General Operation ……………………………….. 16
(On/Off, volume control, making calls, voice
activated dialing, answering calls, muting calls)
Quick Reference Guide ……………………………23
Troubleshooting ………………………………….. 24
Technical Specifications ……………………………25
End User Limited Product Warranty ……………….26
STEP 1150™
1
Overview
Your STEP 1150 wireless Bluetooth™headset is designed to
provideyouthegreatestdegreeoffreedomandcomfortavailablein
wireless communication. Any device that you want to use with
your STEP 1150 headset has to be compatible with Bluetooth
wireless technology and support theBluetooth headsetorhands-
free profile version 1.1 or 1.2. To be able to use theSTEP
1150 headset together with a mobile phone that does nothave
built-in Bluetooth capability,youwillneedtoconnecttheoptional
STEP BTA-1 wireless Bluetooth adapter to it.
The STEP 1150 can also be used with Bluetooth compatible
PDAs,PCs and other consumer electronic devices that support
the Bluetooth headset or hands-freeprofileversion1.1or1.2or
are compatible with STEP’s optional Bluetooth adaptor.
STEP 1150™
2
Getting Started
Before you use theSTEP 1150headset with a phone or other
device for the first time, you should do the following:
•Charge the headset.
•Decide on which ear you want to wear theheadset (it
can be worn on your right or left ear)
•Pair theheadset with a device, for example, a mobile
phone, PDA or desktop computer.
These processes are described in detail in the pages that follow.
Please register your unit atwww.stepcommunications.com/register
for warrantypurposes. Remembertoalwaysstoreandchargeyour
headset in a safe place when it is not being worn.
STEP 1150™
3
Features & Controls
(note: STEP 1150 available in black or silver)
STEP 1150™
4
Using the Multi-function Control
The multi-function control on the STEP 1150™is used to
perform a variety of functions, including turning theheadseton,
turning theheadsetoff,adjustingthevolume,performingbasicand
advanced call functions and pairing yourheadsettoyourphoneor
Bluetooth device. The control can be rocked forward, rocked
backwards or depressed as shown below.
Tabla de contenidos
