Stelpro STCPW5 Manual de usuario

USER’S GUIDE

STCP

MULTIPLE PROGRAMMING ELECTRONIC

THERMOSTAT FOR HEATING FLOORS

For further information or to consult

this guide online,please visit our website

at www.stelpro.com

INSSTCP5MA0116

If you are viewing this guide online, please note

that this product has been slightly modied since

its introduction. To obtain the guide corresponding

to your model (fabrication date at the back of the

thermostat before January 2016), please contact

customer service.

INSSTCP5MA0116

WARNING

Before installing and operating this product, the owner

and/or installer must read, understand and follow these

instructions and keep them handy for future reference. If

these instructions are not followed, the warranty will be

considered null and void and the manufacturer deems

no further responsibility for this product. Moreover, the

following instructions must be adhered to in order

to avoid personal injuries or property damages,

serious injuries and potentially fatal electric

shocks. All electric connections must be made by a

qualied electrician, according to the electrical and

building codes effective in your region. Do NOT connect

this product to a supply source other than 120 VAC, 208

VAC or 240 VAC, and do not exceed the specied load

limits. Protect the heating system with the appropriate

circuit breaker or fuse. You must regularly clean dirt

accumulations on or in the thermostat. Do NOT use uid

to clean thermostat air vents. Do NOT use where exposed

to water.

Note :

When a part of the product specification must be changed to improve

operability or other functions, priority is given to the product specification

itself. In such instances, the instruction manual may not entirely match all

the functions of the actual product.

Therefore, the actual product and packaging, as well as the name and

illustration, may differ from the manual.

The screen/LCD display shown as an example in this manual may be

different from the actual screen/LCD display.

INSSTCP5MA0116

The STCP electronic thermostat can be used to control heating

oors with electrical current − with a resistive load − ranging

from 0 A to 16 A at 120/208/240 VAC. It has an easy user

interface and can manage up to four programming periods

a day. It keeps the temperature of a room ( mode) and a

oor ( mode) at a requested set point with a high degree

of accuracy.

Floor Mode (factory setting): this control method is ideal

in areas where you want a hot oor at any time and when the

temperature of the ambient air can be high without causing

discomfort. For example, in a bathroom.

Ambient Mode (you only have to press down the A/F

button to switch from one mode to the other): this control

method is ideal when you want a stable ambient air temperature

(without uctuation). Usually, this mode is used in large and

often occupied rooms where temperature variations can be

uncomfortable. For example, in a kitchen, a living room or a

bedroom.

Some factors cause variations in ambient air temperature. They

include large windows (heat losses or gains due to outside

temperature) and other heat sources such as a central heating

system, a replace, etc. In all these cases, the mode will

ensure a uniform temperature.

This thermostat is not compatible with the follow-

ing installations:

• electrical current higher than 16 A with a resistive

load (3840 W @ 240 VAC, 3330 W @ 208 VAC and

1920 W @ 120 VAC);

• inductive load (presence of a contactor or relay); and

• central heating system.

DESCRIPTION

INSSTCP5MA0116

Parts Supplied:

• one (1) thermostat;

• two (2) mounting screws;

• four (4) solderless connectors suitable for copper wires;

• one (1) oor sensor.

Selection of thermostat and sensor location

The thermostat must be mounted on a connection box, at

around 1.5 m (5 feet) above the oor level, on a section of the

wall exempt from pipes or air ducts.

Do not install the thermostat in a location where

temperature measurements could be altered. For

example:

• close to a window, on an external wall, or close to a door

leading outside;

• exposed directly to the light or heat of the Sun, a lamp, a

replace or any other heat source;

• close or in front of an air outlet;

• close to concealed ducts or a chimney; and

• in a location with poor air ow (e.g. behind a door), or with

frequent air drafts (e.g. head of stairs).

To install the sensor, refer to the installation guide of your

heating oor.

Thermostat mounting and connection

1. Cut off power supply on lead wires at the electrical

panel in order to avoid any risk of electric shock;

Ensure that the thermostat will be installed on a

junction box located in an uninsulated wall;

2. Ensure that the air vents of the thermostat are clean and

clear of any obstructions;

INSTALLATION

INSSTCP5MA0116

3. Using a screwdriver, loosen the screw retaining the mounting

base and front part of the thermostat. Remove the front part

of the thermostat from the mounting base by tilting it upard;

4. Align and secure the mounting base to the connection box

using the two screws supplied;

5. Route wires coming from the wall through the hole of the

mounting base and make the required connections using

the “Four-wire installation” gure, and using the supplied

solderless connectors. A pair of wires (black) must be

connected to the power source (120-208-240 VAC) and

another pair (yellow) must be connected to the heating

cable (refer to the drawings displayed on the back of the

thermostat). For connections with aluminum wires, you must

use CO/ALR connectors. Please note that thermostat wires

do not have polarity, meaning that any wire can be connected

INSSTCP5MA0116

to the other. Then, connect the wires of the oor temperature

sensor at the indicated location behind the thermostat.

6. Reinstall the front part of the thermostat on the mounting

base and tighten the screw at the bottom of the unit;

7. Turn on the power;

8. Set the thermostat to the desired setting (see the following

section).

4-WIRE INSTALLATION

INSSTCP5MA0116

Security mode

Ambient

temperature

(Ambient mode)

Floor

temperature

(Floor mode)

First Start-up

At the rst start-up, the thermostat is initially in the Man

(manual) and modes. The temperature is displayed in

degrees Celsius and the standard factory set point adjustment

is 21°C. The hour displays --:-- and must be adjusted before

switching to the Auto or Pre Prog mode. The maximum oor

temperature is limited to 28°C.

Ambient and Floor Temperature

The gures displayed below the icon indicate the ambient

temperature, ±1 degree. The gures displayed below the

icon indicate the oor temperature, ±1 degree. Both

temperatures can be displayed in degrees Celsius or Fahrenheit

(see “Display in degrees Celsius/Fahrenheit”).

OPERATION

INSSTCP5MA0116

Temperature Set Points

The gures displayed beside the icon indicate the ambient

() or the oor ( ) temperature set points. They can be

displayed in degrees Celsius or Fahrenheit (see “Display in

degrees Celsius/Fahrenheit”).

Out of any adjustment mode, press down the + button to

increase the set point, or the - button to decrease it. Set points

can only be adjusted by increments of 1 degree. To quickly

scroll through the set point values, press and hold down the

button.

Maximum Floor Temperature Limitation

At any time, the oor temperature (in mode) is maintained

at less than 28°C (82°F) in order to avoid overheating caused

by an excessive heating request, which could damage some

materials or be detrimental for health.

Adjustment of the Hour and the Day of the Week

Adjustment procedure of the hour and the day of the week.

1. Press down the Day/Hr button, whether it is in Man, Auto or

Pre Prog mode.

2. At this moment, the icon and the day of the week blinks

and you can adjust the day of the week using the + or -

button and conrm your choice by pressing down the Mode

or Day/Hr button. You can also press down the desired

day of the week button without using the + or - button and

conrm your choice using the Mode or Day/Hr button.

3. The two gures indicating the hour blink. You must adjust

them using the + or - button and conrm your choice by

pressing down the Mode or Day/Hr button.

4. The two gures indicating the minutes blink. You must adjust

them using the + or - button and conrm your choice by

pressing down the Mode or Day/Hr button. The adjustment

is then completed and the thermostat returns to the previous

mode.

INSSTCP5MA0116

At any time, you can exit the adjustment mode of the day and

the hour by pressing down the Exit button or by not pressing

any button during 1 minute.

In case of a power failure, the thermostat is self-sufcient for

2 hours. If the failure lasts less than 2 hours, the thermostat

saves the adjustment of the hour and the day of the week.

When the power is restored after an extensive failure (more

than 2 hours), the hour and the day of the week are recovered,

but you must update them.

Display in Degrees Celsius/Fahrenheit

The thermostat can display the ambient temperature and

the set point in degrees Celsius (standard factory setting) or

Fahrenheit.

Adjustment procedure for degrees Celsius/Fahrenheit

display.

1. To switch from the degrees Celsius to the degrees

Fahrenheit, and conversely, simultaneously press down the

+ and - buttons for more than 3 seconds until the icon

blinks.

2. Press down the + button to switch from the degrees Celsius

to the degrees Fahrenheit, and conversely. The degree

Celsius or Fahrenheit symbol is displayed.

3. When the adjustment is completed, press down the Exit

button or do not press down any button during 5 seconds to

exit the adjustment function.

This adjustment can be done from any of the three principal

modes.

Manual Mode (Man)

From the Manual mode, you can manually adjust the thermostat

set point by pressing down the + or - buttons to increase the

value, or to decrease it. Please note that if the backlight is off,

the set point will not change when you press down these buttons

INSSTCP5MA0116

for the rst time instead, the backlight will be activated. To

quickly scroll through the set point values, press and hold down

the button. From mode, the set points can range between 3

and 35°C and can only be adjusted by increments of 1°C (from

37 to 95°F; by increments of 1°F from the Fahrenheit mode).

From mode, the set points can range between 3 and 28°C

(from 37 to 82°F). The thermostat will turn off if the set point is

lowered below 3°C (37°F), and the set point value displayed

will be --. The standard factory set point adjustment is 21°C

(mode). From this mode, the screen displays the /

mode temperature, the /mode set point, the hour and

the day of the week.

This mode is initially activated when the power is turned on for

the rst time. You must adjust the hour (as described in the

section “Adjustment of the hour and the day of the week”)

before switching to other modes by pressing down the Mode

or Pre Prog button.

Automatic Mode (Auto)

To switch from the Manual mode to the Automatic mode, and

conversely, press down the Mode button. The Man or Auto icon

is displayed at the bottom of the screen as applicable.

From the Automatic mode, the thermostat adjusts the set points

according to the programmed periods. If no data is entered,

the thermostat acts as in Manual mode and the standard

factory set point adjustment is 21°C ( mode). It is always

possible to manually adjust the set point using the + or - button.

The selected set point will be effective until one period is

programmed, which represents an hour and a day of the week.

Note that, if the set point is lowered to off (--), the programming

will not be effective. It is possible to program 4 periods a day,

meaning that the set point can change automatically up to 4

times a day. The period order is not important.

From this mode, the screen displays the temperature, the set

point, the hour, the day of the week and the current programmed

period number (1 to 4; as applicable).

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Termostato de Stelpro

Stelpro

Stelpro MAESTRO Manual de usuario

Stelpro

Stelpro STE302NP Manual de usuario

Stelpro

Stelpro STZB402 Plus Manual de usuario

Stelpro

Stelpro B2T1 Series Manual de usuario

Stelpro

Stelpro STE402P Manual de usuario

Stelpro

Stelpro STZW402+ Manual de usuario

Stelpro

Stelpro STE402NP Manual de usuario

Stelpro

Stelpro ASMC402 Manual de usuario

Stelpro

Stelpro STE402NP Manual de usuario

Stelpro

Stelpro B1T1ER Manual de operación y mantenimiento

Stelpro

Stelpro STCP Manual de usuario

Stelpro

Stelpro STCP Manual de usuario

Stelpro

Stelpro Maestro SMC402 Manual de usuario

Stelpro

Stelpro STE302P Manual de usuario

Stelpro

Stelpro True Comfort PS120/240WF Manual de usuario

Stelpro

Stelpro STE241 Manual de usuario

Stelpro

Stelpro MAESTRO Manual de usuario

Stelpro

Stelpro STE241 Manual de usuario

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario

Stelpro

Stelpro Allia ASAT402ZB Manual de usuario

Stelpro

Stelpro STCNP Manual de usuario

Stelpro

Stelpro SHUT1 Series Manual de usuario

Stelpro

Stelpro STCNP Manual de usuario

Stelpro

Stelpro STE362RNP Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Honeywell

Honeywell T6811 Manual de usuario