STEINEL IS 3180-24 Manual de usuario
110011484 11/2011 Technical changes subject to no prior notifi cation.
STEINEL America Inc.
9O51 Lyndale Avenue South
USA - Bloomington, MN 55420
Tel: +1-952-888-5950
Fax: +1-952-888-5132
www.steinel.net
Installation Instructions
Commerical Occupancy Sensor
Consignes d'installation
Détecteur de présence à usage commercial
English
Français
Made in
Romania
RoHS
Compliant
IS 3180-24 IS 3360-24 IS 345-24
www.steinel.net (800) 852-4343
In this package
Ř IS 3180-24
occupancy sensor
Ř Accessory pack
containing: plastic
nipple, plastic
washer, lock nut,
lens cover
Ř Installation
instructions
Ř IS 345-24
occupancy sensor
Ř Accessory pack
containing: plastic
nipple, plastic
washer, lock nut,
lens cover
Ř Installation
instructions
Ř IS 3360-24
occupancy sensor
Ř Accessory pack
containing: plastic
nipple, plastic
washer, lock nut,
lens cover
Ř Installation
instructions
Installation Overview
WARNING
Ř Turn power off at the circuit breaker before installing the sensor
Ř Sensor must be installed and used in accordance with appropriate
electrical codes and regulations
Ř Installation by a qualified electrician is recommended
2
Intended uses
Ř Suitable for automatic
switching of lights
Environmental considerations
For indoor use only
Needed for installation
Ř Recommended wire: 18
AWG, 3 conductor
Ř For use with a STEINEL
power pack
IS 3180-24 IS 3360-24 IS 345-24
www.steinel.net (800) 852-4343
Product Overview
24VDC PIR
IP20
Product description
The IS 3180-24, IS 3360-24
and IS 345-24 are part of the
STEINEL family of German-
engineered, high performance
commercial occupancy
sensors. They provide
exceptional lighting control in a
wide range of building spaces.
3
The sensors turn lighting ON either
automatically with occupancy or
manually using a low voltage wall
switch and the manual on mode
of a STEINEL power pack. After a
period of time where no occupancy
has been detected, the sensors
switch lighting OFF.
Applications
Ř Wall or ceiling mount
applications where
180° coverage is
needed
Ř Classrooms, offices,
conference rooms
Ř Ceiling mount
coverage where aisle
way coverage is
needed
Ř Corridors
Ř Ceiling mount
applications where
360° coverage is
needed
Ř Open and cubicle
spaces
Ř Lobbies
IS 3180-24 IS 3360-24 IS 345-24
www.steinel.net (800) 852-4343
Product Overview
1 - Back housing
2 - Front housing
3 - Shroud
4 - Lens
5 - Decorative cover
6 - Light level setting
7 - Time delay setting
8 - Lock nut
9 - Washer
10 - Snap in threaded nipple
4
www.steinel.net (800) 852-4343
Specifications
Product Overview
5
24 VDC, 12 mA
Wall/ceiling mount
5 sec to 15 min
.2 - 200 fc
2 - 2000 lux
180° horizontal
90° vertical
up to 65 ft *T
up to 42 ft *R
7
448
IP20
-4°F to +122°F
-20° C to +50°C
3.74x3.74x2.56 in
9 5 x 9 5 x 6 5 m m
Voltage
Mounting
Time Delay
Light Level
Coverage
Detection
levels
Switching
zones
Environment
Dimensions
5 Year Warranty
UL and CUL Listed, RoHS Compliant
*T = tangential reach
*R = radial reach
24 VDC, 12 mA
Ceiling mount
5 sec to 15 min
.2 - 200 fc
2 - 2000 lux
360° horizontal
180° vertical
up to 130 ft *T
up to 25 ft *R
11
1416
IP20
-4°F to +122°F
-20° C to +50°C
3.74x3.74x2.56 in
9 5 x 9 5 x 6 5 m m
24 VDC, 12 mA
Ceiling mount
5 sec to 15 min
.2 - 200 fc
2 - 2000 lux
180° horizontal
45° vertical
65 x 13 ft *T
40 x 13 ft *R
5
280
IP20
-4°F to +122°F
-20° C to +50°C
3.74x3.74x2.56 in
9 5 x 9 5 x 6 5 m m
IS 3180-24 IS 3360-24 IS 345-24
www.steinel.net (800) 852-4343
Mounting
Placement guidelines
Ř Detection lens must have a
clear, unobstructed view of
the detection area; the sensor
does not detect from behind
obstacles, such as walls or
panes of glass
Ř Ideal mounting height is 8-12
feet
Ř The site of installation should
be at least 20 inches away
from another light because
heat radiated from it may
activate the system
Ř An optional corner wall mount
(product no. 648015 black or
648114 white) is available for
installing the IS 3180-24 in
corners.
6
IS 3360-24 IS 345-24
IS 3180-24
www.steinel.net (800) 852-4343
Installation
Installation - wall or ceiling
mount with screws
Ř Confirm power is off at the
circuit breaker
Ř Install power pack and run
low voltage wire to the sensor
location
Ř Remove the decorative cover
Ř Remove the screws securing
the front and back housings
Ř Separate the top housing from
the back housing
Ř Fasten the back housing to
the wall with screws through
the pre-punched holes (60 mm
or 2 3/8 in apart)
Ř Connect wiring
Ř Reattach the front housing to
the back housing and secure
with screws
Ř Snap the decorative cover back
in place
7
wires 200 mm
www.steinel.net (800) 852-4343
Installation
Installation - ceiling mount
with threaded nipple
Ř Confirm power is off at the
circuit breaker
Ř Install power pack and
run low voltage wire to the
sensor location
Ř Run low voltage wires from
the sensor through the
provided threaded nipple and
snap threaded nipple in back
of sensor
Ř Cut 7/8” hold in ceiling tile
Ř Place threaded nipple
through hole in ceiling tile,
add washer and secure with
locknut
Ř Wire sensor to STEINEL
power pack
8
Ceiling Tile Washer
Locknut
Sensor
Threaded Nipple
Threaded Nipple
Ceiling Tile
Locknut
Washer
Sensor
www.steinel.net (800) 852-4343
Operation
The IS 3180-24, IS 3360-24 and
IS 345-24 work with a STEINEL
power pack to control lighting
based on occupancy and daylight.
Manual operation
A line voltage or low voltage
switch may be used for manual off
control when the power pack is in
automatic on mode.
For manual on only operation, a
low voltage momentary switch is
required along with a STEINEL
power pack set in manual on
mode.
Light level function
The sensors incorporate a built-in
light level sensor which keeps
lighting off during daylight hours,
regardless of occupancy.
9
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Idiomas:
Otros manuales de Accesorios de STEINEL
STEINEL
STEINEL True Prescence KNX Manual del propietario
STEINEL
STEINEL Studioline 400 Manual de usuario
STEINEL
STEINEL HFLUM2-120 Manual de usuario
STEINEL
STEINEL IS 3180 Manual de usuario
STEINEL
STEINEL SensorSchalter IR 180 AP Manual de usuario
STEINEL
STEINEL GluePRO 300 Manual de usuario
STEINEL
STEINEL LEDVANCE Osram ST8 LB Gen2 Manual de usuario
STEINEL
STEINEL IS 3180 Manual de usuario
STEINEL
STEINEL IS 2180-5 Manual de usuario
STEINEL
STEINEL LuxMaster BLS Manual de usuario
STEINEL
STEINEL iHF 3D KNX Guía de configuración rápida
STEINEL
STEINEL HBS 300 Manual de usuario
STEINEL
STEINEL ISD 3360 Manual de usuario
STEINEL
STEINEL IR 180 UP easy Manual de usuario
STEINEL
STEINEL IS 1 Manual de usuario
STEINEL
STEINEL IR 180 KNX Guía del usuario
STEINEL
STEINEL GluePRO 300 Manual de usuario
STEINEL
STEINEL True Presence Manual de usuario
STEINEL
STEINEL IS 140-2 Manual de usuario
STEINEL
STEINEL GL 60 S Series Manual de usuario
