Contents
1. GENERAL INFORMATION............................................................................................... 3
1.1. Application................................................................................................................. 3
1.2. Technical data............................................................................................................ 3
1.3. Equipment included ................................................................................................... 4
1.4. Dimensions................................................................................................................ 5
1.5. Design ....................................................................................................................... 6
2. SAFETY PRECAUTIONS.................................................................................................. 7
3. STARTUP AND OPERATION........................................................................................... 9
3.1. Installing the handles ................................................................................................. 9
3.2. Installing and removing the arbor, MT2 twist drill bit, or tap chuck.............................10
3.3. Installing and removing the annular cutter.................................................................12
3.4. Installing and removing the screw tap.......................................................................13
3.5. Installing and removing the cooling system...............................................................14
3.6. Preparing..................................................................................................................15
3.7. Drilling.......................................................................................................................17
3.8. Thread cutting...........................................................................................................19
3.9. Adjusting the gibs......................................................................................................20
3.10. Replacing the motor brushes..................................................................................21
4. ACCESSORIES...............................................................................................................22
4.1. Pressure cooling system...........................................................................................22
4.2. Pipe attachment DMP 251 ........................................................................................22
4.3. Long arbor MT2 × 19 mm..........................................................................................23
4.4. MT2 tap chuck × 19 mm with adapter .......................................................................23
4.5. MT2 tap chuck × 31 mm with adapter .......................................................................25
4.6. Vacuum base............................................................................................................27
5. EXPLODED VIEWS AND PARTS LISTS.........................................................................28
6. DECLARATION OF CONFORMITY.................................................................................38
7. WARRANTY CARD..........................................................................................................39
