
Operating Instructions
Connecng to your SteakAger
• Download the SteakAger App from the App Store or Google Play for free.
• Make sure your appliance is plugged in and running.
• Follow the below App instrucons for either iOS, Android.
•
• WiFi Connecon :
• ** NOTE : If connecng through WiFi you will need to set up and account.
Make sure to conrm the account with the conrmaon email before
trying to sign in.
• Aer opening the app press “Connect to SteakAger”. You will then be
prompted to select “Wi Connecon” or “Bluetooth Connecon”. Press
“Wi Connecon” and enter your credenals. If you have already created
an account, enter your credenals and press login. If you have not created
an account press create account and enter your informaon.
• Aer signing in through WiFi you will need to go into the Sengs (Gear
Icon) and go into WiFi conguraon to select the network and enter your
password.
• If you receive an error message “Please wait 4 minutes for data to load”,
you may have entered the incorrect informaon or your ager is not
connecng to your network properly.
•
• Bluetooth Connecon :
• When connecng through bluetooth you do not need a login to access
your SteakAger. This is the easiest and quickest way to setup and view
your SteakAger data.
• Aer opening the App press “Connect to SteakAger” you will then be
prompted to select “Wi Connecon” or “Bluetooth Connecon”. Press
“Bluetooth Connecon” and you will be immediately redirected to your
home screen.
• If you receive any error messagers once connected, “Please wait 4
minutes for data to load”. Your unit may not be plugged in or connecng
properly. If you are unable to resolve the issue with the troubleshoong
guide, contact us at www.TheSteakAger.com