STATESMAN XR714W Manual de usuario
Please read these instructions carefully before use and retain for future reference.
Before switching on your appliance – Always check for any damage that may have been caused in transit.
Instruction Manual
XR714W 7KG 1400RPM WASHING MACHINE
XR814W 8.5KG 1400RPM WASHING MACHINE
Serial number:
2
CONTENTS
Important Safety Instructions ........................................3
Specication.............................................................. 4-5
Appliance Overview.......................................................6
Installation ................................................................. 6-8
Operating Instructions............................................. 8-12
Cleaning and Maintenance.................................... 13-14
Fuse Replacement ......................................................14
Trouble Shooting Guide......................................... 15-17
Disposal Information ...................................................18
3
IMPORTANT SAFETY INSTRUCTIONS
Read and follow all of the instructions even if you feel you are familiar with the product, and nd a
place to keep this manual handy for future reference.
Important: This product is intended for domestic indoor use only.
When using electrical appliances, basic safety precautions should always be followed:
1. All electrical repairs must be carried out by a qualied electrician. Inadequate repairs may result
in a major source of danger for the user and invalidate the warranty.
2. Do not operate the appliance with a damaged cord or plug, after it malfunctions or has been
dropped or damaged in any way.
3. Check the voltage of the appliance matches the household voltage, which is located on the
rating label.
4. Use of an extension cord is not recommended with this product.
5. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge.
6. Cleaning and user maintenance shall not be made by children
7. Keep the appliance and its cord out of reach of children.
8. Children shall not play with the appliance.
9. The product must only be used for washing and rinsing of laundry that are marked accordingly.
10. Always unplug the appliance before attempting to move. When disconnecting from the electricity
supply, pull the plug and not the cord.
11. When installing the appliance to the water supply ensure that the new supplied hose is used.
12. The door may become extremely hot during operation; ensure that children and animals are kept
away from the appliance.
13. Do not lean or put any weight on the open door of the appliance.
14. Ensure that the ventilation openings found at the base of the appliance are not obstructed
i.e. carpets and rugs.
15. Before using the appliance ensure that all packaging materials and transit bolts are removed,
keep the transit bolts in a safe place in case you move in the future.
16. Before each use ensure that all foreign objects are removed from the garments being washed
as these may damage the appliance and garments.
17. Do not install the appliance in bath rooms, wet rooms or similar rooms.
18. Do not store explosive substances such as aerosol cans with a ammable propellant near
the appliance.
19. Ensure that the appliance is only used for its intended purpose i.e. washing laundry etc.
20. Keep detergents out of reach of children.
21. Before each use, check that the drum of the appliance is empty.
22. This appliance is designed to operate in ambient temperatures between 0°C and 40°C with
humidity below 95% when the temperature is 25°C.
23. The machine is equipped with a connecting cable and earthed plug for connection to 220-240V
at 50Hz. Check the voltage of the appliance matches the household voltage on the rating label
and specication for further details.
24. This appliance must be earthed
WARNING: The appliance is heavy and care is needed when unpacking and moving it. Get
extra help and only hold the appliance by the casing – never hold by the door or detergent
drawer.
4
TECHNICAL SPECIFICATION - XR714W
Trade Mark Statesman
Model Number XR714W
Rated Capacity (kg) 7kg
Category Type Front loading washing machine
Programs to which the information relates to Cotton 60°C and 40°C
Energy Eciency Class / Scale from A+++(Highest
Eciency) to D (Lowest Eciency) A+++
Annual Energy Consumption (kWh/yr) 174
Energy Consumption of the Standard 60°C
Cotton Programme at Full Load (kWh) 0.86
Energy Consumption of the Standard 60°C
Cotton Programme at Partial Load (kWh) 0.74
Energy Consumption of Standard 40°C
Cotton Programme at Partial Load (kWh) 0.59
Weighted power o-mode (P_o) (W) 0.49
Weighted Power left-on mode (P_I) (W) 0.48
Annual Water Consumption (l) (L/yr) 10600
Spin Eciency Class
A (most ecient) to G (least ecient) B
Maximum Spin Speed (rpm) 1400
Program duration of the standard program
Cotton 60°C at full load 272min
Cotton 60°C at partial load 247min
Cotton 40°C with partial load 234min
Weighted time in left-on mode 10min
Other
Water Supply cold
Water Supply Pressure Minimum (kPa) 50
Maximum (kPa) 800
Noise Emission (dB) Wash (dB) 62
Spin (dB) 78
Remaining Moisture Content (%) 51
Capacity (kg) 7
Dimensions (h*w*d) (mm) 850*595*520
Net Weight (kg) 57
Gross Weight (kg) 60
Package Weight (kg) 3
Total Power (W) 2000
Voltage (V) 220~240
Frequency (Hz) 50
Built-In No
5
TECHNICAL SPECIFICATION - XR814W
Trade Mark Statesman
Model Number XR814W
Rated Capacity (kg) 8.5kg
Category Type Front loading washing machine
Programs to which the information relates to Cotton 60°C and 40°C
Energy Eciency Class / Scale from A+++(Highest
Eciency) to D (Lowest Eciency) A+++
Annual Energy Consumption (kWh/yr) 200
Energy Consumption of the Standard 60°C
Cotton Programme at Full Load (kWh) 0.97
Energy Consumption of the Standard 60°C
Cotton Programme at Partial Load (kWh) 0.93
Energy Consumption of Standard 40°C
Cotton Programme at Partial Load (kWh) 0.71
Weighted power o-mode (P_o) (W) 0.49
Weighted Power left-on mode (P_I) (W) 0.48
Annual Water Consumption (l) (L/yr) 11000
Spin Eciency Class
A (most ecient) to G (least ecient) B
Maximum Spin Speed (rpm) 1400
Program duration of the standard program
Cotton 60°C at full load 272min
Cotton 60°C at partial load 242min
Cotton 40°C with partial load 237min
Weighted time in left-on mode 10min
Other
Water Supply cold
Water Supply Pressure Minimum (kPa) 50
Maximum (kPa) 800
Noise Emission (dB) Wash (dB) 62
Spin (dB) 78
Remaining Moisture Content (%) 53.2
Capacity (kg) 8.5
Dimensions (h*w*d) (mm) 850*595*560
Net Weight (kg) 60
Gross Weight (kg) 63
Package Weight (kg) 3
Total Power (W) 2050
Voltage (V) 220~240
Frequency (Hz) 50
Built-In No
6
APPLIANCE OVERVIEW
INSTALLATION
It is recommended that the appliance be installed by a qualied plumber. Before installing the
appliance ensure that the area that you have selected is suitable, water tap close by, enough
ventilation and allowing the appliance door to fully open for loading and unloading. Ensure the
appliance is installed on a at even surface but not on carpet and is not placed in direct sunlight.
WARNING: Transit bolts must be removed before installation.
Detergent
Drawer
Display Control Dial
Door
Filter Door
7
Removing Transit Bolts
• Loosen the four transit bolts by turning in an anti-clockwise
direction using a spanner.
• Remove each transit bolt by pulling out of the hole.
• Once all transit bolts have been removed, t the supplied
hole covers in the empty holes.
Levelling the appliance
• Check that the adjustable feet of the appliance are at against the appliance, to do this turn in
a clockwise direction.
Important: Do not replace the adjustable feet with castors.
• Once the appliance is in the correct position, push down on each
corner to see if there is any movement. If movement is found,
it means that the appliance is not level and the adjustable feet
will need readjusting.
• To loosen the adjustable feet turn in an anti-clockwise direction
• Push down again on each corner to see if there is any movement,
if movement is found repeat the above sequences again.
WARNING: The drum of the appliance spins at a very high
speed, if the appliance is not level and on a solid oor it may
cause loud noise, vibration and unwanted movement in the appliance.
Connecting the Inlet hose
• Connect the inlet hose to the water tap and fasten in an
anticlockwise direction.
• Connect the other end of the inlet hose to the inlet valve
found on the back of the appliance and fasten tightly in a
clockwise direction.
• If there are any leakages repeat the above sequences
ensuring that all connections are tightly fastened.
• The appliance must be connected to a cold water supply.
Important: Do not bend or kink when installing the hose
8
Connecting the drain hose
• Fit the drain hose ensuring that it is 65 – 100cm above the oor;
otherwise it could cause poor drainage.
• Connect the drain hose support bracket to the drain hose and
place drain hose into the drainage pipe.
Important: Do not put the drain hose more than 30cm into the
drain pipe and the drain hose cannot be immersed in water
otherwise the appliance will not operate correctly.
OPERATING INSTRUCTIONS
Before using the appliance for the rst time you must run a complete cycle without clothes, this will
remove any water which was left from the manufacturers test runs; follow below steps;
• Put a small amount of detergent into the drawer and close.
• Press the On/O button .
• Turn the control dial to the “Cotton” setting.
• Press the Start/Pause button .
Sorting Clothes
• Do not overll the appliance above the load capacity.
• Garments should be sorted by colour and care label, most garments have a textile care label in
the collar of side seam. Do not wash dark colours with whites or light colours as this may
stain the garments.
• Make sure that all garments have no foreign
objects left in pockets.
• Close any zips, fasten hooks etc. before washing.
• Soiled and stained garments should be pre-treated with
stain removers etc. before washing.
• For garments that have a woollen surface or are prone to
pilling, turn inside out to help protect.
Detergent
• Pull out the detergent drawer.
• If doing a pre-wash add detergent into compartment (I).
• For a main wash add detergent into compartment (II).
• If required add fabric softener into compartment .
Important: Care labels should be checked before adding
softener to wash.
• Do not add detergent above the maximum suggested levels.
9
Functions
Indicators
: When this indicator appears it means that the “Time Delay” function has been selected.
: When this indicator appears it means that the “Sound O” function has been selected.
: When this indicator appears it means that the “Child Lock” function has been selected.
: The lock indicator will appear during a cycle and after for a short time until the appliance has
emptied all water out.
• On/O Button: Press this button once to turn appliance on and press again to turn appliance o,
if no programmes have been selected after 10 minutes then the appliance will automatically
switch o.
• Start/Pause Button: Press the button once to start a cycle, press again and the cycle will pause.
During a pause, settings can be modied. Press again and the cycle will continue on the last set
programme.
• Temperature Button: This button is used to select the water temperature; temperatures will vary
depending on the programme selected. The temperature will ash on the panel during the
selection process.
• Spin Button: Use this button to select spin speed (0 to 1400RPM); speeds will vary depending on
the programme selected. The spin setting will ash on the panel during selection process.
• Rinse Button: This button allows you to adjust the time that the cycle rinses your garment, when
selected the display panel will show the suggested setting.
• Time Delay Button: Time delay can be set between 3 to 24 hours, press the button repeatedly to
set time.
: These indicators mean that a pre-wash, wash, rinse and spin cycle is in
process, they will ash from left to right indicating which function is in process.
10
Programmes
• Dark Colour: This cycle is for dark cotton or easy care garments (see Care Label).
• Synthetics: This cycle can be used to wash shirts made of cotton, linen, synthetic bres or
blended fabrics.
• Intensive: This cycle can be selected to wash particularly dirty garments and help boost stain
removal.
• Bedding: This cycle is suitable for washing large heavy items such as bed sheets.
• Quick Wash: This cycle is suitable for washing a small amount of lightly soiled garments.
• Self-Clean: This cycle is to clean the drum and pipes of the appliance and has a pre-set
temperature of 60/90°c to sterilize the appliance.
• Spin: This cycle is to be used to extract excess water from garments.
• Rinse: The cycle is to be used to rinse remaining detergent and excess water from garments.
• Mixed: This cycle can be used for garments made of dierent materials not colours.
• Cotton: This cycle is to be used to wash hard-wearing and heat resistant fabrics made of cotton
or linen.
• Delicate: This cycle can be used for washing delicate garments. such as satin, synthetic bres
and mixed blends.
• Wool / Hand Wash: This cycle can be used for woollen garments, for those only approved for
machine wash, on the care label. Check the care label for the recommended temperature.
• Down Jacket: This cycle is ideal for down lled garments.
• Allergy Care: The increased rinse cycle helps to reduce pollen and dust mists.
• Baby Care: For garments that demand a stronger rinsing strength.
• Jeans: This cycle is ideal for washing garment made from denim.
Features
• Power-O Memory: If a power cut occurs during the cycle, the settings will be saved and
operation will resume when the power is restored.
• Child Lock: Press the “Temperature” and “Spin” buttons simultaneously for 3 seconds to
activate or deactivate the child lock. When the child lock is activated all buttons will be locked
until deactivated or the cycle is nished.
• Sound O: Press the “Spin” and “Time Delay” button simultaneously for 3 seconds to activate or
deactivate.
• Unbalance Protection: During spin-drying, if clothes are distributed unevenly, the washing
machine will attempt to untangle and re-distribute the load. The spin-drying speed will lower
automatically for the purpose of avoiding the strenuous vibration of the washing machine.
• Reload: If you need to add garments to the wash after the cycle has started press and hold
the “Start/Pause” button for 3 seconds, the appliance will beep twice; this means that the reload
feature has been activated. Wait for the indicator to disappear, the door can now be opened.
Once garments have been added press the “Start/Pause” button to resume the wash.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Arandela de STATESMAN
