StarTech.com NETRS232 Manual de usuario

Manual Revision: 05/16/2019

User Manual

For the latest information and specications visit

www.startech.com/NETRS232

1 Port RS232 Serial over IP Device Server

Actual product may vary from photos

SKU#: NETRS232

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Compliance Statements

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du

Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other

Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and

other protected names and/or symbols of third-party companies not related in

any way to StarTech.com. Where they occur these references are for illustrative

purposes only and do not represent an endorsement of a product or service

by StarTech.com, or an endorsement of the product(s) to which this manual

applies by the third-party company in question. Regardless of any direct

acknowledgement elsewhere in the body of this document, StarTech.com

hereby acknowledges that all trademarks, registered trademarks, service marks,

and other protected names and/or symbols contained in this manual and

related documents are the property of their respective holders.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Safety Statements

Safety Measures

• Wiring terminations should not be made with the product and/or electric

lines under power.

• Cables (including power and charging cables) should be placed and routed

to avoid creating electric, tripping or safety hazards.

Mesures de sécurité

• Les terminaisons de câblâge ne doivent pas être eectuées lorsque le produit

et/ou les câbles électriques sont sous tension.

• Les câbles (y compris les câbles d’alimentation et de chargement) doivent

être placés et acheminés de façon à éviter tout risque électrique, de chute ou

de sécurité

安全対策

• 電源が入っている状態の製品または電線の終端処理を行わないでくださ

い。

• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回し

を行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう

にしてください。

Misure di sicurezza

• I terminiali dei li elettrici non devono essere realizzate con il prodotto e/o le

linee elettriche sotto tensione.

• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati

e stesi in modo da evitare pericoli di inciampo, rischi di scosse elettriche o

pericoli per la sicurezza.

Säkerhetsåtgärder

• Montering av kabelavslutningar får inte göras när produkten och/eller

elledningarna är strömförda.

• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så

sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Table of Contents

Compliance Statements........................................................................1

Safety Statements..................................................................................2

Product Diagram ....................................................................................4

Front View.................................................................................................................................................... 4

Rear View...................................................................................................................................................... 5

DB-9 Serial Port Pinout............................................................................................................................ 6

RJ45 Port Pinout ........................................................................................................................................ 6

Product Information ..............................................................................7

Packaging Contents ................................................................................................................................. 7

System Requirements.............................................................................................................................. 7

Hardware Installation............................................................................8

DIN-Rail Bracket......................................................................................................................................... 8

DIN-Rail Mounting.................................................................................................................................... 8

Connecting to Terminal Block Power................................................................................................. 9

Software Installation .............................................................................9

Operation..................................................................................................................................................... 10

Specications..........................................................................................14

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Product Diagram

Front View

1DB-9 Serial Port

2Transmit LED

3Power LED

4Receive LED

5Power Jack (10-30V DC)

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Rear View

1Terminal Block (10-30V DC)

2RJ45 Port

1 2

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

DB-9 Serial Port Pinout

1 5

6 9

Pin 1 DCD Pin 6 DSR

Pin 2 RXD Pin 7 RTS

Pin 3 TXD Pin 8 CTS

Pin 4 DTR Pin 9 RI

Pin 5 GND

RJ45 Port Pinout

Pin 1 TX+ Pin 3 RX+

Pin 2 TX- Pin 6 RX-

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Product Information

Packaging Contents

• Serial over IP Device Server x 1

• DIN Rail Kit x 1

• Terminal Block x 1

• Universal Power Adapter (NA/UK/EU) and AU in Australia x 1

• Software CD x 1

• User Manual x 1

System Requirements

Cables

• RJ45 terminated Cat5 or higher Ethernet cabling

Network

• 10/100Mbps compatible Ethernet network

Operating System

• Windows® 8, 8.1, 7, Vista, XP, 2000, Windows® Server 2012,

2008 R2, 2003 or Linux (The included software does not

support Linux. To emulate a local COM port Linux users

would need to use Telnet.).

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Hardware Installation

DIN-Rail Bracket

Follow the below procedure to install the DIN-Rail Bracket to

the RS232 Device Server.

1. Align the DIN-Rail Bracket ush onto the back of the Device

Server.

2. Align the DIN-Rail Bracket Mounting Holes with the Pilot

Holes on the Device Server and use the Screws (x 2) to

secure the DIN-Rail Bracket to the Device Server.

Installing the Din Rail Bracket

DIN-Rail Mounting

Follow the below procedure to mount the device server to a

DIN-Rail.

1. Tilt the Device Server, making sure that the Metal Spring

located at the back is positioned on top of the DIN-Rail.

2. Push the Device Server towards the DIN-Rail, until it clicks.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Connecting to Terminal Block Power

The Device Server is powered by either the Universal Power

Adapter (included), or a 2-wire 10~30V DC Power Source via

the Terminal Block (included).

1. Attach the included Universal Power Adapter to an AC

Electrical Outlet.

- or -

2. To use terminal block power, gently pull the Terminal Block

Connector Housing from the Device Server.

3. Using a Flat Head Screwdriver, loosen the Screws on the

Terminal Block Connectors.

4. Connect the Power and Ground wires from your DC Power

Source to the proper Terminal Block Connectors and

fasten the Screws. The terminals are marked on the device

server housing.

5. Reinsert the Terminal Block Connector Housing into the

Device Server.

Software Installation

1. Using a CAT5e/6 Cable connect the RJ45 Port on the

Device Server to your Local Area Network (LAN).

Note: Alternatively, you can also use a Crossover Cable to

connect the Device Server directly to your system for the

initial conguration.

2. Insert the provided CD into your DVD/CD-ROM drive.

Otros manuales para NETRS232

Tabla de contenidos

Otros manuales de Servidor de StarTech.com

StarTech.com

StarTech.com RK1536BKF Manual de usuario

StarTech.com

StarTech.com RK1836BKF Manual de usuario

StarTech.com

StarTech.com SV1108IPEXT Manual de usuario

StarTech.com

StarTech.com NETRS232 Manual de usuario

StarTech.com

StarTech.com NETRS2321POE Manual de usuario

StarTech.com

StarTech.com SV1115IPEXT Manual de usuario

StarTech.com

StarTech.com NETRS232485W Manual de usuario

StarTech.com

StarTech.com NETRS2321P Manual de usuario

StarTech.com

StarTech.com RK2236BKF Manual de usuario

StarTech.com

StarTech.com USB4000IP Manual del sistema

StarTech.com

StarTech.com WALLSHELF4U Manual de usuario

StarTech.com

StarTech.com RK619WALL Manual de usuario

StarTech.com

StarTech.com NETRS232 Manual de usuario

StarTech.com

StarTech.com NETRS42348PD Manual de usuario

StarTech.com

StarTech.com USB4000IP Manual de usuario

StarTech.com

StarTech.com RK919WALLO Manual de usuario

StarTech.com

StarTech.com NETRS232485 Manual de usuario

StarTech.com

StarTech.com SV1105IPPCI Manual

StarTech.com

StarTech.com PM1115UW Manual de usuario

StarTech.com

StarTech.com USB4000IP Manual de usuario

StarTech.com

StarTech.com NETRS2322P Manual de usuario

StarTech.com

StarTech.com NETRS232_1 Manual de usuario

StarTech.com

StarTech.com 8STUSB1000IP Manual de usuario

StarTech.com

StarTech.com USB1000IP Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario