StarTech.com S251BMU3FP Manual de usuario
Manual Revision: 02/06/2020
User Manual
For the latest information and specications visit
www.startech.com/S251BMU3FP
USB 3.0 Fingerprint Encrypted Drive Enclosure
| For 2.5” SATA SSDs/HDDs
Actual product may vary from photos
SKU#: S251BMU3FP
1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Compliance Statements
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other
Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and
other protected names and/or symbols of third-party companies not related in
any way to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service
by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.
2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Safety Statements
Safety Measures
• Wiring terminations should not be made with the product and/or electric
lines under power.
• Cables (including power and charging cables) should be placed and routed
to avoid creating electric, tripping or safety hazards.
Mesures de sécurité
• Les terminaisons de câblâge ne doivent pas être eectuées lorsque le produit
et/ou les câbles électriques sont sous tension.
• Les câbles (y compris les câbles d’alimentation et de chargement) doivent
être placés et acheminés de façon à éviter tout risque électrique, de chute ou
de sécurité
安全対策
• 電源が入っている状態の製品または電線の終端処理を行わないでくださ
い。
• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回し
を行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう
にしてください。
Misure di sicurezza
• I terminiali dei li elettrici non devono essere realizzate con il prodotto e/o le
linee elettriche sotto tensione.
• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati
e stesi in modo da evitare pericoli di inciampo, rischi di scosse elettriche o
pericoli per la sicurezza.
Säkerhetsåtgärder
• Montering av kabelavslutningar får inte göras när produkten och/eller
elledningarna är strömförda.
• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så
sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.
3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Table of Contents
Compliance Statements........................................................................1
Safety Statements..................................................................................2
Product Diagram....................................................................................4
Exterior View ............................................................................................................................................... 4
Interior View................................................................................................................................................ 5
Product Information..............................................................................6
Package Contents ..................................................................................................................................... 6
Requirements ............................................................................................................................................. 6
Hardware Installation............................................................................7
Installing a SATA Hard Drive .................................................................................................................. 7
Software Operation ...............................................................................11
Navigation and Icons............................................................................................................................... 11
Formatting the Hard Drive ...................................................................14
Changing the Master Password........................................................................................................... 16
Fingerprint Setup...................................................................................................................................... 16
Renaming a Fingerprint Scan ............................................................................................................... 18
Deleting a Fingerprint Scan................................................................................................................... 18
Forgetting the Current Password........................................................................................................ 19
LED Indicators ........................................................................................19
4
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Diagram
Exterior View
1LED Indicators (Ready,
Error, and Wait)
2USB Micro-B Port
3Fingerprint Pad
4Disk Access LED
3
1
4
2
5
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Interior View
1SATA Hard Drive Connector
2Hard Drive Mounting Screw Holes (x 2)
1
2
6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Information
Package Contents
• USB 3.0 Fingerprint Encrypted Drive Enclosure x 1
• 50 cm USB-C to USB Micro-B Cable x 1
• 50 cm USB-A to USB Micro-B Cable x 1
• Micro Screw Driver x 1
• Installation Screw Kit x 1
• User Manual x 1
Requirements
• 2.5” SATA SSD or HDD
• Host Computer with either a USB-C or USB-A port
• Default Password = startech
7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Hardware Installation
Installing a SATA Hard Drive
1. Using the Micro Screwdriver (included), remove the two
Enclosure Screws from each of the sides on the Drive
Enclosure.
Removing the Enclosure Screws
2. Slide the Drive Slot from the Drive Enclosure.
8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Removing the Drive Slot
3. Flip the Drive Slot over, to expose the SATA Hard Drive
Connector.
Flip over the Drive Slot
4. On a 300angle, slide the Hard Drive into the SATA Hard
Drive Connector.
9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Inserting the Hard Drive
5. Gently push down on the Hard Drive securing it into the
SATA Hard Drive Connector.
6. Flip the Drive Slot over and insert two Hard Drive
Mounting Screws into the two Hard Drive Mounting
Holes.
Tabla de contenidos
Manuales populares de Accionamiento de CC de otras marcas
Vincent Associates
Vincent Associates UNIBLITZ ED12DSS Manual de usuario
EKSMA OPTICS
EKSMA OPTICS DQ-100-4 Manual de lista de piezas
Chamberlain Garog
Chamberlain Garog D Series Manual de usuario
Parker
Parker PDS Series Manual de usuario
Festo
Festo DGC G Series Guía de configuración
Binks
Binks QS-5012-1-CE Manual de usuario
ABB
ABB RSYC-01 Manual de usuario
Rockwell Automation
Rockwell Automation PowerFlex 700S Manual del propietario
WEG
WEG DeviceNet CFW500 Manual de usuario
Siemens
Siemens SINAMICS G Hoja de datos
Siemens
Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Instrucciones de funcionamiento
SOMFY
SOMFY JR RU 30 Manual de usuario