StarTech.com USB2DVI Manual de usuario

USB to DVI Adapter

USB2DVI Instruction Manual

Actual product may vary from photo

USB 2.0 to DVI Multi-Display Adapter

FFCCCCCCoommpplliiaanncceeSSttaatteemmeenntt

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

UUsseeooffTTrraaddeemmaarrkkss,,RReeggiisstteerreeddTTrraaddeemmaarrkkss,,aannddootthheerrPPrrootteecctteeddNNaammeessaannddSSyymmbboollss

This manual may make reference to trademarks, registered trademarks, and other protected names

and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur

these references are for illustrative purposes only and do not represent an endorsement of a

product or service by StarTech.com, or an endorsement of the product(s) to which this manual

applies by the third-party company in question. Regardless of any direct acknowledgement

elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks,

registered trademarks, service marks, and other protected names and/or symbols contained in this

manual and related documents are the property of their respective holders.

Instruction Manual

TTaabblleeooffCCoonntteennttss

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Using the Second Display in Extended Mode . . . . . . . . . . . . . . . . . . .4

Using the Second Display in Clone Mode . . . . . . . . . . . . . . . . . . . . . .4

Designating the Primary Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Alternate Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Media Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Instruction Manual

Thank you for purchasing a StarTech.com USB 2.0 to DVI Multi-Display Adapter. The

perfect solution for turning an available USB 2.0 port into a DVI connection, USB2DVI

provides high quality, secondary display capability that can be used in a variety of settings

in notebook or desktop applications, while up to six USB2DVI adapters can be connected

to a source computer simultaneously, for maximized display capability in any multimedia

environment.

IInnttrroodduuccttiioonn

•Supports resolutions up to 1600 x 1200 @ 32 bits

Features

System requirements:

•Processor requirement: 1.2GHz or higher clock speed

Package contents:

•USB to DVI Adapter (1)

This package should contain:

•Supports USB 2.0 connectivity

•Quick, easy installation

•USB powered, no external power source required

•RAM: 512Mb or higher

•An available USB 2.0 port

•30Mb of available disk space

•DVI capable monitor

•CD/DVD-ROM drive (driver installation)

•Driver CD (1)

•Instruction Manual(1)

•Connect multiple USB2DVI adapters simultaneously (up to six)

Instruction Manual

IInnssttaallllaattiioonn

1. Insert the Driver CD (included) into the CD/DVD-ROM drive.

2. Browse through the Driver CD and locate the Setup.exe file:

3. Double-click on the Setup.exe file to begin the installation process. Click Next on the

screen that follows.

4. When the End User License Agreement appears, please read and accept it, then

click Next.

Cont’d on next page

Please note: The following installation steps must be completed prior to

connecting USB2DVI to the host computer, to ensure proper functionality.

Instruction Manual

5. When the Ready to Install screen appears, please click on Install.

6. When the Completing the .... Setup Wizard screen appears, please click on Finish

to complete software installation. Once the necessary files have been installed,

Windows will notify you that installation has completed:

7. Connect USB2DVI to an available USB 2.0 port on the host computer.

8. Connect the desired DVI monitor to the DVI port on USB2DVI. Windows will then

detect that the monitor has been connected, and display the following notification:

Instruction Manual

CCoonnffiigguurraattiioonn

To configure the image being displayed by the monitor that is connected to USB2DVI,

right-click on a blank section of the desktop, select Properties, then click on the

Settings tab to display the following screen:

Dropdown

Resolution

Adjustment

Slider

Configure the secondary display by selecting it from the dropdown menu, then adjusting

the desired settings:

Using the Second Display in Extended Mode

In Extended Mode, the monitor that is connected to USB2DVI creates an extension of the

Windows Desktop displayed on the primary monitor. To set the display to function in this

mode (once selected from the dropdown menu), check the box marked Extend my

windows desktop onto this monitor, then arrange its position (virtually) with respect to

the primary monitor by dragging the monitor icons (shown above as Primary/Secondary

orientation) to reflect the physical orientation of the displays.

Using the Second Display in Clone Mode (default)

In Clone Mode, the monitor that is connected to USB2DVI simply mirrors the image

displayed on the primary monitor. To set the display to function in this mode (once

selected from the dropdown menu), uncheck the box marked Extend my windows

desktop onto this monitor.

Primary/Secondary

orientation

Designating the Primary Display

To select which of the connected monitors will act as the primary display, select the

monitor that will be used as the Primary Display from the Dropdown menu (referenced on

page 4), and place a checkmark next to Use this device as the primary monitor.On

some displays it is necessary to disable the main display (i.e. uncheck the box marked

Extend my Windows display onto this monitor for the main display).

Instruction Manual

Following the software installation for USB2DVI, you may have noticed an icon in the

taskbar as illustrated below. Clicking on this icon will open a menu that offers

configuration of the display (connected to USB2DVI):

Here, you can set the secondary display to act as an extension of the primary desktop,

or as a mirror image that duplicates the contents on the primary display.

Similarly, the screen resolution, color quality, position of the screen and rotation of the

screen can be adjusted from this menu.

To disable the secondary display, select Off.

Following this change, the monitor connected to USB2DVI will remain set as the primary

display even if the computer enters hibernate mode or operation is suspended or

powered down. If the monitor is disconnected from USB2DVI, or USB2DVI is removed

from the host computer, the original monitor will revert to being the primary display.

Alternate Configuration

Media Playback

Please note that while operating in Extended Mode, USB2DVI can display media files

and DVDs using a broad variety of media players, however in Clone Mode, limited

support is available for video playback.

Instruction Manual

TTeecchhnniiccaallSSuuppppoorrtt

StarTech.com’s lifetime technical support is an integral part of our commitment to provide

industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools,

documentation, and downloads.

WWaarrrraannttyyIInnffoorrmmaattiioonn

This product is backed by a one-year warranty. In addition, StarTech.com warrants its

products against defects in materials and workmanship for the periods noted, following

the initial date of purchase. During this period, the products may be returned for repair, or

replacement with equivalent products at our discretion. The warranty covers parts and

labor costs only. StarTech.com does not warrant its products from defects or damages

arising from misuse, abuse, alteration, or normal wear and tear.

LLiimmiittaattiioonnooffLLiiaabbiilliittyy

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

officers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product. Some states do not allow the exclusion or limitation of

incidental or consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

SSppeecciiffiiccaattiioonnss

Max Resolution Supported 1600 x 1200 @ 32 bits

Operating System Support Windows 2000/XP/Vista

Signal Input USB

Signal Output DVI

Cable Length 35cm (13.8”)

Connector(Input) USB B-Type

Connector(Output) DVI-I Female

Weight 75g

Dimensions(mm) 87 X 47.9 X23.6 (34.25 x 18.9 x 9.3”)

20 November 2007 (Rev. B)

AAbboouuttSSttaarrTTeecchh..ccoomm

StarTech.com is “The Professionals’ Source for Hard-to-Find Computer Parts”.

Since 1985, we have been providing IT professionals with the quality products

they need to complete their solutions. We offer an unmatched selection of

computer parts, cables, server management solutions and A/V products and

serve a worldwide market through our locations in the United States, Canada, the

United Kingdom and Taiwan.

Visit www.startech.com for complete information about all our products and to

access exclusive interactive tools such as the Parts Finder and the KVM

Reference Guide. StarTech.com makes it easy to complete almost any IT

solution. Find out for yourself why our products lead the industry in performance,

support, and value.

Tabla de contenidos

Otros manuales de Adaptador de StarTech.com

StarTech.com

StarTech.com USB867WAC22 Manual de usuario

StarTech.com

StarTech.com 25S22M2NGFFR Manual de usuario

StarTech.com

StarTech.com USB312SAT3CB Manual de usuario

StarTech.com

StarTech.com ECESATA22 Manual de usuario

StarTech.com

StarTech.com USB31000SA Manual de usuario

StarTech.com

StarTech.com DKT3CHSD4GPD Manual de usuario

StarTech.com

StarTech.com USB2IR2 Manual de usuario

StarTech.com

StarTech.com MPEX2S952 Manual de usuario

StarTech.com

StarTech.com USB433WACDB Manual de usuario

StarTech.com

StarTech.com USB2100S Manual

StarTech.com

StarTech.com MSDREADU3CA Manual de usuario

StarTech.com

StarTech.com USB32DPPRO Manual de usuario

StarTech.com

StarTech.com 35S24M2NGFF Manual de usuario

StarTech.com

StarTech.com SFF-TA-1001 Manual de usuario

StarTech.com

StarTech.com ICUSBANDR232 Manual de usuario

StarTech.com

StarTech.com USBBT2EDR4 Manual de usuario

StarTech.com

StarTech.com MDVIDVIMF Manual de usuario

StarTech.com

StarTech.com SSPMSVESA Manual de usuario

StarTech.com

StarTech.com PEX4S553 Manual de usuario

StarTech.com

StarTech.com USB100BT Manual de usuario

StarTech.com

StarTech.com MHD2HDF11 Manual de usuario

StarTech.com

StarTech.com USB2DVIPRO Manual de usuario

StarTech.com

StarTech.com 8STUSB312SAT3CB Manual de usuario

StarTech.com

StarTech.com 127B-USBC-MULTIPORT Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario