StarTech.com ST123HDA Manual de usuario

Manual Revision: 11/18/2011

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

ST123HDA

3 Port Component Video Splitter with

Digital Audio

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and

Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction............................................................................................1

Features ........................................................................................................................................................ 1

Contents ....................................................................................................................................................... 1

System Requirements.............................................................................................................................. 1

Installation ..............................................................................................2

Connecting the A/V source to the distribution amplier........................................................... 2

Connecting the distribution amplier to the display .................................................................. 3

Connecting the A/V source to the distribution amplier........................................................... 3

Connecting the distribution amplier to the display .................................................................. 4

Connecting the distribution amplier to the display .................................................................. 5

Technical Support ..................................................................................6

Warranty Information............................................................................6

Instruction Manual

Introduction

Thank you for purchasing a StarTech.com Component Video Distribution Amplier

with Audio. This product is the perfect addition to any analog video entertainment

distribution system, delivering both standard denition and high denition video and

digital or analog audio to multiple display units.

Features

• Three separate composite video sources can be distributed to up to 9 displays (3 per

video source)

• Works with standard denition and high denition displays

• Supports resolutions up to 1080p

• Sturdy metal construction

Contents

• Distribution amplier with audio (1)

• Instruction Manual (1)

• Power Adapter (1)

System Requirements

• Composite or component video source(s)

• A composite or component compatible display

Instruction Manual

Installation

The following examples illustrate the conguration options for the distribution

amplier, when used with a HD component video source (YPbPr), HD RGBHV video

source, or composite video source.

Prior to installation, please situate the distributor near the video signal sources, as well

as an available power outlet, in order to minimize cabling requirement.

ST123HDA used with HD component video source (YPbPr)

Using a standard component/YPbPr cable, you can connect your video source to the

distribution amplier, to be used with up to three displays:

Connecting the A/V source to the distribution amplier

1. Insert the connectors from one end of a standard component video cable to the

color-coded output ports located on the A/V source.

2. Connect the remaining end of the component cable to the corresponding ports,

(marked INPUT) on the rear panel of the distribution amplier. The necessary ports

are labelled Pr/R/V, Pb/B/V2 and Y/G/V1.

Front Panel

Rear Panel

Diplay #1 Video Source #1Diplay #2Diplay #3

Front Panel Rear Panel

Instruction Manual

3. Insert the connectors from one end of a standard RCA audio cable into the audio

ports provided by the audio/video source.

4. Connect the remaining end of the RCA audio cable to the INPUT audio ports located

on the rear panel of the distribution amplier.

Connecting the distribution amplier to the display

1. Insert the connectors from one end of a standard component video cable to the

colorcoded OUTPUT ports located on the distribution amplier. These ports will be

labelled Pr/R/V, Pb/B/V2 and Y/G/V1

2. Connect the remaining end of the component cable to the corresponding ports

provided by the display. Be sure to follow the color coding appropriately, to ensure

that there is a direct connection between each component signal.

3. Insert the connectors from one end of a standard RCA audio cable to the OUTPUT

audio ports located on the distribution amplier. These ports will be marked R/V

and L/H, denoting the left and right audio channels.

4. Connect the remaining end of the RCA audio cable to the input ports located on

your display. For further instruction on the location of these ports, please consult

the documentation that accompanied your display at the time of purchase.

ST123HDA used with HD RGBHV video source

Using a standard RGBHV cable, you can connect your video source to the distribution

amplier for use with up to three displays:

Connecting the A/V source to the distribution amplier

1. Insert the connectors from one end of a standard RGBHV video cable to the

color-coded output ports located on the A/V source.

2. Connect the remaining end of the component cable to the corresponding ports,

(marked INPUT) on the rear panel of the distribution amplier. The necessary ports

are labelled Pr/R/V, Pb/B/V2 and Y/G/V1.

Diplay #3 Diplay #2 Diplay #1 Video Source

Instruction Manual

3. (OPTIONAL) Insert one end of a standard digital coaxial audio cable into the digital

coaxial output port, provided by the audio/video source.

4. Connect the remaining end of the digital coaxial audio cable into the INPUT audio

port, marked COAXIAL, located on the rear panel of the distribution amplier.

Connecting the distribution amplier to the display

1. Insert the connectors from one end of a standard component video cable to the

colorcoded OUTPUT ports located on the distribution amplier. These ports will be

labelled Pr/R/V, Pb/B/V2 and Y/G/V1

2. Connect the remaining end of the component cable to the corresponding ports

provided by the display. Be sure to follow the color coding appropriately, to ensure

that there is a direct connection between each component signal.

3. (OPTIONAL) Connect one end of the digital coaxial audio cable into the OUTPUT

audio port, marked COAXIAL, located on the distribution amplier.

4. Connect the remaining end of the digital coaxial audio cable into the corresponding

input port located on the display.

ST123HDA used with HD RGBHV video source

Using a standard RGBHV cable, you can connect your video source to the distribution

amplier for use with up to three displays:

Connecting the A/V source to the distribution amplier

1. Insert the connector from one end of a standard composite video cable into the

appropriate output port located on the A/V source. For further information as to the

location of the necessary port, please consult the documentation that accompanied

the display at the time of purchase.

Video 3 Video 3

Video 1 Video 1

Video 3

Source 3

Video 2

Source 2

Video 1

Source 1

Video 2 Video 2

Instruction Manual

2. Connect the remaining end of the composite cable to the corresponding port,

(marked INPUT) on the rear panel of the distribution amplier. The necessary port(s)

will be labelled Pr/R/V1, Pb/B/V2, Y/G/V1. Please note: Up to three video sources can

be used, by inserting one composite video cable in each of the three input ports.

The signal that is used with the V1 input, will provide a signal to the outputs labelled

V1. Similarly, the signal that is used with the V2 input will provide a signal to the

outputs labelled V2; the signal that is used with the V3 input will provide a signal to

the outputs labelled V3.

Connecting the distribution amplier to the display

1. Insert the connector from one end of a standard composite video cable into one of

the color-coded OUTPUT ports located on the distribution amplier. Please note:

the video signal provided will correspond directly to the port designation. For

example, the signal connected to INPUT V1 will be transmitted through OUTPUT(s)

V1, and so on.

2. Connect the remaining end of the composite video cable used in step 1 to the

display, as designated by the video port number.

Instruction Manual

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to

provide industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools,

documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

In addition, StarTech.com warrants its products against defects in materials

and workmanship for the periods noted, following the initial date of purchase.

During this period, the products may be returned for repair, or replacement with

equivalent products at our discretion. The warranty covers parts and labor costs only.

StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

ocers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product. Some states do not allow the exclusion or limitation

of incidental or consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.

StarTech.com is your one-stop source for every connectivity part you need. From

the latest technology to legacy products — and all the parts that bridge the old and

new — we can help you nd the parts that connect your solutions.

We make it easy to locate the parts, and we quickly deliver them wherever they need

to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to

the products you need in no time.

Visit www.startech.com for complete information on all StarTech.com products and

to access exclusive resources and time-saving tools.

StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology

parts. StarTech.com was founded in 1985 and has operations in the United States,

Canada, the United Kingdom and Taiwan servicing a worldwide market.

Tabla de contenidos

Otros manuales de Accesorios de StarTech.com

StarTech.com

StarTech.com ST122PRO Manual de usuario

StarTech.com

StarTech.com ST128HD20 Manual de usuario

StarTech.com

StarTech.com ST124UTP Manual

StarTech.com

StarTech.com ST122HDMILE Manual de usuario

StarTech.com

StarTech.com ST122HD20 Manual de usuario

StarTech.com

StarTech.com ST122PRO Manual de usuario

StarTech.com

StarTech.com ST122DVIA Manual de usuario

StarTech.com

StarTech.com ST124DVI Manual

StarTech.com

StarTech.com ST122DVIA Manual de usuario

StarTech.com

StarTech.com ST122 Manual de usuario

StarTech.com

StarTech.com ST122PROA Manual

StarTech.com

StarTech.com DisplayPort ST124DP Manual de usuario

StarTech.com

StarTech.com ST122SW Manual

StarTech.com

StarTech.com ST1216PRO Manual de usuario

StarTech.com

StarTech.com ST122 Manual

StarTech.com

StarTech.com ST124HD20 Manual de usuario

StarTech.com

StarTech.com NBCOOLERPRO Manual de usuario

StarTech.com

StarTech.com ST122HD20 Manual de usuario

StarTech.com

StarTech.com MOD4POWERNA Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario