STARFRIT 024604 Instrucciones de montaje
INSTRUCTIONS FOR USE AND CARE P.3
INSTRUCTIONS POUR L’USAGE ET L’ENTRETIEN
P.27
INSTRUCCIONES DE USO Y MANTENIMIENTO P.53
ELECTRIC PRESSURE COOKER
AUTOCUISEUR ÉLECTRIQUE
OLLA DE PRESIÓN ELÉCTRICA
2
3
OPERATING AND SAFETY INSTRUCTIONS
Item no. Volume
(Liter) Voltage (V) Wattage (W) Frequency (Hz) Working
Pressure (kPa)
024604 6120 1000 60 0-70
IMPORTANT SAFEGUARDS
READ THE INSTRUCTIONS BEFORE USE
WARNING: To reduce the risk of fire, electrical shock, serious personal
injury and/or property damage:
A. To protect against electric shock, DO NOT immerse, power cord,
plug or motor base, power cord or plug in water or any other
liquid. Always wipe the motor base with a damp cloth. Wash all
accessories after each use.
B. Keep the appliance out of the reach of children and person with
reduced physical, sensory, or mental capabilities. Close adult
supervision is necessary when any appliance is used near children.
C. Do not operate the product if it has a damaged power cord or
plug, or after the appliance malfunctions or has been damaged
in any manner. Do not attempt to examine or repair this product
yourself. Please contact the customer sevice e-mail provided in this
use manual.
D. Always unplug the appliance from the electrical outlet when not in
use, before putting on or taking off parts, and before cleaning. Pull
directly on the plug – do not pull on the power cord.
E. Do not plug or unplug the product into/from the electrical outlet
with a wet hand.
F. Do not use accessory attachments not recommended or not sold
by the product manufacturer.
G. Connect the power plug to an easily accessible outlet so that
the appliance can be unplugged immediately in the event of an
emergency.
H. Do not allow the power cord to hang (e.g., over the edge of a table
or counter) or touch hot surfaces.
I. This product is intended for indoor, household use. Do not use
outdoors or for any other purpose.
J. Do not place the product on or near a hot gas or electric burner, or
in heated oven or microwave oven. Always use the appliance on a
flat, level, stable surface.
K. The appliance will not operate unless properly assembled. Make
sure the lid is locked before operating the appliance.
4
L. Do not attempt to defeat the lid interlock mechanism. The
appliance will not operate if the lid is not properly locked.
M. Always use the provided parts and accessories to avoid injuries.
Avoid contact with moving parts to prevent personal injury or
damage to the appliance.
N. Do not place anything on the appliance while operating.
O. Do not move the appliance when in use.
P. Allow the appliance to completely cool down and make sure
internal pressure is released before opening the lid. If the lid
is difficult to turn, it is an indication that the appliance is still
pressurized. DO NOT force it open as it may cause serious injuries.
Q. Do not use the appliance to pressure fry with oil. This may cause
serious injuries.
R. Unplug from electrical outlet before cleaning or when not in
use. Allow the unit to cool down completely before assembling,
disassembling, relocating.
S. Do not leave the product unattended while it is in use.
T. Do not touch cover or obstruct the pressure release valve as it is
extremely hot and may cause scalding.
U. Use extreme caution when opening the lid and releasing steam
manually as hot steam will escape and may cause scalding. Use
protective oven mitts or gloves to avoid burns or serious personal
injury. Always use utensils to handle hot food.
V. The cooking pot is designed for use with this appliance only. It
must never be used on a stovetop, range top, hot gas or electric
burner or in a heated oven. It may warp and result in injuries. To
avoid serious injuries, always cook inside the removable cooking
pot.
W. Always make sure the outside of the cooking pot is dry prior to use.
If the pot is returned to the appliance when wet, it may damage or
cause the product to malfunction.
X. Use the product in a well-ventilated area. DO NOT operate the
appliance directly under kitchen cabinets or near the edge of a
table. Ensure that the surface is clean and free of any substances of
liquid that can affect your appliance.
Y. Always attach the plug to appliance first, then plug cord into
wall outlet. To disconnect press on the ‘’CANCEL’’button, then
remove plug from wall outlet. Connect the power plug to an easily
accessible outlet so the appliance can be unplugged immediately
in the event of an emergency.
5
2
6
4
1
5
3
7
Z. Do not use the appliance with a programmer or timing device that
switches it on automatically. The use of such devices is dangerous
and can cause a fire risk.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE
GROUNDED PLUG: As a safety feature, this appliance is equipped with a grounded
plug, which will only fit into a three-prong outlet. Do not attempt to defeat this safety
feature. Improper connection of the grounding conductor may result in the risk of
electric shock. Consult a qualified electrician if you are in doubt as to whether the
outlet is properly grounded.
SPECIAL INSTRUCTIONS: A short power supply cord used to reduce the risk resulting
from it being grabbed by children, becoming entangled in, or tripping over a longer
cord.
DO NOT alter the plug. DO NOT attempt to defeat the safety purpose of the
grounded plug.
BUILT-IN SAFETY MECHANISMS
6
1. Automatic temperature control: Appliance will automatically stop heating if the
cooking pot is missing / empty or operating without enough liquids.
2. Automatic pressure control: If the internal pressure exceeds maximum pressure
value, the appliance will automatically start releasing pressure through the pressure
release valve.
3. Extreme pressure protection: If the automatic temperature and pressure control
safety devices become invalid and the pressure inside the pot reaches maximum
value, the appliance will automatically start releasing pressure from the lid.
4. Anti-blocking steam vent device: A specially designed cover avoids food particles
from blocking the pressure release valve (under the lid) while in operation and
ensure steam exhausts smoothly during the cooking process.
5. Overheat safety device: The appliance will automatically disconnect if excessive
temperature is built up inside the cooking pot.
6. Special safety lid mechanism: The appliance is equipped with a locking lid
mechanism that prevents the appliance from operating if lid is not properly
locked. Locking mechanism also prevents the lid from opening when appliance is
pressurized.
7. Extreme pressure control: The appliance will automatically disconnect if it reaches
extreme pressure level.
BEFORE FIRST USE
READ THE INSTRUCTIONS BEFORE USE
A. Remove all packaging material and promotional card. Dispose of packaging.
B. Open the lid using the lid handle. (Fig. 1)
C. Remove the inner cooking pot (Fig. 2), the pressure release valve (Fig. 3), the
sealing ring (Fig. 4) and wash in hot soapy water with all other accessories. Dry
thoroughly.
WARNING: Do not immerse body, lid, electrical cord or plug in water or any other
liquid. Do not place in the dishwasher. Always hand wash.
D. Rinse the lid with hot water and dry thoroughly.
E. Wipe body with a damp cloth and dry thoroughly.
F. Reassemble the appliance. (Fig. 5)
NOTE: ALWAYS ensure the sealing ring is properly reinstalled under the lid and
the pressure release valve is back in the outlet.
7
Pressure release valve
(steam vent)
Sealing ring
Cover post Vent filter
Grommet
Grip pin
Lid
Non-stick inner
cooking pot
Outer pot
Base
Detachable power cord
Steaming tray
Measuring cup
Float valve
silicone gasket
Steaming tray
Measuring cup
Lid handle
Digital control panel
Sealing ring plate
Serving spoon
8
FIG. 1 HOW TO OPEN THE LID
Rotate the lid counterclockwise and lift upward.
FIG. 2 HOW TO REMOVE/REPLACE THE COOKING POT INSIDE THE BASE
Lift the inner cooking pot from the outer pot to wash or fill will food. Insert the cooking
pot back inside the appliance and rotate left and right to make sure it is in contact with
the heating plate. Always ensure the outside of the cooking pot is dry before replacing
inside the appliance.
FIG. 3 HOW TO REMOVE/INSTALL THE PRESSURE RELEASE VALVE
To remove, lift the valve upward. Insert the pressure release valve back into the
outlet. It is normal that the valve fits loose, it is required for pressure and temperature
regulation.
Always point the valve to ‘’sealing’’ position when operating and to ‘’release’’ position
to manually release the pressure. Pressure will not build inside the appliance if pressure
valve is not sealed properly.
Sealing positionComponent Release position
9
FIG. 4 HOW TO REMOVE/INSTALL THE SEALING RING AND VENT
COMPONENTS
The sealing ring is located under the lid. Using the grip pin, pull the sealing ring plate
out from the cover. Remove the sealing ring from the sealing ring plate by section.
With the sealing ring plate detached from the cover, you have access to the vent filter
and vent pipe (located under the vent filter). Next, remove the vent filter for cleaning.
NOTE: Although you will not need to remove the filter after every use, you should
periodically remove it for cleaning. With the sealing ring plate on the counter, use a
table knife on the rim of the filter vent and insert the tip into one of the filter slots; lift
the filter up. When the vent filter is clean, place back the vent filter by using the clips to
secure it.
NOTE: Ensure the sealing ring and the vent filter are properly reinstalled back on the
clips and into the sealing ring plate before operating the appliance. Never operate the
appliance with a damaged sealing ring.
FIG. 5 HOW TO CLOSE THE LID
Place the lid on the appliance and align the symbol with the ‘’open’’ mark on the body
and turn clockwise to align with the ‘’close’’ mark. Close the lid securely until a “click”
is heard. The appliance is equipped with a locking lid mechanism that prevents the
appliance from operating if lid is not properly locked.
10
COOKING PROGRESS DISPLAY
The Starfrit electric pressure cooker is designed with a unique feature that allows you to
cook any meal with peace in mind. The digital cooking stage display helps you monitor
the cooking stages every step of the way.
HEATING: will start immediately after a cooking function is selected. Heating stage
will light up and display will show rolling bars indicating that the heating stage
has started. During the heating stage the appliance will gradually reach maximum
temperature. Heating time may vary depending on food and quantity as well as
external factors such as ambient temperature.
PRESSURE: stage will light up and pressure will start to build inside the appliance.
Display will continue showing rolling bars . Pressurizing time may vary depending on
food and quantity as well as external factors such as ambient temperature (between
8-10 min). Pressure release valve will go up indicating the appliance is pressurized.
WARM: Once the pressure inside the appliance is completely released, pressure
release valve will drop down and appliance will automatically switch to WARM
function. Warm stage will light up and timer will start counting up by incrementing of 1
minute for up to 24 hours. Once maximum time is reached, appliance will automatically
turn OFF. Use extreme caution when opening the lid to avoid scalding.
± Cooking
time functions
Cooking progress
display
Cooking
functions
Operations Keys
Preset cooking
functions
Time display
CONTROL PANEL
Tabla de contenidos
Idiomas:
Otros manuales de Olla a presión eléctrica de STARFRIT
