Stardom Sohoraid SR4 Manual de usuario
SOHORAID
User Manual
SR4 Series
(NO SATA)
» SafeTANK SR4 Series (NO SATA) User Manual........1
1. Environmental Requirements ....................................................................................1
2. Package Contents and Product Views ......................................................................1
3. Hardware Requirements and Precautions ................................................................3
4. Hardware Installation Procedure ...............................................................................4
5. Description of Front Panel Operation and LCD Information......................................5
6. Support DisplayPort ..................................................................................................16
7. Support USB Power Delivery (SR4-B31+/SR4-BA31+) ............................................16
8. Replacement of Malfunctioning Drive and Data Rebuild Instructions...............17
9. System Temperature Overheat and Fan Failure Management..............................17
10. Frequently Asked Questions ...................................................................................17
» SafeTANK SR4 Series ( 無SATA) 產品使用說明 .. 18
1. 環境需求 ....................................................................................................................18
2. 產品外觀及包裝內容 ..................................................................................................18
3. 硬體需求與注意事項 ..................................................................................................20
4. 硬體安裝 ....................................................................................................................21
5. 前面板操作及 LCD 訊息說明 .....................................................................................22
6. 支援 Display 埠..........................................................................................................33
7. 支援 USB Power Delivery (SR4-B31+/SR4-BA31+) .................................................33
8. 故障硬碟更換步驟及資料重建功能說明 .....................................................................34
9. 系統過熱與風扇故障狀況排除....................................................................................34
10. 常見問題 ..................................................................................................................34
SR4 Series User Manual
V1.0
SR4 Series User Manual
1
2. Package Contents and Product Views
Introduction
Open the package and you shall nd the following parts：
» SafeTANK SR4 Series User Manual
Thank you for choosing the STARDOM product. This manual will familiarize you with the STARDOM
SR4 product. We recommend reading through this manual before using the STARDOM SR4 product.
The information provided in this manual was checked before publication, but the actual product
specications may have changed before shipping; Latest product specications and updates can be
found at www.STARDOM.com.tw. No separate notications will be provided by our company. If you
would like to receive the latest STARDOM product information, manuals, and rmware, or have any
questions regarding STARDOM products, please contact your local supplier or visit www.STARDOM.
com.tw for more information.
All product-related content in this manual are copyrighted by STARDOM TECHNOLOGY, INC.
• Please check the product and accessories for any defect or missing parts. If you have any questions,
please contact your product supplier.
• Please visit the official website - Download page (http://www.stardom.com.tw/STARDOM2016/
download.php) to download drivers and other related resources.
1. Environmental Requirements
Operating Temperature: 0 ～40 ℃(32 ～104 ℉)
Storage Temperature : -20 ～47℃(-4 ～116 ℉)
Line Voltage : 100 ～240V AC
SR4-BA31+ product x1
(with removable drive tray enclosed x 4)
SR4-B31+ product x1
(with removable drive tray enclosed x 4)
SR4-B31A product x1
(with removable drive tray enclosed x 4)
USB 3.2 C to C cable x1 USB 3.2 C to C cable x1 ――
USB 3.2 C to A cable x1 ――USB 3.2 C to A cable x1
Power Cable x1 Power Cable x1 Power Cable x1
Handle x1 Handle x1 Handle x1
Quick Installation Guide x1 Quick Installation Guide x1 Quick Installation Guide x1
Screws & Ejector pins Screws & Ejector pins Screws & Ejector pins
SR4 Series User Manual
2
Product View
Front View
Rear View
A. HDD access light
B. HDD enclosure handle
C. HDD enclosure pin release
D. LCM display
E. Power touch switch
F. System status light
G. UP button
H. DOWN button
I. ESC button
J. ENTER button
K. Fan
L. Mute button
M. Display port
N. USB 3.1 port
O. Power main switch
P. Power socket
Q. Fan speed switch
R. Anti-theft lock
High
Low
R
SR4 Series User Manual
3
LED Indicators :
3. Hardware Requirements and Precautions
1. When connected to the computer system, it’s prohibited to remove, insert or swap the hard drive
while data transfer is being performed.
2. It’s prohibited to change the positioning of the drives once the initial installation has been
completed as the changes made to the drive positions may destroy the RAID formation.
3. The product needs to be restarted after adding or changing the RAID mode, and the update is
guaranteed to be the new RAID mode.
4. When the Notebook which support USB PD function is only connected to SR4-B31+/ SR4-BA31+,
SR4-B31+/SR4-BA31+ can provide up to 24W (12V/2A) power supply, but if then connected to
other power supply such like the original Notebook power supply, Notebook will automatically
judge which one will be the main power source, usually the one which can provide more Wattage
will be. At this time, SR4-B31+/SR4-BA31+ may be interrupted and re-identied by the Notebook.
Therefore, before connecting to other power supplies, please make sure that there are no data
accessed between Notebook and SR4-B31+/SR4-BA31+.
5. SR4-B31+/SR4-BA31+ can only provide 24W at most, which is different from the original
Notebook power supply. It mainly to extend the Notebook's usage time. Take Macbook Pro 13"
as an example, the original power supply is 60W, assuming it take 2 hours for it to fully charge
the battery , use SR4-B31+/SR4-BA31+ might need three times time. Therefore, if user need to
use Notebook for a long time, it is recommended to connect the original power supply rst before
connect SR4-B31+/SR4-BA31+.
6. Whenever turning off or unplugging the SR4 from your computer system becomes necessary,
always remember to safely remove it from your operating system rst.
7. It is highly recommended for users to back up important data contained within the SR4 unit on
a regular basis or whenever the user feels necessary to a remote or a separate storage device.
Stardom will not be responsible for any lost of data caused during the use of the unit or the
recovery of the data lost.
Status Power Touch Switch System status light HDD LED Buzzer
RAID JBOD RAID JBOD
Power Main
Switch is not on — — — — — — — —
Power O Red light always on — — — — — —
No HDD Blue light always on — — Red light ashing — —
Access Blue light always on — — Blue light ashing — —
Disk Idle Blue light always on — — Blue light always on — —
Rebuilding -
Source Blue light always on — — Blue light
ashing — — — —
Rebuilding -
Target Blue light always on — — Purple light
ashing — — — —
Fan Failed Blue light always on Red light always on Blue light always on YES
Over Temp Blue light always on Red light always on Blue light always on YES
SR4 Series User Manual
4
4. Hardware Installation Procedure
Please follow the instructions below to complete the hardware installation.
Place the system on a stable surface. Ensure that it is well ventilated without blockage to
the vent and kept away from areas near water and damage prone areas.
Use the ejector pin included in the accessory kit and inserted into the pin release opening to
eject the removable drive tray latch and extract the removable drive tray.
For 3.5" HDD/SSD, please secure it by use six the larger screws included in the accessory
kit. For 2.5" HDD/SSD, please secure it by use four the smaller screws included in the
accessory kit.
When the hard drive installation has been completed, insert the hard drive tray into the
system horizontally and secure the latch into place.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Connect the power cable to the SR4, and then plug the power to the wall socket. Boot-up
the unit.
Connect the USB cable to the computer and the SR4 relevant port respectively.
First turn the power main switch on the back of the product to “I” to turn the power on,
then gently press the power touch switch on the front of the product until the power
symbol " " will light red.
Set the storage mode using the LCD and buttons on the front (please refer to section 5 for
front panel and LCD information).
After boot-up, your operating system will automatically detect the storage capacity of your
hard drives. Please follow the operating system instructions to congure and format your
drives. The formatted drives can be congured for the RAID setup.
If the product is not in use at the moment, the product can be put into power-off mode:
rst press the power touch switcth on the front of the product until the power symbol
"" turns to red; to use the product, press the power touch switcth on the front of the
product until the power symbol " " turns to blue.
If the product is not used for a long time, please turn o the product main power switch: rst
gently press the power touch switch on the front of the product until the power symbol " "
turns to red, then turn the power main switch on the back of the product to "O" to turn o the
power.
Note: Please avoid using hard disk drives from dierent manufacturers or dierent
models from the same manufacturer as this may impact system performance.
※The product is in a state of near-complete power-off in shutdown mode, and the hard disk, LCM, and fan are all
out of operation, providing only a small portion of power for preparation for subsequent startup.
SR4 Series User Manual
5
5. Description of Front Panel Operation and LCD Information
Front Panel Operation:
Enter: Enter: Enter to next level or Conrm
Esc: Back to next level or Cancel
Up / Down: Select Items
Users can set the RAID mode using the LCD and buttons on the front. The default is JBOD mode.
Using “Quick Setup” function, users can change the RAID mode to RAID 0 or RAID 5 quickly.
Please refer to LCD Information as below for other setting:
Level 0 Level 1 Level 2 Level 3 Level 4
External 4BAY
HARDWARE
RAID
Quick Setup Create One RAID RAID 0/ RAID 5 Select Disk
Delete All RAID
Disk Manager Identify Disk
Disk 1 Check Disk LED
Disk 2 Check Disk LED
Disk 3 Check Disk LED
Disk 4 Check Disk LED
Show Disk Info < Disk Info >
RAID Manager
Identify RAID Select RAID
Create RAID RAID 0 / RAID 5 Select Disk
Delete RAID Select RAID
RAID Info ― ―
Change RAID Pwd < Password > for RAID Setup
Rebuilding Priority Highest/High/Medium/Low/Lowest
System Manager
System Info Firmware Version
Changhe Password < Password > for System Info
Logout From Menu < Y or N >
Alarm Control Mute the Buzzer
Hardware Monitor
Voltage Monitor < 3.3V / 5V / 12V >
Temp. Monitor < Temp. >
Fan Monitor < Fan Speed /
Fan Level >
EXTERNAL 4 BAY
HARDWARE RAID
═ ═ Main Menu ═ ═
Quick Setup
═ ═ Main Menu ═ ═
Disk Manager
═ ═ Main Menu ═ ═
RAID Manager
═ ═ Main Menu ═ ═
System Manager
Level 0 Level 1
SR4 Series User Manual
6
The following is the display status set for the rst time:
P7~8
P9
P10~12
P13~15
Quick Setup :
Delete All RAID
═ ═ Main Menu ═ ═
Quick Setup
Level 1
Quick Setup :
Create One RAID
Quick Setup :
Delete All RAID
Level 2
Select Level :
RAID 0
Enter Password :
_
Enter Password :
_
Are You Sure?
Enter :Yes Esc : No
Select Level :
RAID 5
Level 2
Quick Setup :
Create One RAID
Level 3 Level 4
SR4 Series User Manual
7
Note
Note 1. If you don’t want to set password, please press "ENTER" to go to next step.
Note 2. If user forgot the password, it will not be allowed to access the data from the storage or write new data
into it. STARDOM will not be held liable for the damage or loss of data you stored on the storage.
• If you did not set password before, please
press "ENTER" to go to next step.
Level 1 Level 2
Disk Manager :
Identify Disk
Disk Manager :
Show Disk Info
═ ═ Main Menu ═ ═
Disk Manager
SR4 Series User Manual
8
Otros manuales para Sohoraid SR4
1
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Almacenamiento de Stardom
Stardom
Stardom Raidon GT2660-TB3 Manual de usuario
Stardom
Stardom ST5610-4S-WB Manual de usuario
Stardom
Stardom SOHORAID SR4-SB3PLUS Manual de usuario
Stardom
Stardom SOHORAID SR4-TB2 Manual de usuario
Stardom
Stardom SOHORAID MR2-B31BP Series Manual de usuario
Stardom
Stardom ST5610 Series Manual de usuario
Stardom
Stardom SOHORAID SR4-SB3 Manual de usuario
Stardom
Stardom itank i310 Manual de usuario
Stardom
Stardom SA2TB2 Manual de usuario
Stardom
Stardom SA2TB2 Manual de usuario
Stardom
Stardom SOHORAID SR2 Manual de usuario
Stardom
Stardom SafeTANK GT5640-B31 Manual de usuario
Stardom
Stardom SOHORAID DR8M-TB3 Manual de usuario
Stardom
Stardom SOHORAID DR2-B31 Manual de usuario
Stardom
Stardom SOHORAID SR4-TB3 Manual de usuario
Stardom
Stardom SOHORAID ST2-B31+ Manual de usuario
Stardom
Stardom iTANK MT1-B31BP Manual de usuario
Stardom
Stardom SA2TB3 Manual de usuario
Stardom
Stardom SOHORAID ST4-TB3 Manual de usuario
Stardom
Stardom SOHORAID DR8-TB3 Manual de usuario
Manuales populares de Almacenamiento de otras marcas
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
Rocstor
Rocstor COMMANDER 3F series Manual de usuario
HP
HP P9000 Manual de usuario
Western Digital
Western Digital Ultrastar Data60 Manual de usuario