StarBoard PX-DUO-50P Manual de usuario
StarBoard PX-DUO-50P/65P
1
Englis
h
Notices
Reproduction or reprinting, without permission, of this manual or any part thereof is prohibited.
The contents of this manual are subject to change without prior notice.
Every effort has been made to ensure that this manual is complete and correct. However, should
any questionable points, mistakes, etc., come to your attention, please inform the vendor.
Please be advised in advance that this company will assume no responsibility for losses, etc.,
resulting from the operation of this product, regardless of the preceding clauses.
Also, in the event that this manual has pages out of order, missing pages or other problems with
the printing or binding, it will be replaced free of charge within one year after purchase. Contact
technical support for details.
Discarding this product
This product must be disposed of as industrial waste, in accordance with the relevant laws and
regulations.
Special Instructions
This manual includes descriptions of required components in addition to descriptions of the
product itself. For details on required components, see "4.7 Required components (Other vendor)."
StarBoard PX-DUO-50P/65P
2
Englis
h
Disclaimers
Hitachi Software Engineering Co., Ltd. assumes no liability and makes no warranty, either express
or implicit, regarding the contents of this user's guide.
Also, the company makes no warranty as to the product's suitability, merchantability or fitness for
a particular intended use.
All products of Hitachi Software Engineering Co., Ltd., described in this user's guide are presently
for sale or are site-licensed.
Users who purchased the aforesaid product(s) will bear the costs of all required services, repairs,
and damages resulting from defects in this product, and will bear the costs of direct or indirect
damages (including the loss of profits or required information) that resulted from the product
defects.
Moreover, Hitachi Software Engineering Co., Ltd. retains the right to revise this user's guide and
to modify the contents thereof, without any obligation to notify anyone.
Product Assurance Provisions
This product is limited to use in the country where the user bought this product.
For warranty details, refer to "4.8 Provisions of Product Warranty" of this user's guide.
This 1st edition of the User's Guide (PXD-EU091015) is for the following products:
AH00235: PX-DUO-50P Digitiser
AH00246: Additional Function Button
AH00232: PX-DUO-65P Digitiser
AH00180: FX/PX-DUO Electronic Pen
Windows is registered trademarks of Microsoft Corporation (U.S.) and in other countries.
Other trademarks and product names are trademarks and/or registered trademarks of their
respective holders.
User's Guide Creation Dates
October 2009, First Edition PXD-EU091015
All Rights Reserved, Copyright(c) 2009, Hitachi Software Engineering Co., Ltd.
StarBoard PX-DUO-50P/65P
3
Englis
h
Introduction
Thank you very much for purchasing HitachiSoft's StarBoard PX-DUO-50P/65P (henceforth
referred to as "StarBoard").
This User's Guide has been created for people who already have a working knowledge of personal
computers (henceforth referred to as "PC").
Please make sure that you understand the contents of this User's Guide and use the software
correctly.
We hope that you make the most of this product.
If you have technical questions of Plasma Display, please contact the Plasma Display support
centre, which is mentioned in Plasma Display Operation Manual. Other questions, please contact
your dealer.
StarBoard PX-DUO-50P/65P
4
Safe Handling
Englis
h
Safe Handling
Markings and Symbols
Various markings and symbols are used in this user's guide and on this product, to ensure the
safe and correct use of this product and to prevent personal injury and property damage. These
symbols and their meanings are as explained below. Understand the information well before
reading the body of the user's guide.
This is a Safety Warning symbol. This symbol will appear to raise the
attention of the user to existing risks that may cause harm to people. To
avoid any chances of injuries or possibly death, DO NOT IGNORE the
safety instructions that follow this symbol.
WARNINGS
This warning will appear where there exists a risk of death or fatal injuries.
CAUTIONS
This warning will appear where there exists a risk of moderate or light injuries.
NOTICE
This warning will appear where there exists a risk of damage to property.
This symbol draws attention to cautions (including warnings).
This symbol indicates something prohibited.
This symbol indicates something that must be done.
StarBoard PX-DUO-50P/65P
5
Safe Handling
Englis
h
(1) Precautions for Use
WAR N IN G
Do not alter this product.
Do not make any adjustments, repairs or modifications not given in this
User's Guide.
Electric shock or other injury will result.
Do not open or remove the rear cover, cabinet, or cover to this
product.
Failure to comply may lead to personal injury or damage to the product.
Refer internal inspections, adjustments, and repairs to your dealer or
support centre.
Do not place objects on top of this product.
If a foreign object falls on top of or inside this product, it may lead to
personal injury or damage to the product.
NOTICE
Do not use a USB cable other than the one supplied.
Use of a USB cable other than the one supplied may result in
malfunction.
Do not place heavy objects on, pull on, or subject the USB cable to
excess heat.
Failure to comply may result damage to the USB cable.
Always grasp the plug of the USB cable when connecting or
disconnecting.
Pulling on the USB cable may result in scratching or damage to the
cable.
Always lock the casters with stoppers on the front side after installing
this product.
Failure to lock the casters may allow the product to move or slide.
SafetyPrecautions Required Precautions
StarBoard PX-DUO-50P/65P
6
Safe Handling
Englis
h
(2) Dealing with Trouble
CAUTION
What to do in case of emission of smoke, strange odor, or strange
noise.
If an abnormal condition such as emission of smoke, strange odor, or
strange noise happens to occur for some reason, immediately disconnect
the product's USB cable from the PC.
Confirm that the smoke or strange odor is no longer being emitted and
contact a support centre to request repairs.
Continued operation without repair may result in fire.
What to do if the product breaks or the USB cable is damaged.
If this product breaks or the USB cable becomes damaged for some
reason, immediately disconnect the USB cable from the PC and contact
a support centre.
Continued operation without repair may result in emission of a strange
odor or smoke.
(3) Precautions Regarding Handling
WAR N IN G
Do not touch the main unit during thunder and lightning storms.
Electric shock will result.
CAUTION
Do not hang from or climb onto the main unit.
This product may fall, tip over or become damaged, possibly resulting
in injury.
Take special care for children around this product.
Do not place a heavy object on the main unit.
Do not place a heavy object on this product.
The object may become unbalanced and fall, possibly resulting in
injury.
Do not expose this product to water or chemicals.
Do not place this product in a location exposed to dripping water, and
do not place containers with water or chemicals on or near this product.
If water or chemicals enter this product, fire or electric shock might
result.
StarBoard PX-DUO-50P/65P
7
Safe Handling
Englis
h
CAUTION
Do not mix new batteries with old batteries, and do not use other than the
specified batteries.
Improper use may cause the batteries to rupture or leak, possibly resulting in
fire, injury or corruption of the surroundings.
NOTICE
Disconnect the USB cable during extended periods of non-use.
For safety reasons, disconnect the USB cable if the product is not
going to be used for an extended period of time. Failure to comply
may result in malfunction.
Arrange the connecting cables properly.
Do not pinch the cables against a wall, or excessively bend, pull on or
twist the cables. This may expose, short or sever the core wires,
possibly resulting in fire or electric shock.
(4) Precautions Regarding Moving the Product
CAUTION
Always use two or more people to move this product.
This product is a very large and heavy precision instrument.
Always use two or more people and take great care when moving this
product.
Always disconnect the USB cable from the PC when moving this
product.
Failure to comply may result in damage to the USB cable and/or the
product itself.
Do not subject to shock of impact.
This product is a precision instrument. Excessive shock of impact may
hinder further operation.
Take extreme care when moving this product.
Always remove the Digitiser before removing or altering the height of
the plasma display.
Failure to comply may result in personal injury or damage to the
Digitiser unit.
StarBoard PX-DUO-50P/65P
8
Safe Handling
Englis
h
(5) Precautions Regarding Setup Environment
WAR N IN G
Wall mounting and ceiling mounting work should be performed by a
construction specialist.
Incomplete work may result in death or injury.
Be sure to use the specified mounting unit.
Do not place in a location with flammable or corrosive gas.
Placing this product in a location where there is flammable or
corrosive gas may result in fire or damage to this product.
There is a particular danger of explosion in the case of flammable gas.
Do not place in a location with flammable or corrosive gas.
CAUTION
Improper assembly might cause the product to fall over or result in
other accidents.
There is risk of injury if the product falls over.
Be sure to securely tighten the screws for each part.
Do not place in locations subject to excess moisture, dust, smoke, or
steam.
Placement in a location such as next to a kitchen or a humidifier may
result in fire or damage to this product.
Do not touch internally mounted parts.
Directly toughing internally mounted parts inside this product may
result in personal injury or damage to this product.
Do not use this product near water.
If water somehow gets inside this product, immediately disconnect the
USB cable and contact a support centre.
Continued use may result in fire or damage to this product.
StarBoard PX-DUO-50P/65P
9
Safe Handling
Englis
h
NOTICE
Regarding the setup environment
Set up this product on a level floor surface with a weight bearing
capacity of 150 kg/m2or more, and which is made of floor materials
that will not deform or become depressed due to movement by casters.
Do not use this product in locations subject to high temperature or
high humidity.
This product's usage environment conditions:
Temperature: 5°C – 35°C
Humidity: 20%RH – 80%RH (no condensation)
Do not set up in locations subject to vibration and/or shock of impact.
Vibration and/or shock of impact may harm internal components of
this product, resulting in damage to it. Do not set up this product in a
location subject to vibration or shock of impact.
Do not set up this product near a high-voltage line or power source.
If this product is set up near high-voltage lines or power sources, it
might receive interference.
Do not set up in a location subject to direct sunlight or near a heater.
Failure to comply may result in deformation of or damage to this
product.
Do not lay the Digitiser flat and then mount the plasma display.
The Digitiser will receive the weight of the plasma display, possibly
resulting in product failure.
Be careful about interference between equipment.
The plasma display might cause noise to enter the image or audio from
video decks, radios or other equipment, or cause this equipment to
malfunction. (If these problems occur, locate the equipment a
sufficient distance away from the display unit.)
(6) Precautions Regarding Disposal
NOTICE
At time of disposal, handle this product as industrial waste according
to all applicable laws and regulations.
When disposing of this product, the user should follow all laws and
regulations of the locality in which it is being used.
StarBoard PX-DUO-50P/65P
10
Safe Handling
Englis
h
(7) Contents of Warnings in this Manual
WA R N I N G Page
Please follow the stand's manual when you assemble the mobile stand.
When not following stand's manual, it may lead to personal injury or
damage to the product.
P.2-1
Please follow the stand's manual when you setup the plasma display.
When not following stand's manual, it may lead to personal injury or
damage to the product.
P.2-2
Be sure to perform earth work.
Be sure to properly connect the power cable earth. If the earth is not
connected, electric shock or fire might result.
P.2-4
CAUTION Page
Tighten the screws securely.
Improper assembly might cause the digitiser to fall, possibly resulting
in injury, or the impact of the fall might cause product failure.
P.2-2
Always perform the work with two or more people.
Otherwise, the equipment might fall, possibly resulting in injury, or the
impact might cause product failure.
P.2-2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Monitor de StarBoard
