3
1 Related Safety Information
Designate a management
A management should be designated in order to prevent accidents caused by manual
operation errors and poor safety check when 2 or more operators are operating a conveyor.
。
Do not touch the conveyor belt while the conveyor is running
Never put your hands inside the conveyor belt while it is running, or the risk of getting
hands caught or pinched in the conveyor driving rollers may be caused.
Stop operation during frequent power outage.
The machine should be stopped during frequent power outage due to thunderstorm or other
such external events. Operating with an irregular power supply may cause equipment
damage. If you cannot find the cause of failure, please contact the service engineers of our
sales dept.
CAUTI N
Reserve enough maintenance space
For safe operation, please reserve at least 1 cubic meter maintenance space around the
conveyor. Do not put anything into this area.
Regular check and maintenance
Check and maintain the device regularly to make sure it is in safe operating condition.
Should you have any question, please contact us.
Stop operation in case of failure or other problems
If the conveyor is abnormal or broken, do not keep operating the conveyor. The conveyor
should be stopped immediately. Operation can only be continued after our technicians
checking the conveyor.
Never touch the switches with wet or dirty hands
Touching switches with wet or dirty hands will cause conveyor failure or operator electric
shock.
Keep the machine clean and tidy
Always keep the machine clean and tidy and keep enough illumination.
