Installation Manual ET-/MT-xx8 Table of contents
Page 4 of 75 R. STAHL HMI Systems GmbH / IM_ET_MT-xx8_en_V_01_00_07.docx / 26.02.2018
8.9.4 Yoke 27
8.9.5 Mounting accessories 27
8.9.5.1 Fixing bolt 27
8.9.5.2 Device holder 29
8.9.6 Mounting –step by step 30
8.10 Mounting on stand with keyboard 41
8.10.1 View 41
8.10.2 Dimensions 41
8.10.3 Keyboard 42
8.10.4 Mounting –step by step 43
8.11 Mounting sun roof 45
8.11.1 View 45
8.11.2 Dimensions 45
8.11.3 Sun roof 46
8.11.4 Mounting –step by step 47
8.12 Mounting sun protection 54
8.12.1 View 54
8.12.2 Sun protection 54
8.12.3 Mounting –step by step 55
9Elektrical installation 56
9.1 Status LED 56
9.2 Connection overview terminal assignment 56
9.3 Terminal view VESA 200 standard 59
9.3.1 SERIES 600 59
9.3.1.1 Variant TX (copper) 59
9.3.1.2 Variant SX or LX (fibre optics) 59
9.3.2 SERIES 400 / 500 60
9.3.2.1 Variant TX (copper) 60
9.3.2.2 Variant FX (fibre optics) 60
9.4 Terminal view VESA 200 Top Connect 60
9.5 Connection overview to KVM Box 61
9.5.1 Variant TX (copper) 61
9.5.2 Variant SX or LX (fibre optics) 61
9.6 Elektrical connection VESA 200 standard - step by step 62
9.6.1 Earthing 62
9.6.2 Supply and data lines 64
9.7 Elektrical connection VESA 200 Top Connect - step by step 69
9.7.1 Earthing 69
9.7.2 Supply and data lines 71
9.8 Accessories 72
9.8.1 Keyboard KBDi-USB 72
9.8.1.1 View VESA 200 standard 72
9.8.1.2 View VESA 200 Top Connect 72
9.8.1.3 Connection and wiring keyboard 73
10 Release notes 74
