• This active speaker system must be connected to a mains (AC) outlet to work properly and must be earthed
to operate safely.
• Ensure that correct AC mains voltage and socket - tted with a real ground connection - are available
before powering up the unit.
• Check mains power cable and plugs before switching on the equipment. If the mains cable and/or plug are
damaged, replace the whole cable immediately. For your own and other people’s safety, never repair or
modify the mains power cable. Dispose of the defective cable properly for waste and recycling purpose.
• After following the instructions outlined above, if your powered speaker fails to function, please contact your
vendor. Under no circumstances should the cabinet be opened. Leave all servicing to qualied personnel.
• Electrical appliances must never be used in conditions of high humidity or heat. To prevent any risk of re
or electric shock, never spill or splash liquids on the amplier. Should this happen, unplug the power cable
from the mains outlet and switch off the powered speaker immediately.
• May we draw your attention to the instructions printed on the rear panel of the cabinet.
• Make sure that the cabinet is placed or installed in such way that it can never injure people
• Do not place objects which are sources of heat on the speaker cabinet such as lighting equipment
or smoke machines.
IMPORTANT SAFETY INSTRUCTIONS
READ AND KEEP THESE INSTRUCTIONS. HEED ALL WARNINGS.
WARNING
Exposure to extremely high noise levels may cause permanent hearing damage. Please use this amplied
speaker responsibly for you and your neighbourhood..
CLEANING
Do not attempt to clean the plastic enclosure with solvents or petrochemical based cleaners.
MARKING & CONFORMITY
• The CE mark on this product means it conforms to the EMC Directive (2004/108/CE), CE marking Directive
(93/68/EEC) and Low Voltage Directive (2006/95/EC).
• The “Crossed-out Wheelie Bin” is to draw your attention to the WEEE (Waste Electric & Electronic
Equipment) Directive (2002/96/EC). It means this apparatus must be collected separately for recycling.
• “RoHS compliant” means this device conforms to the (2002/95EC) Directive on the restriction of the use of
certain hazardous substances in electrical and electronic equipment, such as: Mercury, Lead, Cadmium,
Hexavalent Chromium, Polybrominated Buphenyl (PBB) and Polybrominated Diphenyl Ethers (PBDE).
MENU MP3 Player
Repeat
MODE USB /SD/Bluetooth SWITCH
EQ Equalizer
FOLDER - Last Folder
FOLDER+ Next Folder
TRACK Last Music Song
TRACK Next Music Song
Stop/Play
FUNCTIONS
1. MP3 player / Bluetooth Controls.
By pushing the mode button you can choose to use the USB/SD card player, the Bluetooth media
transfer or neither. In Bluetooth mode the display will show unconnect till you make a connection
from your smartphone. To do so go into your settings, go into Bluetooth, look into the list of
unknown Bluetooth units for the speaker, connect and allow your music player in your smartphone
to connect with Bluetooth. Once connected the display on the speaker will show connected , open
the MP3 and master volume to hear the result.
2. LEVEL: Volume of USB /SD player & Bluetooth
3. LEVEL: Volume of Microphone input
2
3
4
5
6
7
15
14
1
8
9
10
11
12
13
17
18
16
