LightTheme™ Mode
Create a professional light show in just a few minutes – no programming time, plug-
and-play, suitable for any moment of your event!
Imagine a remote with buttons corresponding to different moods, dance styles,
events, and more.
Press a button and all LightTheme™ compatible lights connected by a DMX cable
start their show, creating a complex and complete lighting presentation.
Dance style themes synchronize to the music. An event style like “wedding,” while
transforming slowly, creates a fairy-tale atmosphere.
And where do you fit in?
If you are a DJ, concentrate on your music. Add accents, blackouts and flashes, or
just let the program run until you choose another button.
If you are hosting an event, concentrate on your guests and let the show run itself.
There’s no programming necessary! The lights are self-sufficient and are completely
synchronized. Best of all, you don’t need to understand how a DMX mixer works.
LightTheme™ compatible lights can handle standard DMX mixers, work as a
standalone device in colour mode, or by using LightTheme™.
LightTheme™ compatible fixtures include Pars, Ecopars, Moving heads, Effect lights,
LED bars, and more.
Using one LightTheme™ fixture
Press the menu button, use the up and down buttons to select the Auto mode and
press the enter key to confirm. Then, use the up and down buttons to choose the
theme that best fit your mood (Th-1 to 13). Press enter again to control the sensibility
to the music thanks to the up and down buttons (se-1 to 9).
Using several LightTheme fixtures
1. Connect LightTheme-compatible fixtures using a standard DMX cable
(see the DMX 512 connections section).
2. Choose the first light as a controller (see the One Light Theme fixture procedure)
or connect the LightTheme remote control (sold separately) with a DMX cable..
3. On the other lights, select either theme slave A or B, which are complementary
presets specifically programmed for each theme. To do that, with the menu
button, select the slave mode (SLAv) and press the enter key to confirm.
Then use the up and down buttons to select Slave A or B (SL-A or B).
4. Select the theme that best fits your mood on the first fixture or on the remote control.
5. Enjoy!
