SST Automation GT100-IE-MPI Manual de usuario

EtherNet MPI Adapter

GT100-IE-MPI

User Manual

V 2.0

SST Automation

Email: [email protected]

www.SSTAutomation.com

WWW.SSTAUTOMATION.COM

Important Information

Warning

The data and examples in this manual cannot be copied without authorization. SST Automation reserves the right

to upgrade the product without notifying users.

The product has many applications. The users must make sure that all operations and results are in accordance

with the safety of relevant fields, and the safety includes laws, rules, codes and standards.

Trademark

is the registered trade mark of SST Automation.

Technical Support Contact Information

www.sstautomation.com

E-mail: support@sstautomation.com

WWW.SSTAUTOMATION.COM

Catalog

1 Product Overview ......................................................................................................................................................1

1.1 Product Function ............................................................................................................................................ 1

1.2 Product Features ............................................................................................................................................. 1

1.3 Technical Specifications .................................................................................................................................1

1.4 Related Products .............................................................................................................................................2

1.5 Revision History .............................................................................................................................................2

2 Hardware Descriptions .............................................................................................................................................. 3

2.1 Product Appearance ........................................................................................................................................3

2.2 Indicators ........................................................................................................................................................ 4

2.3 Interface ..........................................................................................................................................................4

2.3.1 Power Interface ................................................................................................................................... 4

2.3.2 Ethernet Interface ................................................................................................................................ 5

2.3.3 S7 Bus Interface .................................................................................................................................. 5

2.3.4 Reset Button ........................................................................................................................................ 6

3 Hardware Installation ................................................................................................................................................ 7

3.1 Mechanical Dimension ...................................................................................................................................7

3.2 Installation Method ........................................................................................................................................ 7

4 Quick Start Guide ...................................................................................................................................................... 8

5 Configuration Instructions .........................................................................................................................................9

5.1 Configuration Interface Description .............................................................................................................. 9

5.2 Home .............................................................................................................................................................. 9

5.3 Parameter Settings ........................................................................................................................................10

5.3.1 Basic Settings .................................................................................................................................... 10

5.3.2 Serial Interface Settings .................................................................................................................... 11

5.3.3 Ethernet Interface Settings ................................................................................................................ 11

5.4 Download ..................................................................................................................................................... 12

6. Portal Programming ............................................................................................................................................. 13

6.1 System Requirement .................................................................................................................................... 13

6.2 Programming ................................................................................................................................................ 13

7. Use Case ................................................................................................................................................................. 20

www.SSTAutomation.com

1 Product Overview

1.1 Product Function

The GT100-IE-MPI is an adapter which is used for Ethernet communication of Siemens SIMATIC S7 series PLC

(including S7-200, S7-300, S7-400), Siemens CNC (840D, 840DSL, etc). It supports data monitoring.

1.2 Product Features

Supports multi-master communication, the expansion port can be connected to touch screen or other masters.

Baud rate adaptive.

Automatically query the master station address and display the address list.

It can be directly installed on the PPI/MPI/PROFIBUS DP communication port of PLC without external

power supply.

Supports Siemens S7 Ethernet communication drivers, including MicroWIN, STEP7, WinCC, SIMATIC

NET, KEPServerEX, etc.

Supports 16 Ethernet TCP/IP connections, allowing 16 PCs to collect PLC data at the same time.

1.3 Technical Specifications

[1] DB9 communication port:

Interface type: TIA/EIA RS-485 compatible, ESD: ±15KV, up to 32 nodes.

Protocol supported: Siemens S7 bus multi-master protocol, supports PPI, MPI and PROFIBUS DP.

Baud rate (bps): 9600, 19200, 45450, 93750, 187500, 500K, 1.5M.

[2] Ethernet port:

Network port type: a 10M/100M adaptive network port.

Protocol supported: S7TCP, 16 TCP/IP connections.

[3] Power: 24 VDC (11~30 VDC), 100mA(24VDC).

www.SSTAutomation.com

[4] Operating temperature: 32℉~140℉(0℃ ~ 60℃). Humidity: 5%~90% (non-condensing).

[5] Dimensions (W*H*D): 0.67 in *2.56 in *1.29 in (17mm*65mm*33mm).

[6] Installation: Siemens S7 PLC DB9 communication port plug.

[7] Protection Level: IP20.

1.4 Related Products

The related products include: GT200-DP-RS, GT200-PN-RS and GT200-PN-3RS, etc.

To get more information about related products, please visit SSTCOMM website: www.sstautomation.com.

1.5 Revision History

Revision

Date

Chapter

Description

V2.0

03/20/2021

ALL

New release

www.SSTAutomation.com

2 Hardware Descriptions

2.1 Product Appearance

Notes: This picture is for reference only. The product appearance is subject to the actual product.

Extended S7 Bus Interface

S7 Bus Interface

Indicators

Optional Power Interface

Ethernet Interface

www.SSTAutomation.com

2.2 Indicators

Indicator

State

State description

Troubleshooting

PWR

Supply of power is normal

N/A

OFF, Flashing

Supply of power is abnormal

Check the power supply

BUS

The baud rate is correct and the gateway

is functioning normally

N/A

Flashing (for 1

seconds)

The same station address exists on the

S7 bus

Modify the station address of the

module through the web page

Flashes twice at 1Hz

after a few seconds

interval

Baud rate is not detected

Check the PLC communication port

OFF

Gateway or indicator failure

Contact technical support

Flashing

Communication response frequency

N/A

Link

Network is connected

N/A

OFF

Gateway or network failure

Check local and remote network

connections

Active

Flashing

Communication is normal with remote

devices

N/A

OFF

No communication

N/A

ON, not flashing

quickly

Ethernet failure

Contact technical support

2.3 Interface

2.3.1 Power Interface

The power interface is an optional interface. It’s not recommended to use it. The gateway can get power when

connecting PLC using S7 bus interface. If PLC itself cannot provide power, you can connect power interface to

power it.

Function

+24V

GND

www.SSTAutomation.com

2.3.2 Ethernet Interface

The Ethernet interface uses an RJ-45 connector. Its pin (standard Ethernet signal) is defined as below:

2.3.3 S7 Bus Interface

1) S7 bus interface X1

X1 interface is DB9 male port, which can be directly inserted into the communication port (PPI port, MPI port or

PROFIBUS DP port) of S7 series PLC. The pin definition of the communication port is the same as that of the

PLC, among which pin 3 is the B line of RS485, pin 8 is the A line of RS485, and pin 5 is the logic ground. Pin 7

is the positive of the 24VDC power supply of the PLC, and pin 2 is the ground of the 24VDC power supply. The

24VDC power supply of pin 2/7 is used as the default power supply input. The baud rates supported by the X1

interface include: 9.6K, 19.2K, 45.45K, 93.75K, 187.5K, 500K and 1.5Mbps.

RS485_A (Pin 8)

GND (Pin 5)

RS485_B (Pin 3)

Description

TXD+, Transmit Data+

TXD-, Transmit Data-

RXD+, Receive Data+

Bi-directional Data+

Bi-directional Data-

RXD-, Receive Data-

Bi-directional Data+

Bi-directional Data-

Function

GND of 24VDC

RS485, B

GND

24VDC

RS485, A

www.SSTAutomation.com

2) Extended S7 bus interface X2

The X2 interface is a DB9 female port, which is used to connect Siemens communication equipment (such as

Siemens touch screen, CP5611 communication card, etc.). The supported baud rates include 9.6K, 19.2K, and

187.5K.

2.3.4 Reset Button

The reset button is used to restore the gateway to factory settings. Long press the button for 5 seconds and release

the button when the BUS indicator is solid green. The default IP is 192.168.1.188. Visit 192.168.1.188 in web

browser to configure the gateway.

www.SSTAutomation.com

3 Hardware Installation

3.1 Mechanical Dimension

Size (width * height * depth):

0.67 in *2.56 in *1.29 in (17mm*65mm*33mm)

3.2 Installation Method

Using Siemens S7 PLC DB9 communication port plug.

Tabla de contenidos

Otros manuales de Adaptador de SST Automation

SST Automation

SST Automation GT100-EI-RS Manual de usuario

SST Automation

SST Automation GT100-EI-RS Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario