Ssl SD704M Manual de usuario
SD704M
2
1. WELCOME
2. WARNING
6. Panel Arrangement
7. Panel Button Control Instruction
8. Main Menu Touch Operation
9. OSD Setup
10. Adjust Mode
11. Remote Control Function
12. Disc Play Touch Operation
13. CD/MP3 Operation Interface
14. RDS User Operation
15. Radio Operation
16. DVD Basic Operation
17. VCD Basic Operation
18. CD/MP3 Basic Operation
19.Other Play Mode
20.
Accessory
3. NOTE
4. Features
5. Basic Operation
Trouble Shooting
21.Wiring Diagram
22.Specifications
23.
3
3
4
5
6
7
8
12
13
14
15
17
18
19
21
22
32
35
37
38
39
40
41
INSTRUCTIONS
1.WELCOME
2.WARNING
1. Please keep the disc slot clean, wipe it off when there is some dirt on it. You should
wipe off any dirt on the disc before you place it into the unit. If the disc is dirty and you
place it inside the unit, it will cause the unit to go into an error and will not play the
disc. Please ask professional to clean the laser.
2. Playing the radio at higher volumes for a long period of time may cause hearing
issues. You should play this unit at a moderate listen level.
3. This unit is set up by precision parts. If you open up this unit, you will void any and
all of your warranty.
4. Please do not touch LCD display with any hard object so that you prevent it from
getting scratched or damaged.
5. To avoid an accident caused by watching the LCD screen. This unit has a vehicle
lock out wire so that you will not be allowed to watch a video while driving down the
road.
6. This unit is meant for a 12V power and negative ground system from a vehicle.
NOTE:
We keep improving this product all the time. There may be some changes in it that are
not in this manual.
Thank you for enjoying series of digital car A/V product.
To properly use this product, please go through this instruction manual for installation
and operation, put it in a safe place for future use!
3
INSTRUCTIONS INSTRUCTIONS
4 41
3.NOTE
● This unit can play the following disc
23.ACCESSORY
Accessory Quantity
User Manual 1PC
Wire
USB Cable
Keys
Remote controller
Warranty card
2PCS
1PC
1PC
1PC
2PCS
4.FEATURES
INSTRUCTIONS INSTRUCTIONS
DVD PLAYER
1. MPEG-4 Decoder Technology
2. Compatible with MP4 (AVI/5.X), DVD (DVD-R/DVD-RW), VCD,
SVCD, CD-RW, WMA, MP3, JPG
3. Supporting Multiple Subtitles, Angles, Languages
4. Child lock function
5. 4-Channel Audio Output
6. Pause, Play, Up/Down, Stop, Zoom, PBC Function
RADIO
1. AM/FM Radio Tuner
2. 30 Radio Preset Stations (18FM, 12AM)
LCD DISPLAY
1. 7” - 16:9 TFT LCD Display
2. Touchscreen
5
40
Power supply
Power range
Max operate current
Dimensions
Ground system
FM tuner
European requency range f
Signal/Noise ratio
Stereo separation
Search station volt
Distortion rate
AM tuner
Limit noise sensitivity
DVD PLAYER
Signal/Noise ratio
Frequency response
DC 12V
10.8-16.0V DC
10A
155X182X53MM
Negative ground
87.5-108MHz
55dB
30dB
20-30dBuv
1.5%
522-1620KHz
32dB
70dB
20Hz-20KHz
22.SPECIFICATIONS:
USA frequency range 87.5-107.9MHz
European requency range f
USA frequency range 530-1710KHz
Amp Rating 85 Watts x 4 Channels
5.BASIC OPERATION
1. SOURCE ON/OFF
Press SRC button on panel or SOURCE button on remote control quickly to power on.
Press SRC button on panel or SOURCE button on remote control longer to power off.
2. PLAYING SOURCE CHOOSE
Press SOURCE button on remote control, unit will switch sources in the following
sequence: RADIO → DVD → AUX
3. MUTE CONTROL
Press MUTE button on panel or MUTE button on remote control shortly to turn off
sound output, press again to back to sound output.
4. VOLUME ADJUSTMENT
1) Press VOL+/VOL- button on panel, VOL+/VOL- button on remote control or touch
button on display to adjust volume level.
2) The volume setting on this unit is 0 - 39.
BASS, TREBLE, BALANCE & FADER ADJUSTING (SELECT)
Press SEL button on remote control to choose your desired Bass, Treble, Balance &
Fader level:
NOTE:
1) DVD playing mode, MBP & User will be automatically activated.
2) After 5 seconds you choose desired mode, do not adjust volume button. The mode will
automatically take you back to status before adjustment.
5. RESET
1) If unit is not working correctly, you should press the RES button. This will reset the
radio and should start working correctly afterwards.
2) After reset, all settings will resume back to the factory default settings.
VOL BAS TRE L/R
F/R
INSTRUCTIONS INSTRUCTIONS
6 39
21.WIRING DIAGRAM
This player is equipped with ISO standard connector, please follow below instruction:
● Yellow – 12 V Constant
● Black – Ground wire
● Blue - Power Antenna / Remote Amp Turn On
● Orange – Back-Up Camera Trigger (+) ● Pink – Parking Brake (-)
● White/White black - Left front speaker (+-)
● Purple/Purple black - Right rear speaker (+/-)
● Green/Green black - Left rear speaker (+/-)
● Red - ACC ON (+12V) ● Grey/Grey black - Right front speaker (+/-)
Note:
The “PARKING BRAKE” wire must be connected to the parking brake system
of your car. When the parking brake is engages, the LCD will be allowed to view
your video. If not, the screen will produce an image saying, “PARKING BRAKE”.
This is a safety feature designed for the driver not to watch a video while driving.
The video output on this unit will not be affected by this.
INSTRUCTIONS INSTRUCTIONS
6.PANEL ARRANGEMENT
7
38
1 2 3 4 5 6 7 8 9 10 11 12
17 18
19
13 14
15 16
20.TROUBLE SHOOTING
After ignition
switch off, setting
information all lose
Remote control no
function
Poor performance
of radio station
Can not load disc
Can not play disc
Can not switch
language/subtitle
No image
PROBLEM
Can not power on
CAUSE
Check whether power fuse
blew or not
Some factor cause MPU wrong
operation
No enough power supply
from battery
Disc is scratched
Put wrong side of disc into unit
Lens has dirty
There is only one language/
subtitle in disc
Video line between unit and
TV is not properly connected
SOLUTION
Change fuse same as the old one
Press RESET button on the panel by pen
point, then, power on
Check whether antenna is connected or not,
or poor connection
Change new disc
Slot in the disc with sign side up
Clean lens by lens clean disc
If disc is not with multi-language/subtitle, it
cannot switch language/subtitle
Reconnect lines
Improper length of antenna,
poor connection of antenna
grounding
The disc will not go in all
the way
Change the wiring around
Change battery in remote control
Remove the 2 screws on top of the radio
Wrong connection between
ignition line ACC and
Constant 12 Volt wire
INSTRUCTIONS INSTRUCTIONS
8 37
19.OTHER PLAY MODE
AUX IN:
AUX IN OPERATION
1) Press “Source” button on remote control or touch “AUX” on the touch screen, to
switch to AUX mode.
2) This will allow you to listen and or watch any source that you have plugged into this
section of the radio.
3) This unit has 1 - Video RCA input & 1 pair of Audio RCA’s for this feature.
CCD (Back-Up Camera)
1) If there is a back-up camera installed onto your car, you will need to connect it to
the CCD video input.
2) When you are backing up the car there you will see this image on your screen.
3) You can set CCD image according to your car's own position in general setting mode.
7.PANEL BUTTON CONTROL INSTRUCTION
1.Power On/Off/Function MODE button
2.Disc Out button
3.SELECT Button
4.BAND/SYS /P.N button
5.AMS Program Preset/Play Repeat button
8.Pause button
9.Disc load slot
10.SD socket
11.Aux In
12.USB socket
13.UP Adjustment(TFT Screen)
14.DN Adjustment(TFT Screen)
15.PIC Color Selection button
16.MUTE / TFT on/off button
17.
18.TFT Display Screen Extend/Retreat
19.Reset button
INSTRUCTIONS INSTRUCTIONS
10. CD Program Play
In CD mode, you can set the sequence of playing by the program function, the operation
is as follows:
When CD is playing, press ST/PROG button, then the display shows:
Input the number of the song you want to program by the remote control, program the
first song, input your desired song, for example, the sixth song, and press number button
6 on the remote control. Program the second song, press button move the cursor to
2 . Input your desired song, for example, the ninth song, press number button 9 on
the remote control. Press button to program play.
Back to the normal mode, press the ST/PROG button, then press button.
Note: This function can only be worked by the remote control.
11. MP3 Program Play
In MP3 mode, you can set the sequence of playing by the program function, the
operation is as follows:
When MP3 is playing, press ST/PROG button, then the display shows:
Then, input desired song by remote control.
For example: Program the first song, input 01, press button move the cursor to the
second lattice, input desired song, for example the third song. Program the second song,
press button, work with button, move the cursor to 2 . Input 01, press button
move the cursor to the second lattice, input desired song, for example, the sixth song
(press 6). Press button to program play.
Back to the normal mode, press the ST/PROG button and then press button.
Note: This function can only be worked by the remote control.
PROG
TC
3 _ _ : _ _
4 _ _ : _ _
TC
7 _ _ : _ _
8 _ _ : _ _
5 _ _ : _ _
6 _ _ : _ _
TC
11 _ _ : _ _
12 _ _ : _ _
9 _ _ : _ _
10 _ _ : _ _
TC
15 _ _ : _ _
16 _ _ : _ _
13 _ _ : _ _
14 _ _ : _ _
PLAY DELETE
1 _ _ : _ _
2 _ _ : _ _
PROG
TC
3 _ _ : _ _
4 _ _ : _ _
TC
7 _ _ : _ _
8 _ _ : _ _
5 _ _ : _ _
6 _ _ : _ _
TC
11 _ _ : _ _
12 _ _ : _ _
9 _ _ : _ _
10 _ _ : _ _
TC
15 _ _ : _ _
16 _ _ : _ _
13 _ _ : _ _
14 _ _ : _ _
PLAY DELETE
1 _ _ : _ _
2 _ _ : _ _
9
36
1. Power On/Off/Function MODE button
Press this button for short moment to turn on power,and long press it to turn off power.
Every button-press to switch audio source mode.
Rotate this button clock wisely to increase the volume lever,rotate it anti-clock wisely to
decrease the volume lever.
2. Disc Out button
Press this button can eject the disc.
3. SELECT Button
Press this button to adjust each function setting according to everyone's favorite.
After you choose one function setting mode,you can use voice adjust button for adjustment.
4. BAND/SYS /P.N button
In radio mode, press this button to switch band, every time to choose band, the
sequence is as follows: FM1 FM2 FM3 AM1 AM2
In playing state, press this button to switch video system, AUTO, NTSC, PAL.
5. AMS Program Preset/Play Repeat button
Under radio mode, press this button for a short moment to start scanning preset programs.
Under PLAY mode, press it to repeat playing a single song, and press it again to turn
off this function.
8. Pause button
In playing state,press this button to execute play/pause.
OUTLOOK AND BASIC FUNCTION
INSTRUCTIONS INSTRUCTIONS
Slide in CD/MP3 disc, unit will play it automatically. If disc is in slot, press DVD touch
button on main menu can to play.
1. Repeat Play
In CD/MP3 mode, press AMS/RPT button on remote control, to startup following, repeat
CD disc: Single song repeat→ Repeat play off.
MP3 disc: Single song repeat→Directory repeat→ Repeat play off.
2. Fast Forward/Fast Rewind
Press SEEK + / SEEK - button on remote control, or / touch button on display to
speed forward or backward playing.
Note: Hold above button a bit longer to operate.
3. Previous/Next Song Play
In playing mode, press SEEK + / SEEK - on remote control, or / touch button on
display to choose previous/next song.
4. Pause Play
In play mode, press button on remote control, or button on display to pause.
Press again to go back to normal play.
5. Stop Play
In play mode:
1) Press button on remote control to enter the pause mode, the position will be stored
in unit. At that time, press button on remote control or touch button on display to
resume playing at the stored position.
2) Press button on remote control twice to enter into stop mode, here, press
button on remote control or touch button on display, unit will play from the first song.
6. OSD
In playing mode, short press OSD on remote control to show all information of present
disc.
7. Randomly Play
In CD mode, press LOC/RDM button on remote control, to instantly play each song.
Press again to back to the normal play.
8. EQ Mode
1) This function can only be worked by remote control.
2) When playing CD/MP3, press the “EQ” button on the remote control, you can
choose the sound mode.
9. OPEN
Press button on pedestal to eject disc.
18.CD/MP3 BASIC OPERATION
10 35
9. Disc load slot
Opening for disc to enter or retreat.
10. SD socket
This is a high-spees transmission interface, which can read high-capacity
date in MP3 or MP4 format.
11. Aux In
External connected audio input.
12. USB socket
Connect the USB memory to this socket, and the unit can play music format files
supported by this unit in the USB memory
13. UP Adjustment(TFT Screen)
After the display screen is extended, press this button to adjust the upward
view angle of the screen in 5 setps of adjusting angle.
14. DN Adjustment(TFT Screen)
After the display screen is extended, press this button to adjust the downward
view angle of the screen in 5 setps of adjusting angle.
15. PIC Color Selection button
Short press this button to chroma setup in the following level:
16. MUTE / TFT on/off button
Press this button to shut off the sound output, re-press this button can resume
the sound output, long press this button can turn off the TFT LCD display.
Bright Soft Sharp Standard Self Set
Tabla de contenidos
Otros manuales de Receptor de coche de Ssl
Ssl
Ssl SDC20 Manual de usuario
Ssl
Ssl DD899B Manual de usuario
Ssl
Ssl SD364B Manual de usuario
Ssl
Ssl SD732MB Manual de usuario
Ssl
Ssl SD511MB Manual de usuario
Ssl
Ssl SD802 Manual de usuario
Ssl
Ssl SD810TS Manual de usuario
Ssl
Ssl SD743TST Manual de usuario
Ssl
Ssl ML42B Manual de usuario
Ssl
Ssl DD888 Manual de usuario
Ssl
Ssl SD730M Manual de usuario
Ssl
Ssl SD735 Manual de usuario
Ssl
Ssl DD890I Manual de usuario
Ssl
Ssl S559C Manual de usuario
Ssl
Ssl DD888 Manual de usuario
Ssl
Ssl DD661B Manual de usuario
Ssl
Ssl SD435B Manual de usuario
Ssl
Ssl SD325B Manual de usuario
Ssl
Ssl SD750TST Manual de usuario
Ssl
Ssl SD555MB Manual de usuario
