SSD Drives TS8000 Series Manual de usuario

TS8000

Link RTN Option

8000/LK/00

HA470411U001 Issue 1

WWW.SDS.LTD.UK | 0117 9381800

All rights strictly reserved. No part of this document may be stored in a retrieval system, or

transmitted in any form or by any means to persons not employed by an SSD Drives

company without written permission from SSD Drives, Inc.

Although every effort has been taken to ensure the accuracy of this document it may be

necessary, without notice, to make amendments or correct omissions. SSD Drives cannot

accept responsibility for damage, injury, or expenses resulting there from.

Companies, names and data used as examples herein are fictitious unless otherwise

stated. All trademarks and copyrights are acknowledged as the property of their

respective owners.

WWW.SDS.LTD.UK | 0117 9381800

Table Of Contents TS8000 Option Card

Table of Contents

Product Overview ............................................................................................ 3

General Description ....................................................................................... 3

Safety Information..........................................................................................4

Contents Of Package .....................................................................................4

Specifications .................................................................................................. 5

Power Requirements.......................................................................................5

Serial Communications .................................................................................. 5

Fiber Optic Communications ..........................................................................5

Installation Instructions ..................................................................................... 7

Hardware Diagnostics ...................................................................................... 9

Module LED Status .........................................................................................9

Network LED Status........................................................................................9

Diagnostic Codes......................................................................................... 10

Software Configuration................................................................................... 11

Configuring The Link System......................................................................... 11

Configuring The TS8000 HMI ....................................................................... 13

Version 1.00.00 Page i

WWW.SDS.LTD.UK | 0117 9381800

Product Overview TS8000 Option Card

Product Overview

•Configured with DSD software.

•Noise-free fiber optic interface to any other

devices on the high speed Link network. RS-

232 serial comms interface to the TS8000

HMI.

•24vDC powered by an external supply.

•DIN rail mountable for ease of use.

•Installation and connection hardware

included with card.

General Description

The 8000/LK/00 option card provides a high speed interface (2.7Mbit) between the

TS8000 series HMI and a Link fiber optic network. This module is similar to a 6055/LINK

TechBox, but can be mounted on standard DIN rail instead of being plugged into a drive.

The option card has two fiber optic terminals that accept 1000 micron acrylic fiber. The

transmit strength over the Link network can be adjusted via a 3-position toggle switch. In

addition, the option card also provides a standard RJ-style serial jack for connection to a

TS8000 HMI.

The 8000/LK/00 requires the use of an external 24vDC power supply connected to

terminal block TB1.

Page 3 http://www.SSDdrives.com

WWW.SDS.LTD.UK | 0117 9381800

Product Overview TS8000 Option Card

Safety Information

All safety related regulations, local codes and instructions that appear in the manual or on

equipment must be observed to ensure personal safety and to prevent damage to either

the instrument or equipment connected to it. If equipment is used in a manner not

specified by the manufacturer, the protection provided by the equipment may be impaired.

Do not use the controller to directly command motors, valves, or other process actuators

not equipped with safeguards. To do so can be potentially harmful to persons or

equipment in the event of a fault to the controller.

Contents Of Package

The option card will come shipped with the following additional equipment:

•8000/LK/00 option card.

•Hardware mounting packet.

Page 4 http://www.SSDdrives.com

WWW.SDS.LTD.UK | 0117 9381800

Specifications TS8000 Option Card

Specifications

The following specifications pertain to the TS8000 series option cards. SSD Drives retains

the right to modify specifications at any time, without prior notice.

Power Requirements

Power is supplied to the option card from an external 24vDC supply connected to terminal

block TB1 (200mA rated inrush, 65mA steady state).

Serial Communications

Cable Type: SSD Drives part number CM471054 (Standard TS8000 Comms).

Fiber Optic Communications

Fiber Type: SSD Drives part number CM056316U030.

•Core Diameter: 1000 micron.

•Cable Type: Acrylic.

•Bending Radius: > 1 inch (25.4 mm).

•Insulation: Vinyl > 1kV.

Transmit Strength Settings: Switch SW1.

•Center Position: Low intensity – 0-20 m transmit range (0-66 ft).

•Up Position: Medium intensity – 21-40 m transmit range (67-132 ft).

•Down Position: High intensity – 41-60 m transmit range (133-196 ft).

Page 5 http://www.SSDdrives.com

WWW.SDS.LTD.UK | 0117 9381800

Installation Instructions TS8000 Option Card

Installation Instructions

The following specifications pertain to the TS8000 series option cards. SSD Drives retains

the right to modify specifications at any time, without prior notice.

To install the option card, remove all power and I/O communication cables from the unit.

Snap the 8000/LK/00 onto a standard DIN rail.

Connect the RS-232 cable from the option card to the RS-232 Comms port of the TS8000.

Connect the Receive Fiber into the black connector and the Transmit Fiber into the blue

connector. The fiber optic loop should be closed with the Link network as shown below:

Connect external 24v DC power to both the TS8000 and the 8000/LK/00.

Page 7 http://www.SSDdrives.com

WWW.SDS.LTD.UK | 0117 9381800

Tabla de contenidos

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-521 Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

Advantech

Advantech TPC-30 Series Manual de usuario