Sricam SP017 Manual del propietario
Indoor IP Camera
Quick User Manual
EN/DE/IT/ES/FR
Customer Service
Monday - Saturday
9:00-18:00 Beijing Time (UTC +8)
E-Mail: [email protected]
Skype ID: tech.sricam
Website: www.sricam.com
For Videos of how to setup IP Cameras please visit Website: www.sricam.com/videos
Products Introduction
Before starting setup
Make sure of the following:
- Your router supports the 2.4GHz frequency band (802.11b/g/n).
- Your router DHCP is enabled.
- Your smartphone is connected tothe Internet with a WLAN/Wi-Fi that the camera will connect with.
- You know the WLAN/Wi-Fi password.( No special characters in the password and Wi-Fi SSID such
as @#$%^&*).
- Your smartphone, camera, and router should be within about 8 feet during setup. After your camera
is set up,you can move the camera to your preferred location(the configurations are saved to camera
system）
-For Videos of how to setup IP Cameras please visit Website: www.sricam.com/videos
-1-
Hardware Installation
1: Screw the mount on the wall with the two screws
Provided.
2: Loosen the thumb screws to adjust the mount to
the desired position. Once the position is set, tighten
the screws securely.
English
Reset
MicroSD
card Slot
SP020SP017
(Connect the camera to a Router or Switch with a RJ-45 Ethernet cable.)
Step1-3: Reset to default setting (After power on the camera,
you hear a clash sound from the camera. The Reset Button of SP020 is
next to USB Port)
Step1-2: Connect the camera to the network.
Start setup
then keep pressing the RESET button using a Reset Pin , until
Step1-1: Power the IP Camera
Step1. Product Connection
Step2. Sricam APP Installation
:Scan the QR code to download the“Sricam” App.
Search“Sricam”on Google Play or iOS App Store
-2-
RESET
English
1069813
WAN LAN
Step3. Register an APP User Account
-3-
3-1
Keep password
Keep password
Note: The “Device ID” can
be found on the label which is
attached to the camera.
Add deviceAdd device
IPCam
1069813
Next
Input password(default:888888)
Input the email
Please creat
a complex password
for App account, please don't
input your email password
0551876
Step4. View the Camera on a Smart Phone (Open the “Sricam”App and follow these steps)
Note: Here take camera
ID:1069813 as an example.
Forgot Password?
Forgot Password?
English
-4-
Note: Please use a
complex password for the device.
Password should be 6-9 characters
long(A-Z, and 0-9)Without
special characters.
Note:
Tap this button for setting
APP“Authority, Multi-Media, System,
About us,
Update, Logout. ”
IPCam Add new device
Authority: Open “Audio / Pan Tilt /...”
Multi-Media: Check “Video Playback/ Local Pictures
/ Alarm List”
Add device
Wi-Fi Setting
Change Admin Password
Password modify succeed
want to connect to Wi-Fi network?
The device is online.For the security,you’d
better change the password immediately
Change Password
Modify
Input old admin password
Input new admin password
Input new admin password
1069813
Sricamsales
Input Wi-Fi Password
4-8
English
Drop-down to refresh
-5-
Live video stream on smart phone
9
For configuring and watching live videos on Windows PC, please download SricamPC
software and user manual at website:
www.sricam.com/download
Please visit:
www.sricam.com/faqs
More FAQs:
1. How to restore the camera to factory settings
2. How can I add the camera to my 2nd phone
3. Camera ID, Camera Password, App Account ID and Password
4. How to setup Alarm Record
5. How to watch live streams with ONVIF clients
-If you fail to setup the Wi-Fi network in step 4-7, please make sure your smart phone is not
connecting to a 5G Wi-Fi signal. You can resolve this issue by 1) reconnecting to a non-5G
Wi-Fi signal on your smart phone or 2) skip this step and setup the Wi-Fi by going through the
steps under “settings”>“Network Setting” on the app.
-For any other quality and setup issues,it is recommended you insert a pin (until you hear a
clash sound) to reset the IP camera.
-If the IP camera can't be found in step4-4, please make sure you have done step 1-3 to insert
a pin to reset the IP camera and wait for 30 seconds.
-If you experience inconsistent signal,it could be due to 1)too many devices sharing the same
internet network.Or 2)the IP camera is too far from the router if using Wi-Fi connection.
Microphone
9.Pan & Tilt
2.Screenshots
English
-6-
FAQ1: MicroSD card record and playback setting
1) Insert the microSD card to the camera
2) MicroSD card format and record setting
Log in “Sricam” App and follow the steps:Settings -> Record Setting -> SD card Formatting-> Record Switch
Tap " Playback" for playback the record on MicroSD card,as pictures below (Note: each record is 30 minutes)
FAQ1-1 FAQ1-2 FAQ1-3
3) Record Playback(on App)
(Note: If you use 64G or 128G SD card can't recording, you need to format the SD card to FAT32 format on
your PC. If the SD card recording is full,it will automatically loop coverage, you do not need to manually delete
the video file.)
Record Setting
SD Card Free Space:827M
SD Card Formatting
Record Type
Record Switch
SD Card Total Space:3784M
Manual Record
Alarm Record
Timing Record
Devices List
IPCam
Add new device
Modify Settings
DeletePlayback
Settings
IPCam
Device information
Time Setting
Media Setting
Security Setting
Network Setting
Alarm Setting
Record Setting
!
1
2
Playback-63
Devices List
SD card videos
Latest 1 day Latest 3 days Latest 1
month months
Lastest 3
Phone local videos
disc1/2017-02-02_14:00:00_S.av (1123S)
disc1/2017-02-02_13:30:00_S.av (1800S)
disc1/2017-02-02_13:00:00_S.av (1800S)
IPCam Add new device
Modify Settings DeletePlayback
1
2FAQ1-4 FAQ1-5
Log in “Sricam” App and follow the steps: Settings >> Playback
English
-7-
English
FAQ2: How to Setup Motion Detection Alarm
Step1: Enable motion detection alarm
Step1-1: Tap “Settings” button >> “Settings” >> “Alarm setting” be the alarm setting window as pictures FAQ2-1 ,
FAQ2-2 and FAQ2-3.
Step1-2: Enable “Motion Detection Alarm” and “Alarm Switch” as FAQ2-3
Devices List
IPCam
Add new device
Modify Settings
DeletePlayback
Settings
IPCam
Device information
Time Setting
Media Setting
Security Setting
Network Setting
Alarm Setting
!
1
2
Alarm Setting
Email Alerts
Motion Detect Sensitivity(The most sensitive’0’)
Motion Detection Alarm
Push Notifications Account
Receive Notifications
Unbound
Alarm Switch
Buzzer Alarm
Email Alerts
Save
Sender:
Please input sender’s mail address
SMTP server:
Select the email SMTP server...
port:
Please input the port number
Password:
Encryption mode
Receiver
Email: Input the email
Input password
No encrypt SSL encrypt TLS encrypt
Email: Input the email
Step2: Choose motion detection alarm notification types
There are 3 types you can choose to get the alarm notification.
·
Phone push alarm
Enable “Receive Notifications” then the camera will push notification to your smart phone when an alarm is activated. Push
notification account is default as the Sricam app login account. If don’t need this function, you can delete the push account.
·
Buzzer alarm
Enable “Buzzer Alarm” then the camera’s buzzer works when an alarm is activated.
·
Email Alerts
The alarm notification will send to your designated email address.
Tap " Email Alerts", and fill in the email information as below guide
2. SMTP server: The server address for the Sender's email account.
3. Port: Please select 587 or 465 if the SMTP address is mtp.gmail.com, Smtp.mail.yahoo.com or smtp.live.com(Hotmail.com).
If not, please select 25.
4. Password: input password
5. Email: Enter up to three receiving email accounts (e.g., you may have both [email protected] and Marcy@yahoo. com)
as picture FAQ2-4
If failed to setup Email Alert, please activate your Gmail or Yahoo Email account, Please check FAQS 8 in website：
www.sricam.com/faqs
Produktvorstellung
Vor der Inbetriebnahme
Stellen Sie Folgendes sicher:
- Ihr Router unterstützt das 2,4 GHz-Frequenzband (802.11b / g / n).
- Ihr Router DHCP ist aktiviert.
- Ihr Smartphone ist über WLAN / Wi-Fi mit dem Internet verbunden, damit die Kamera darüber verbunden werden kann.
- Denken Sie daran, dass das WLAN / Wi-Fi-Passwort (keine Sonderzeichen im Passwort und im WLAN-Namen
wie @ # $% ^ & *) beinhalten darf.
- Für Videos von der Einrichtung von IP-Kameras besuchen Sie bitte Website:
www.sricam.com/videos
Netzanschluss Netzanschluss
Linse Linse
Micro SD
Karten Slot
Micro SD
Karten Slot
Netzwerkanschluss Netzwerkanschluss
8
Hardware Installation
1.Schrauben Sie die Halterung an die Wand mit den
beiden Schrauben
2.Lösen Sie die Rändelschrauben, um die Halterung an
die gewünschte Position anzupassen.
Sobald die Position eingestellt ist, ziehen Sie die
Schrauben fest an.
Deutsch
Reset
SP020SP017
Setup starten
Schritt2. Sricam APP Installation
Methode 1: Scannen Sie den QR-Code, um die "Sricam" App herunterzuladen.
Methode 2: Suchen Sie "Sricam" auf Google Play oder im iOS App Store
Schritt 1. Produktanschluss
Schritt 1-1: Schalten Sie die IP-Kamera ein
Schritt 1-2: Schließen Sie die Kamera an das Netzwerk an (schließen Sie die
Kamera an einen Router oder Switch mit einem RJ-45 Ethernet-Kabel an.)
Schritt 1-3: Setzen Sie die Standardeinstellung zurück (Drücken Sie nach
dem Einschalten der Kamera die RESET-Taste mit einem Reset-Stift,
bis Sie einen Klirr-Ton von der Kamera hören. Die Reset-Taste des SP020
befindet sich neben dem USB-Anschluss)
9
RESET
Deutsch
1069813
WAN LAN
Otros manuales para SP017
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Cámara IP de Sricam
Sricam
Sricam SP009 Manual de usuario
Sricam
Sricam SP007 Manual del propietario
Sricam
Sricam SP008 Manual del propietario
Sricam
Sricam NVR Wireless Kit Guía del usuario
Sricam
Sricam SP009 Manual de usuario
Sricam
Sricam AP011 Manual de usuario
Sricam
Sricam AP Series Manual de usuario
Sricam
Sricam SP005 Manual del propietario
Sricam
Sricam SP020 Manual del propietario
Sricam
Sricam SP005 Manual del propietario
