Squareled Othello Manual de usuario

SquareLED - Othello

Manual | Othello

1. Safety Warning

Squareled products are designed and manufactured to meet the requirements of People’s Republic of China

and international safety regulations. Modications to the product could aect safety and render the product

non-compliant to relevant safety standards. Instructions pertaining to continued protection against re, electric

shock, and injury to persons are found throughout this manual. Please read all instructions prior to assembling,

mounting, and operating this equipment.

IMPORTANT

ALWAYS READ THE USER MANUAL BEFORE OPERATION. PLEASE CONFIRM THAT THE POWER SUPPLY STATED

ON THE PRODUCT IS THE SAME AS THE MAINS POWER SUPPLY IN YOUR AREA.

• This product must be installed by a qualied professional.

• Always operate the equipment as described in the user manual.

• A minimum distance of 0.5m must be maintained between the equipment and combustible surface.

• The product must always be placed in a well ventilated area.

• Always make sure that the equipment is installed securely.

• DO NOT stand close to the equipment and stare directly into the LED light source.

• Always disconnect the power supply before attempting and maintenance.

• Always make sure that the supporting structure is solid and can support the combined weight of the

products.

ATTENTION

This product left the place of manufacturer in perfect condition. In order to maintain this condition and for safe

operation, the user must always follow the instructions and safety warnings described in this user manual.

• Avoid shaking or strong impacts to any part of the equipment.

• Make sure that all parts of the equipment are kept clean and free of dust.

• Always make sure that the power connections are connected correct and secure.

• If there is any malfunction of the equipment, contact us immediately.

• When transferring the product, it is advisable to use the original packaging in which the product left the

factory.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to

• such an extent that their eectiveness is not conformable.

Manual | Othello

2. Fixture Overview

1) Lens

2) LCD display

3) Menu-button

4) Down-button

5) Up-button

6) Enter-button

7) PowerCon in

8) Fuse

9) Switch

10) DMX 3-pin out

11) DMX 3-pin in

12) DMX 5-pin in

13) DMX 5-pin out

Manual | Othello

3. Features

Othello is a low power high output LED moving head. An incredibly ecient 480W white LED engine, provides

output comparable with traditional 1200W discharge lamp xtures.

• Source: 480WWhite LED

• CT: 6500K

• Life: >20,000 hrs

• Power supply: AC 100-240V, 50/60Hz

• Power consumption: 650W

• Color: 1 Color Wheel with 7 dichroic lters plus open, full and split gels function,two directional rainbow

eects. CMY variable color mixing for innite color possibilities. CTO color temperature linear change.

• Gobo: 2 rotating Gobo Wheels, each one has 6 interchangeable glass gobos plus open. Index,shake and

bi-directional rotation at variable speed.

• Zoom: 13-37° linear zoom

• Focus: Motorized, auto focus function

• Iris: Step-less, 5-100% linear change iris with pulse eects

• Prism: 3-facet circular rotating prism

• Frost: 1 frost lter

• Dimmer: 0-100% smoothly adjustable

• Strobe: 0-20 Hz variable speed, pulse and random strobe

• Pan/Tilt: 540°/270°, 16 bit resolution, position memory, auto correction after unexpected movement.

• Control mode: DMX512, Manual

• DMX channel: 26/33

• Net weight: 32 Kgs

• Dimension: 708x410x308 mm

4. Installation Instructions

• The installation must always be secured with a secondary safety attachment, e.g. an appropriate safety

cable.

• Never stand directly below the device when mounting, removing or servicing the xture.

• The operator has to make sure the safety and technical installations are approved by an expert before

taking using this xture in the eld for the rst time.

• Fixed installations must be inspected by a skilled person on a regular basis.

• Overhead mounting requires extensive experience, including amongst others calculating working load

limits, installation material being used, and periodic safety inspection of all installation material and the

device. If you lack these qualications, do not attempt the installation yourself. Improper installation can

result in serious bodily injury.

Manual | Othello

Attachment Instructions

• Attach the Omega clamp on the bracket by tighten the M12 bolt on the bracket to the hole in the middle

of the bracket.

• Insert the quick-lock fasteners of the bracket into the respective holes on the bottom of the xture.

• Tighten the quick-lock fasteners fully clockwise.

• Install the second Omega clamp.

• Attach the safety-cable through the holes on the bottom of the base. Attach to the trussing system or

other safe xation point.

• Be sure the safety is fully looped, the quick-link is attached and fully tighten.

• Inspect for complete attachment before lifting over-head.

Manual | Othello

5. Dimensional Drawings

Manual | Othello

6. Mounting Orientations

Be sure this xture is kept at least 0.5m (1.6ft) away from any ammable materials (decoration etc.). Always use

and install the supplied safety cable as a safety measure to prevent accidental damage and/or injury in the event

the clamp is improperly installed or fails.

Overhead mounting requires extensive experience, including amongst others calculating working load limits, a

detailed knowledge of the installation materials being used, and periodic safety inspection. This safety inspec-

tion must cover all installation material, trussing, hardware and the xture. If you lack these qualications, do

not attempt the installation yourself. Improper installation can result in sever injury and possible death if struck

by a falling xture.

Manual | Othello

7. Linking Fixtures

The Othello xture operates on standard DMX512 link controlled by a DMX console. The number of xtures on

a link will be determined by the combined number of channels required by all the xtures. An Othello xture

requires a 26/33 channel footprint on a standard DMX512 link. Attach the xture to the link using data-grade

cable and 5-pin or 3-pin XLR cable connectors.

Cable Connectors

The Othello xture accepts both 3-pin and 5-pin XLR cable connectors. Cabling must have a male XLR connector

on one end of the cable and a female XLR connector on the other end.

To link one or more xtures to a DMX controller:

• Connect the male XLR connector of a DMX Data cable to the controller’s DMX Data Outconnector.

• Connect the Data cable’s female XLR connector to the Data In connector of the rst (or next) xture on the

DMX link.

• Continue linking the remaining xtures connecting a cable from the Data Out connector of each xture to

the Data In connector of the next xture on the link.

Manual | Othello

DMX Terminator

For installations where the DMX cable has to run a long distance or is in an

electrically noisy environment, a DMX terminator on the last xture of the

link prevents data reection, which can corrupt the data communication on

the link.

Terminate the link by installing a 120 ohm, 1/4 watt (minimum) terminator

in the xture’s Data Out (female) cable connector in the last xture on each

DMX link.

8. Fixture Control Board

Using the Control Board to set the starting DMX address or make other settings. The functions provided are

described in the following sections.

(MENU) Scroll through the main menu or exit from the current sub-menu.

(DOWN) Scroll‚DOWN‘ through the menu list or decrease the value of the current function.

(UP) Scroll‚UP‘ through the menu list or increase the value of the current function.

(ENTER) Enter the currently selected menu or conrm the current function value.

Address 001-512 DMX address setting

Fixture

Channel Mode

Standard 33Chs

Reduced 26Chs

Pan/Tilt

Invert Pan O/On

Invert Tilt O/On

Swap Pan-Tilt O/On

Curve

Curve 1

Optional dimmer

curves

Curve 2

Curve 3

Manual | Othello

Manual Reset

Head Reset Reset except P/T

Pan/Tilt Reset Reset only P/T

All Reset Reset whole light

Channel For manual control of the attribute channels

Auto Test

Stop

Auto test programs ,

in order to test the functional components of the xture,

the default status is“Stop”.

Auto program 1

Auto program 2

Auto program 3

System

Language Chinese/English

Backlight Setting Auto/Keep On

Display Normal/Invert

Factory Reset OK/Cancel

Information Device/Lamp Usage information of the xture

9. Channel Assignments

This product have two DMX512 channel conguration: (Standard) and (Reduced).

Mode/Channel Value Function

Reduced Standard

1 1 Pan

0-255 0-100%

2 2 Tilt

0-255 0-100%

3 3 Pan ne

0-255 0-100%

4 4 Tilt ne

0-255 0-100%

5 5 Pan/Tilt Speed

0-255 Fast -> Slow

6 6 Dimmer

0-255 0-100%

Tabla de contenidos

Otros manuales de Foco de Squareled

Squareled

Squareled Spectrum Mini 12x10W RGBAW 5in1 Manual de usuario

Squareled

Squareled MATRIX-5X10W Manual de usuario

Squareled

Squareled BLADE 5 Manual de usuario

Manuales populares de Foco de otras marcas

VIZULO

VIZULO Micro Martin Guía del usuario

EuroLite

EuroLite LED IP FL-100 SMD Manual de usuario

Cooper Wheelock

Cooper Wheelock XB12 Manual de usuario

Allen + Roth

Allen + Roth 17624-000 Manual de usuario

ADJ

ADJ 4 STAGE PAK Manual de usuario

Cooper Lighting

Cooper Lighting EGL91SW233 Manual de usuario

Max

Max 37496 Manual de usuario

BEGA

BEGA 85 143 Manual de usuario

Beamz

Beamz 151.226 Manual de usuario

EuroLite

EuroLite LED IP FL-8 Manual de usuario

Ledj

Ledj PERFORMER 36 RGB Manual de usuario

Perel

Perel ELS3 Manual de usuario

Perel

Perel ELS3WD Manual de usuario

LumX

LumX LM 36130 Manual de usuario

Xtricity

Xtricity 4-80053 Manual de usuario

Stahl

Stahl 6521/4 Series Manual de usuario

Ecosense

Ecosense EcoSpec Manual de usuario

Ayrton

Ayrton minipanel FX Manual de usuario